I had the exact experience with a Kibler. I have been building flintlocks from scratch for more than 20 years and appreciate what goes into the construction. The locks Jim Kibler offers are, to my mind, the best available and I buy them for my own scratch build projects. Thanks for an excellent video.
Good morning Peter. What a beautiful rifle and a job well done. I was hoping you would complete the rifle in this episode and not leave us hanging. Hope your family are all well. Have a blessed weekend my friend and God bless. Thanks for sharing.
Glad to see you back in the shop, Peter. That gun turned out pretty nice. A good way to get a good quality gun " quickly " with all the hard work done for you. Good luck hunting!
Man that was a fantaistic video of the beautiful Kibler Flintlock and you building it. Thank you for your detailed explanation of each step. Your oration and passion for what you do in your video is infectious and keeps us coming back for more. Thank you.
Very nice job on the Kibler kit. I too have a Kibler .54 Woodsrunner kit. I started out with .530 RB's and .015 patching over 70 grains of 2f powder, but have since changed to .535 RB's with .018 patching over the 70 grains of 2f powder. Much tighter groups with this combination. I also upped the charge to 90 grains of 2f for a hunting load and have very good groups with this combination. Kibler has some great kits that are easy to put together. I have 4 total, 2 SMR's (.36 & .45), and a Colonial in .58 cal. in addition to the Woodsrunner. All are good shooters. Good luck on your deer and moose hunting this fall!
Living in Japan, where there are few hunting guns except for a few authorized to cull wild boar or bear, I find this really interesting. I appreciate the craftmanship in everything you do. Wonderful video.
Hey Peter! Mr. Kibler makes a fine kit... and it was a delight to see you assemble & finish yours Once it is sighted in and a load developed... any Moose and Deer should give some thought to making themselves scarce during Hunting Season! One could certainly see that this was not your first time putting a Smoke Pole together! WOW!
As a man much wiser than me (Dad) once said, "Ninety percent of accomplishing anything is just showing up in the right time, at the right place, & with the right equipment. Two and a half percent is composed of skill & an additional two and a half percent is made up of experience. The last five percent is composed entirely of luck!". @@TheWoodlandEscape
Fantastic! You can tell by the smile on your face all the way through this video - that you're more than happy with it. It looks great and fires perfectly! Nicely done - and in a fraction of the time. I look forward to seeing that piece in person sometime. Cheers!
A thing of beauty. The curly maple is outstanding. Still smiling? Do t think that’s coming off anytime soon. Kid in a candy store. My grandpa would Have loved it. And he would have taken me shooting with him. Now for a name. Jenny is going to be so jealous.
Wow, what a great kit. You are going to force me to break open my "emergency" piggy bank my friend, lol. It will be well worth it, that's for sure. Your build came out fantastic, the orange had me scared for a second but the final color is perfect. It's funny how I am getting up there in years and have always been a firearms guy, yet it's only recently that I've been drawn to black powder, cap & ball, flintlock, etc.. Ahhhhh, what was I thinking all of those years?? Lol. Thanks for the video. 👍
There in lies the rub , as I firmly believe that once you’ve smelt that first black powder smoke you’re hooked. The Government should have to label it highly addictive, lol!
Having built several flintlocks from scratch over the years, I can apreciate the lack of labor to put this outstanding rifle together. Outstanding. 54 cal. Is my go-to cal. Also. The only thing that I can see wrong would be the rear sight might be on backwards. Nice job. Ron from vermont
Nice gun. A .54 caliber Kibler Woodsrunner was my first flintlock. I ordered a second (a .58 caliber smoothbore Kibler Colonial American) after two weeks of waiting for the first gun. I have zero mechanical inclination so the guns were just about right for my skill set. Great job putting it together and thank you for creating and sharing such fine content.
Beautiful!. Watching your videos somehow brings me back to when we were kids and used to play "Indians & Cowboys" doing our best to dress as such. I was always an Indian and built my first usable bow & arrows when I was 9 years old. The love for archery perdured to date in me. Not very different from what you do. Keep being a full-grown kid, Peter! Thanks for sharing.
