They are little more then boxes for holding the speakers. Which is fine....... As long as you don't throw on a label like "Top-notch stage sound system" It takes a lot more then that to be considered "Top Notch" line array speakers. That requires being paired and tuned to match the frequency range. Without that they are simply a stack of speakers.
Yes they do that some companies give you the specs sound specs which you can't give until the subwoofer and the amplifier are installed and you can get the readings but they give it anyway for the empty cabinet
Proud to here watching From Middle East Saudi Arabia Dammam City between Jubail City Express Highway Service Right Road Way OFW MIGRANTS WORKING ABROAD WORLD WIDE INTERNATIONAL UNIVERSE 11 MILLION Pilipinos....25 December 2020.....merry Christmas and happy New year
Hello so these are trapezoid style speakers aligned like a “line array” speaker system. In actuality they are typical sound system speakers as would be found in any 80’s style sound system. The hi frequency horns are what really defines a line array for coverage and control of the sound
Those boxes won't work as an array source because of the gaps between the HF guides. Doesn't worth it really. Also, I really doubt there were made any calculations during design so you should be lucky enough to hope that it reproduce on the out something compatible to the input.
a ơi có đôi vỏ thùng loa a ray bat 30 nào cu không ki niệm vừa bán vừa cho e 1 đối đi nơi thật với là e Theo dõi kênh của a lâu lắm rồi nhưng không có tiền mua
Hope you don’t mind me chipping in because you probably won’t get an answer from the UA-camr. I’m a woodworker and audio person who has been making speakers for 50 years. The answer to your question is not straight forward because it has more to do with other factors such as the enclosure design, the drivers used and the crossovers. They all influence the sound relatively speaking more so than the material used. Back in the day chipboard was commonly used because it was cheap and easy to work with but the cut ends required filling or a veneer. MDF is great but it’s extremely heavy. With P.A speakers 19mm (3/4”) in common because the timber is stable and doesn’t swell like chipboard or MDF if it happens to get wet. All three will work fine with a good enclose design and appropriate bracing etc where required. They are using some type of plywood because it’s best for that application. MDF would weigh a ton.
Nice work and beautiful God bless ur hand work.pls sir can u teach me on line how to make it and the measurements I love ur work I wish I could build for my self
LOL! At 1:27 The picture gets very blurred right after he turned on the table saw. It spooked me for a sec. I thought something bad was about to happen.
'Top notch line array'... Without using gaskets, with enormous gap between HF drivers, with selfsecuring bolts that don't even get screwed on far enough, without any cable from flightpoint to drivers to secure them when wood collapses (fire or enclosure failure)...and the list goes on.
This guy needs his own UA-cam channel and give this back to the real Mr. Electricity. His videos were much more entertaining.
I miss the old videos of recoiling dead electric motors, soldering electric components, refurbished amplificator etc.
oh yeah, those slippers in the workplace 😎
They are little more then boxes for holding the speakers. Which is fine....... As long as you don't throw on a label like "Top-notch stage sound system" It takes a lot more then that to be considered "Top Notch" line array speakers. That requires being paired and tuned to match the frequency range. Without that they are simply a stack of speakers.
Yes they do that some companies give you the specs sound specs which you can't give until the subwoofer and the amplifier are installed and you can get the readings but they give it anyway for the empty cabinet
Big like👍👍 beautiful array speaker system 👍👍💖💖
Just one word comes to mind Impressed !!
Hi
Proud to here watching From Middle East Saudi Arabia Dammam City between Jubail City Express Highway Service Right Road Way OFW MIGRANTS WORKING ABROAD WORLD WIDE INTERNATIONAL UNIVERSE 11 MILLION Pilipinos....25 December 2020.....merry Christmas and happy New year
I'm use
Ppl
Greets from Poland
helper nya hemat biaya... bini sendiri.... good job brother🙏👍👍
Hello so these are trapezoid style speakers aligned like a “line array” speaker system.
In actuality they are typical sound system speakers as would be found in any 80’s style sound system.
The hi frequency horns are what really defines a line array for coverage and control of the sound
Sukses selalu dan tetap berkarya👍
Dimensions? Drivers? Thiele-Small parameters? Performance? Specifications? Build technique is superb, I’d like to try these myself.
Those boxes won't work as an array source because of the gaps between the HF guides. Doesn't worth it really. Also, I really doubt there were made any calculations during design so you should be lucky enough to hope that it reproduce on the out something compatible to the input.
Parabéns 👏👏👏👏 excelente trabalho 🇧🇷🇧🇷🇧🇷🇧🇷😎
olha nós aqui........... segue meu instagram @flvsom e ver as minhas caixas.
Хочу такие домой, красота, Супер.
Trop cool
a ơi có đôi vỏ thùng loa a ray bat 30 nào cu không ki niệm vừa bán vừa cho e 1 đối đi nơi thật với là e Theo dõi kênh của a lâu lắm rồi nhưng không có tiền mua
Nice work and where are you found and how can we get connected, I need those same speakers.
it's wonderful very good work
I'm in Ghana and I want to learn how to make line arrays speakers. Please any courses available online
I have Cerwin Wega speakers made of chip board very silent and deep bass. I wonder if this hard board speakers will sound better??
