How to Use the SpeedyJig Monkey's Fist Jig Tutorial
Вставка
- Опубліковано 23 сер 2024
- Get Great Quality Paracord Here ▶ paracordweaver...
GET MY FREE EBOOK ▶ www.weaversofe...
Marlinspike ▶ paracordweaver...
Paracord Lacing Needles ▶ paracordweaver...
Paracord Jig ▶ paracordweaver...
Paracord Tools ▶ paracordweaver...
Hardware ▶ paracordweaver...
Join this channel to get access to perks:
/ @theweaversofeternity
Support This Channel on Patreon ▶ / weaversofeternity
--------------------------------------------------------------------
--------------------------------------------------------------------
Welcome to The Weavers of Eternity official paracord tutorial channel! Here you'll find paracord tutorials, videos, tips, tricks, and lessons on everything related to paracord weaving, paracord bracelet making, knot tying, and paracord education. Please enjoy your stay and subscribe for new content on a weekly basis.
#paracord #weaversofeternity
Hey Weavers! I realize it's a little disappointing for me to show a product, only for you to see that it's out of stock, BUT I have just spoken with the good people at Speedyjig and they're looking to have their stock back in by the end of next week. They're still recovering from the holiday season, so your patience is appreciated! I'll post the full detailed review of this product when they are back in stock! :)
Excellent description and instructions. I have the process now and just need to get the tension of each loop to be consistent. Thanks
I just got my first jig today! The tutorial was very helpful, thanks!
I like how you explained every step so far this was the easiest way to do it i got it on the first try.. thanks
Just did my first one watching this video and using the Speedy jig plus. Very Nice!
Great to hear!
Can you tell me the best brand paracord to use for making a monkeysfist or at least the brand you use in your videos?
I ordered paracord from ParacordPlanet and I'm not having any luck with it.
It's very easy to make this jig, and very inexpensive
i made one... i suck so bad i can't even do it with a jig. lmao
Nice video. Thank you!
Thank you for the video but can you please make a video of just the tightening part at the end? My monkeys first looks fantastic when I take it off the jig and then I screwed up trying to tighten everything. I had probably done at 50 times and had to start over.
Is it possible to use this jig to cover a 1.25 inch steel hex nut?
July 2022. Which is the Best Monkey Fist Jig for Pool Table Size Balls and smaller in size? Has anything changed since this video has been made and are there better videos to watch?
Do you ever make them and sell Them please Comment back would love to know thank you
Great video... Wasn't really sure how to make the fist. I do wish you explained your technique in righting everything up at the end. I feel like I am stuck and not doing well.
If you're having trouble with tightening, I've got a video dedicated to that here: ua-cam.com/video/oW12Yhr3Ixk/v-deo.html Hope that helps!
Very easy to follow !! Great job !
Hey, i bought a roman helmet paracord bead with 2 holes in the top and open on bottom for cord to go through. I was going to make an king cobra but am having an issue with placement of thr helmet. I wanted it in the center of the bracelet but cannot think of a way to do it. Any ideas? Thank you. :)
Nice monkey fish i had gotten the hangs of it after a few times around in order to get good at you have to keep messing with it
How long is the paracord
Hey am a new subscriber I started to try some of the things u have made and it's going pretty good.like your vids very mucho.
Awesome! Thanks for subscribing!
When you start the wraps, are you holding it in the center of the 6’ length?
Hi Elizabeth, no the monkey's fist doesn't start from the center of the cord. Depending on what you're making you would measure out 1-3' and then start wrapping from there. Then you would have two ends coming out of the monkey's fist and you could then finish it from there.
¿Que tipo de cordón usas?
How do you finish it with such a short end?
I just made one using half inch arborist rope heh... No weight or filler needed 😁
What are the sizes of this design?
How do i know, based on the planned number of passes, how much cord to start with?
I've done a video about that, you can see it here: ua-cam.com/video/fRok5Y1LgqA/v-deo.html
Hi no and I did try it on a 80 K and Anglehart damn thing better Oaxaca ended on the damn speedy jig
Gidday. been trying all day to tie this damn monkey fist. It isn't as easy as it looks the first time around! nor the second, third, fourth, or fifth. I gotta ask. when you lay the paracord on the jig you start wrapping anti-clockwise, but when is it 1 pass? Is it when you get back to where you started or what? and any tips for tightening such as where you start. Oh hell! Can ya just do it for me? lol!
Where you hold your initial cord to one of the posts of the jig, that counts as the first wrap. The next time you get to that point it is your second pass.
Nice video. What is the maximum diameter of ball you can use, with this jig.
He used a pool ball one time I think that is the biggest it goes
How much cord do you use for different sizes of monkey fists
I realize that I'm a year late to the party, but for anyone else wondering the same thing, I find that 8 feet is ideal for a one inch steel ball bearing
You went to fast at the part of synching ???
love how you make a tutorial, then speed over and don't explain one of the important parts.
He never responds.
First of all I was OK with the jig when I took it off my hands which is ironic because when I did use a jig I actually could make a monkeys fist by the way why does the monkeys fist have to be with five strands why not four strands just out of curiosity.
Went to buy it and it is unavailable
video was going great until you sped thru the part about tightening everything up. first timer here and i had no idea had to start over
If you need tips for tightening, please check out this video here: ua-cam.com/video/oW12Yhr3Ixk/v-deo.html
The tightening part is killing me wish you wouldn’t of fast forwarded that part lol
I have a dedicated video talking about tightening and tips for tightening. You can see it here: ua-cam.com/video/oW12Yhr3Ixk/v-deo.html
?donde terminó , el hilo
Looks too flimsy to use with 3-ply rope.
Love when you watch a video all about Patreon for 30sec, then you too the video about jig, then goto the link, Currently unavailable
Patreon is a big part of what helps this channel continue going on, so I think 30 seconds is a minor thing that the average viewer can overlook if they don't want to support via that route, which is totally fine. As for the jig being out of stock, unfortunately I'm not in control of if Speedyjig keeps their items in stock. As far as I know they are a family owned company so you may have to just have a little patience for these things. You can always go to their website and sign up for e-mail notifications for when the item is re-stocked.
The Weavers of Eternity Paracord Tutorials I was going to comment on the unavailable product link also. Nice Tut. Will be waiting for the full review.
Useless 😂
Make a jig yourself for 10c.
Hey Weavers! I realize it's a little disappointing for me to show a product, only for you to see that it's out of stock, BUT I have just spoken with the good people at Speedyjig and they're looking to have their stock back in by the end of next week. They're still recovering from the holiday season, so your patience is appreciated! I'll post the full detailed review of this product when they are back in stock! :)