FLEXI RESIN/ Install video spelling corrected longer start

Поділитися
Вставка
  • Опубліковано 23 жов 2024

КОМЕНТАРІ • 25

  • @matrixresin3884
    @matrixresin3884 2 роки тому +1

    Shocking workmanship this is how to bodge a job trust me

  • @CaptainFaffer
    @CaptainFaffer 3 роки тому +3

    They can't be charging enough if they have to cut the wheelbarrow liner with an old blunt chisel 😂

  • @harryyoung7163
    @harryyoung7163 4 роки тому +1

    Wow what a brilliant finish if your anywhere near Gatwick message back and I’ll get you to do my drive👍 35 m2

  • @Terry-Tibbs
    @Terry-Tibbs 3 роки тому +3

    Cowboys.
    Laying over the slabs & poor sub base.

  • @chrisaddison8530
    @chrisaddison8530 2 роки тому

    As the header says flexi ....damm right laying on slabs .. don't even clean out the buckets so not even a consistent mix nor is there tape on the brick edge to protect it ..like someone else said cowboys

  • @islandhoppers6186
    @islandhoppers6186 Рік тому

    Straight over the dpc

  • @williambennett26
    @williambennett26 4 роки тому

    Gosh I wonder how much that cost. Even DIY it would be top dollar.
    Anybody know how much per square metre including hire of mixer.?

  • @OscarRodriguez-ds8ft
    @OscarRodriguez-ds8ft 4 роки тому

    Ways you located

  • @paulbolton7232
    @paulbolton7232 5 років тому

    Trying work out that tune some kind of weird remix of brian adams summer of 69

    • @jordanleigh7345
      @jordanleigh7345 4 роки тому

      Paul Bolton dunno where u got that from don’t sound anything like it

    • @an-N-and-an-E-and-a-Wubble-U-C
      @an-N-and-an-E-and-a-Wubble-U-C 3 роки тому

      It sounds very similar to that dancing round the world video where the lad does his funny dance in different countries

  • @mattpenfold1562
    @mattpenfold1562 4 роки тому +2

    Your mixing makes me feel depressed you don’t even scrape out the buckets

  • @OctoberMoon10
    @OctoberMoon10 4 роки тому

    You are not talking about the process. You need to talk your way through the process. This is NOT FOR ( DIY )

  • @jjg5836
    @jjg5836 4 роки тому

    That is shocking 😭

  • @jordanleigh7345
    @jordanleigh7345 4 роки тому

    Who cling films wheelbows they made to get dirty haha

    • @mattpenfold1562
      @mattpenfold1562 4 роки тому

      It keeps the resin from sticking lol

    • @BigDuttyDeezeHD
      @BigDuttyDeezeHD 4 роки тому +1

      Everyone who has any idea what there doing does

    • @gjforextrading5758
      @gjforextrading5758 3 роки тому

      I'm 90% sure no primer is put down🙈...big no no!!

    • @advent3774
      @advent3774 2 роки тому

      It’s so every new batch is not contaminated with the previous batch

  • @michealdelaney4783
    @michealdelaney4783 3 роки тому

    m

  • @shaun...6838
    @shaun...6838 4 роки тому +6

    Laying this over paving 👎👎👎👎

    • @jordanleigh7345
      @jordanleigh7345 4 роки тому

      S.d. It’s only on the footpath tbf so it will be alright I wouldn’t personally do what they did but as it’s only gonna be walked on don’t see it going anywhere

    • @shaun...6838
      @shaun...6838 4 роки тому +1

      There is too much movement in individual paving slabs especially if there not layed correctly so i think personally it will crack in time.

    • @jordanleigh7345
      @jordanleigh7345 4 роки тому +1

      S.d.yh that’s true. Also might be down to the customer not wanting to pay for the labour to take it up then get rid of it then re do the base