Hope you don’t mind me chipping in because you probably won’t get an answer from the UA-camr. I’m a woodworker and audio person who has been making speakers for 50 years. The answer to your question is not straight forward because it has more to do with other factors such as the enclosure design, the drivers used and the crossovers. They all influence the sound relatively speaking more so than the material used. Back in the day chipboard was commonly used because it was cheap and easy to work with but the cut ends required filling or a veneer. MDF is great but it’s extremely heavy. With P.A speakers 19mm (3/4”) in common because the timber is stable and doesn’t swell like chipboard or MDF if it happens to get wet. All three will work fine with a good enclose design and appropriate bracing etc where required. They are using some type of plywood because it’s best for that application. MDF would weigh a ton.
@@grahamserle7930 Wow! That's a tonne of knowledge. Now I do understand why. Thank you so much.
@@EddywaKenya You're very welcome, only too happy to share with others.
*CONGRATULATION* 😎👍
Kren buatannya...👍👍
the best. mr
Great stuff
Very good
After the paint roller, wat was there sprayed on to get the effect, basecoat or clear paint ?
cool, hand made speakers....good jobs.....I like it
Nice work and beautiful God bless ur hand work.pls sir can u teach me on line how to make it and the measurements I love ur work I wish I could build for my self
Nice video where can i get the line array rigging to buy please.
good job
MALANG SUMAWE Hadir 👍
Glad to see Mrs. Electricity gets stuck in too.
मुझे खरीदना है अपना मोबाइल नंबर भेजो
Excellent work.
Any calculations for speakers? Or just imagined dimensions? Bad material for boxes.
Very nice program thanks
Genius!!!!!
super 👌💗💗💗💗
Great quality work keep it up and also make jbl and peavey 3 way speaker
Cool stuff. Very skilled woodworking.
That cluttered wood shop would drive me crazy
SALUDOS, DONDE PUEDO CONSEGUIR ESOS PLANOS...??? GRACIAS
Pretty impressive! Thanks for sharing!
Very information and interesting
Hi guys!
Could you send me some speaker designs for me to make for myself?
Greetings from Croatia!!
Ps ....... Just keep going !!
do you have plans with BOM for sale?
Beautyful acustic boxes.
Looks like a speaker sweat shop.
Very nice!
LOL! At 1:27 The picture gets very blurred right after he turned on the table saw. It spooked me for a sec. I thought something bad was about to happen.
Good job bro
Bác ở đâu em đặt cặp vỏ array bass 25
Amazing the sound boxes
Nama besi plat nya apa gan trus belinya di mana ya.. Tolong gan kasih tahu sy tertarik nih
Love this design ❤️ can u share it 👍
Can i order all the hardware accessories you use this?
Is that a for a 12” ?
Exelente trabajo los felicito
Good design. Fair enough.
ad cho em xin kích thước của từng tấm để đóng thành 1 chiếc thùng
Love From #TechnicalMrinmoy
Fantastic work. I wish if can have 4 of this here in South Africa
I love these videos. I just wish they had some health and safety laws! Peace.
seems at changsha?
I love the guy with the stapler and the bedding! where are the speakers?
@Jackie Apreil they too poor to afford speakers were too poor to afford wood, lmao
@Jackie Apreil the world is full of criminals and perverts. protect yo kids from their ideas.
can you sell this ready array housing? if yes, how can i get them in Kenya?
'Top notch line array'... Without using gaskets, with enormous gap between HF drivers, with selfsecuring bolts that don't even get screwed on far enough, without any cable from flightpoint to drivers to secure them when wood collapses (fire or enclosure failure)...and the list goes on.
Nice box
What is the name of the black paint you use that master ,
wooooooooo good
Wow.. good👍
Bạn cho M xin bản vẽ kích thước đc ko bạn ?
Which paint u using for textur pls tell me
Nice
Disculpe una pregunta en donde los fabrican
I see a future for you in the pallet industry.
Saludos, donde puedo conseguir esos planos
Gracias
Complete wooden box price ?
Good joob👍👍👍
mis rrespetos broder
Bang itu yang dempul hitam pakek dempul apa namanya yaa
Chất lượng quá
Woh mantep sahabat salam bersahabatan amin
Hello sir, can i ask you the measurement of this line array, i want to do it my self for my mini sound system? Thank you
looks like a line array, but is defenitly not a Line array
@@SoundhausTVthey are line array, If it not why are the handle are on the side and why is it have bracket(s)
Mamtap salam dari Indonesia
Nice 👍👍👍👍
Ye colour konsa hai
This video..you have a sizee plan sir?
can you pls by any chance give the measurements?
De cuantas pulgadas es el parlante para esa caja
What is the spray that you use at 21:00? Is it some kinda glue/hardener?
Probably some sort of black one part epoxy paint.
Mantap boksnya
what type of paint you used for finishing (brand/model) mind sharing
Saludos.. se ven perfecto... Que tipo de pintura usaron? Y dónde consigo la medida de la caja?.. porfis necesito información
Capaz que lo protean biene una pintura para pintar chsias de auto
Gran trabajo 👌👏
hàng việt nam chất lượng cao
Verygood
What ink him use on case?
I guess that is why Sonus Faber is very expensive because of the premium build quality.
Great Speaker Boxes... Just one thing... We forgot the speakers..
A oi mình có lam thùng loa bán ko a