Great Video and Review , I don’t know the last time I saw someone smile that much in a video ! I can see that you are genuinely enjoying yourself with the Kit and that it’s of great Quality . You have a Beautiful place to work there , thanks for Posting this , be getting myself one as soon as funds allow . Thanks again 👍👍
These are absolutely fantastic! I started by building 2 Kibler’s to have a feel of what are the proper dimensions of a flintlock. Practice some carving, making a few extra parts from scratch for the Southern mountain rifle (patch box and nose cap). It allowed me to build some skills to start building some from scratch.
@@TheWoodlandEscape Just happened to find your channel. I will be checking out more of your videos this winter when I have more free time up here in Alaska. Thank you for taking the time to reply.
I purchased the same kit, but currently finishing a Gemmer Hawkins Kit. As soon as I'm done with that one I promptly will begin the Woodrunners. I know I will enjoy building it and firing it next.
That smile at the end when he shot was great! Made me laugh! What a great video. I’m bought my first long gun kit and made a squirrel gun and fell in love with it. Hoping to build a Fowler or a larger caliber for bears/deer. Great video!
I have a Tuĺl 65 cal.I made three at in a winter. Sold two of them, kept one for me. When I load it, I use 610 ball,ten thousand patch, 62 gr. , 4f powder,. I put the sprue down then tamp might down. I have been in a lot of woods walks and alot of novelty shoots . I was never beat. Oh yes, my tiger is setup with no creep. No one else can use it and beat me. My barrel is .62 all the way from breech to mussel, so with a barrel, at .62, ball at .610, patch at .010. IT leaves me at .630 thousands. I was real impressed with your kit. Sure did save time. I haven't shot my Tull in over 10 years went through a bad Devorce. Now I have Sugar. Had my right, foot taken off be low my knee. Just been through too much. Just lost interest in just about everything. I did the Mountin Man for 20 years. I KNOW I got off track. Sorry!! But all in all I like your kit. My camp name is Tuminkz that is( Twominks). Loved your show Keep it up
My friend! I just stumbled across your channel and I subscribed so fast. This was the most relaxing 28 minutes and 35 seconds I’ve felt in a long while. As a historian and lover of the outdoors, seeing all your craftsmanship and enjoyment meant the world to me 😩 I got into black powder recently with my 1877 Springfield trapdoor, just got my first cap and ball revolver too… next step is my own flintlock. Cheers from Croatia!
Congratulations on a fine job! That rifle looks incredible and I think your skills and lifestyle will do that Kibler the justice it deserves! God bless!
Great video! You answered a lot of my questions and hesitations regarding Kibler's kits. I think I might consider another gun now. I've never built from a kit, but your video really showed the ease of Kibler's CNC work.
Brings me back to being a kid in my dad’s gunsmith shop. My first build was when i was 13 a .45 cal Kentucky rifle built off of a Traditions kit. Wished it would’ve gone together that easy.
Great job and great video Peter. I try to build one or two guns a year and I'm just starting a 1770s Virginia from a blank, but i too had to try one of Jim's kits. I went with the southern mountain rifle and hand forged a few of the parts for it. There are a couple of videos of it on my channel. I was highly pleased with the quality of the kit and I recommend Kibler kits to anyone just getting started. Thanks again for the great video. TC
Hi, Turkey Creek, I just subscribed to your channel after reading your post here. Some really fine folks that Peter is gathering around his fire. Blessings, Christiaan from South Africa.
Thanks Christiaan! I look forward to hearing more from you in the future! I absolutely love Peter's channel and have watched many of his videos multiple times. This is a great community that we are part of. TC
That's a lovely rifle. Those CNC lathes are almost witchcraft, they work so fast and accurately. Love your videos.... instructive and entertaining. I am a gunsmith myself (in New Zealand), and my favourite work pieces are the old ones. It's great to get them working properly again. Nothing puts a smile on your face more than a flintlock that works properly. You are right about the work to inlet a stock by hand. It takes a long time. I have an old Hollis S/S shotgun (external hammers) that I use for Western BP shooting (I have lots of solid head brass cases), and a month or so ago I fired two rounds and could not open the gun. The stock had failed where it joins the action, and on getting it apart I found that the stock has been repaired two or thee times before, and the wood was saturated with oil from 100 years of over lubricating., The old girl is at least 100 years old (Damascus barrels), and I didn't have a large enough piece of timber to make a complete new butt stock. What to do? As the gun could not be original any more I decided to splice in a new front half of the buttstock, which involves inletting the action body, two locks, trigger mechanism etc. I have scarf jointed the stock through the grip area, so a bit of cunning staining will be needed to match the wood colour to the original. I have one more lock to do and I can start finishing it. Thank goodness for epoxy glues, although the scarf joint is also pinned. It looks promising, and so far I have spent upwards of 20 hours chiselling away, although I did waste 4 hours of so on the first bit of wood as it had an internal fault that I did not see, so had to start again. Double guns don't leave a lot of timber after inletting... I did an old percussion Westley Richards a decade or two ago and the stock on that had been entirely eaten by borer beetles. The bores were perfect though, so it was worth the effort and it shot really well, I never should have sold it. Yes, flinters work upside down.Mine always have. Keep up the good work 🙂
You are right about the damage oil does to the head of the stock! I find a lot of rifles coming back from India suffer from this, I think they are over oiled, and stored butt down, the oil runs out of the action and soaks into the head, I have several Falling Block rifles like that, the worst one is a 577 Westley Richards that came back(to UK), from India, always a problem with a heavy recoiling rifle to know what best to do, stay safe! Chris B.
Excellent video! Met you at Longhunter School. I own 3 Kiblers. Several corrections on your build . The nose cap screws should have entered from the barrel side. too late to change that, however. Both the rear sight and front sight should be turned around. My Colonial kit is nicely figured plain maple also.
I was surprised and impressed how well everything fitted without a lot of work, a lovely looking rifle that will only get better with honest use....nice one Peter.
Taylor Sapergia of Pr. George BC taught me how to shoot. He makes the best guns I've ever seen, and he built me a .54 Hawken full stock. I started with 90 gr of 2F and primed with 4F in the pan. The gun shoots better than I do. Yours is one sweet gun. It's amazing how accurate that CNC gear can be in making stocks. What a fit! But geez Peter, git yerself a sprue cutting mold, .535, and you can hunt anything on the continent with it. Except for grizz. maybe not him, but most everything else. Work up a load with care, buy a ream of patch material and ignore the looks in the fabric store as you walk around calipering cotton swatches to get the right spec. Keep an eye out for flints in the creek. Keep yer powder dry! And make meat with that thing, what a sweet looking gun.
I used to get together with other guys and just have a bullet casting session. It doesn't take long to cast a hundred round balls, sit around and chew the fat. Another handy item is a loading block for when you're hunting which holds a couple of patched round balls, lubed up and ready to punch into the bore. So much of the black powder gear can be made by the shooter himself, that it really makes it a charming sport. I also make arrows out of ashwood, which may be harder to do since the emerald ash borer made its way here. No idle time!@@TheWoodlandEscape
I just bought myself a Jim Kibler woodsrunner because of your video. I do Rev war battle reenactments as a dragoon with other dragoons. We travel across the North and Southeast recreating history. Love watching your videos recreating the 18th century.
I was always wanting one of them. Kibbler 45 swamp barrel rifle's. I broke my back in the oil filled and it put my dreams to rest. Now I'm on a fixed income and couldn't even afford. I scraped out raffle. It's always nice to set and look at the videos about. These beautiful rifles Thanks for sharing your video.
Oh man! This is one of those facets of shooting I’ve been looking into. Only shot a flintlock once before, and loved it. Seeing that this is something that anyone with basic skills can do, and how this kit pretty much falls together, now I have another mania to pursue. Thank you for sharing this.
Great job on the muzzle loader Peter, love the final look of it. Keep your powder dry. Both my older brothers are into this. As the story goes, both were drawn for mule deer in the great sand hills west of Swift. The oldest one shot a buck, as they were congratulating each other, the buck decides to vacate the area. So he hops up and takes off. Somehow the brother that shot the buck has a empty smoke pole and the other one didn't shoot. After about 3 or 4 miles of tracking him the older one (one one that killed it in the first place) gets another shot and down it goes. When they walked up to it, the other one hands him his rifle and said shoot him again. Take care
This has to be my favourite video to date!I'm absolutely blown away that you can buy such a well made gun and be up and running in a day. Here in the UK you can't imagine the red tape involved I even owning a non working decommissioned antique let alone a functional beauty like that. And as a lifelong woodworker/boat builder/ carver I can see why you went for that finish chap. That maple just came out so good! Andy from Yorkshire UK
I just recently bought a Jim Kibler Colonial American Longrifle, extra fancy maple (54-caliber) with the intention to do a little bit of inlays and carving. But after getting the kit, and seeing how beautiful the figure of the wood I decided to leave it simple. This rifle will be spending a lot of time in the woods of Virginia (deer and bear) hunting, and I know it's going to get a few dings and dents but I'll try to keep it to minimum. The Finnished rifle is beautiful and I will be sighting it in for hunting loads next weekend. I'm looking forward to my next Kibler rifle as soon as I can afford it. (I almost forgot to mention that this is the first time I've build my own flintlock rifle or I should say assembled, as the amount of fitting was minimal, I spent more time on draw filing and browning the barrel and polishing brass.) This is the first time I've seen your channel and I must say that I really enjoyed it.
Very cool show!! I find it a blessing to watch someone enjoying their state and creating tools to enjoy it even more! Keep up the history and great work!
Awesome video! I have a percussion Kentucky long rifle, and have been wanting a flintlock for some time. I believe this video pushed me over the edge!! I will be purchasing one! I just found your channel, and I love your place! New subscriber here!
When you lit that thing off, it put a big grin on my face too! What a beautiful rifle! I am sure you will take some game with it, again and again. I have cast many bullets, and pre heating the mold is always important.
Jim Kibler himself never produced so fine an endorsement of his rifle kit. Good job, Peter.
I’m flattered, thank you.
I had the exact experience with a Kibler. I have been building flintlocks from scratch for more than 20 years and appreciate what goes into the construction. The locks Jim Kibler offers are, to my mind, the best available and I buy them for my own scratch build projects. Thanks for an excellent video.
It is an amazingly well built lock. I’ll be using them on my scratch build as well.
Good morning Peter. What a beautiful rifle and a job well done. I was hoping you would complete the rifle in this episode and not leave us hanging.
Hope your family are all well.
Have a blessed weekend my friend and God bless. Thanks for sharing.
Thanks for the kind words, Michael.
It’s really awesome that you were able to get a Kibler rifle. You deserve the joy of a new rifle.
Thank you for sharing
Thanks William. It will become my faithful companion!
Glad to see you back in the shop, Peter. That gun turned out pretty nice. A good way to get a good quality gun " quickly " with all the hard work done for you. Good luck hunting!
Thanks, Jack.
What an asset you would be to a community in 'your time!'
Kind words indeed, thank you.
Man that was a fantaistic video of the beautiful Kibler Flintlock and you building it. Thank you for your detailed explanation of each step. Your oration and passion for what you do in your video is infectious and keeps us coming back for more. Thank you.
Very flattering words, I thank you.
Jenny may never speak to you again. Lol, You are definitely a Pro, Great hunting with the new Flintlock
She has been sulking about, lol.
Very nice job on the Kibler kit. I too have a Kibler .54 Woodsrunner kit. I started out with .530 RB's and .015 patching over 70 grains of 2f powder, but have since changed to .535 RB's with .018 patching over the 70 grains of 2f powder. Much tighter groups with this combination. I also upped the charge to 90 grains of 2f for a hunting load and have very good groups with this combination. Kibler has some great kits that are easy to put together. I have 4 total, 2 SMR's (.36 & .45), and a Colonial in .58 cal. in addition to the Woodsrunner. All are good shooters. Good luck on your deer and moose hunting this fall!
Great information, Richard. I’m having pretty good results with 90. Still a work in progress
Living in Japan, where there are few hunting guns except for a few authorized to cull wild boar or bear, I find this really interesting. I appreciate the craftmanship in everything you do. Wonderful video.
That gun will do just fine on bear or boar
Such kind words, thank you.
Hey Peter! Mr. Kibler makes a fine kit... and it was a delight to see you assemble & finish yours Once it is sighted in and a load developed... any Moose and Deer should give some thought to making themselves scarce during Hunting Season! One could certainly see that this was not your first time putting a Smoke Pole together! WOW!
I not quite as confident as you, Martin but, when it comes to hunting I’m darn determined, lol.
As a man much wiser than me (Dad) once said, "Ninety percent of accomplishing anything is just showing up in the right time, at the right place, & with the right equipment. Two and a half percent is composed of skill & an additional two and a half percent is made up of experience. The last five percent is composed entirely of luck!". @@TheWoodlandEscape
Yep. That smile says it all.
Well done.
Yup!
Fantastic! You can tell by the smile on your face all the way through this video - that you're more than happy with it. It looks great and fires perfectly! Nicely done - and in a fraction of the time. I look forward to seeing that piece in person sometime. Cheers!
I look forward to your next visit!
Beautiful rifle. Peters smile after the first shot says it all.
Yup!
A thing of beauty. The curly maple is outstanding. Still smiling? Do t think that’s coming off anytime soon. Kid in a candy store. My grandpa would
Have loved it. And he would have taken me shooting with him. Now for a name. Jenny is going to be so jealous.
Jenny is a wee bit jealous, lol. Any suggestions?
@@TheWoodlandEscape Sally.
Jim makes great stuff
Thanks!
Indeed.
Beautiful ! That rifle looks like it will certainly live up to it's name....a true " Woodsrunner " !
I very pleased, indeed!
Wow, what a great kit. You are going to force me to break open my "emergency" piggy bank my friend, lol. It will be well worth it, that's for sure. Your build came out fantastic, the orange had me scared for a second but the final color is perfect. It's funny how I am getting up there in years and have always been a firearms guy, yet it's only recently that I've been drawn to black powder, cap & ball, flintlock, etc.. Ahhhhh, what was I thinking all of those years?? Lol. Thanks for the video. 👍
There in lies the rub , as I firmly believe that once you’ve smelt that first black powder smoke you’re hooked. The Government should have to label it highly addictive, lol!
That's what I call a practical work of art.
I thank you, sir!
Having built several flintlocks from scratch over the years, I can apreciate the lack of labor to put this outstanding rifle together. Outstanding. 54 cal. Is my go-to cal. Also. The only thing that I can see wrong would be the rear sight might be on backwards. Nice job. Ron from vermont
I’ll be explaining that shift orientation in my next video.
I love mine too. I had a friend from N.C finish it for me. Fits like it was made just for me too. Hope to see you in the states sometime Peter.
hi joe from nc friend
I’ll be attending a number of events next year . Thanks for your interest
I’m sick right now, this came up in my recommended, i was not disappointed!
Glad you found us.
Nice gun. A .54 caliber Kibler Woodsrunner was my first flintlock. I ordered a second (a .58 caliber smoothbore Kibler Colonial American) after two weeks of waiting for the first gun. I have zero mechanical inclination so the guns were just about right for my skill set. Great job putting it together and thank you for creating and sharing such fine content.
Thanks for your business!
@@kiblerjim Thank you, Sir for creating such a fine product. I owe you a debt - I can now use a file.
It's a work of art. Love the finish. Fine job.
Thank you very much!
Built mine this spring. My third Kibler and fifth flintlock. Love them.
Thanks for the business
You sure are a lucky man.
The grin on your face the entire time is so telling. You’re having the time of your life and it comes through on screen. Thanks for the video.
Thank you,heck, enjoying life is a whole lot better than the alternative!
That was a proud smile. Its beautiful.
I've been thinking about buying one of Jim's kits for a while and your video just convinced me. I like the stain you used as well. Love watching you.
We would be happy to help you out
Go for it … a great project!
Beautiful!. Watching your videos somehow brings me back to when we were kids and used to play "Indians & Cowboys" doing our best to dress as such. I was always an Indian and built my first usable bow & arrows when I was 9 years old. The love for archery perdured to date in me. Not very different from what you do. Keep being a full-grown kid, Peter! Thanks for sharing.
No plans to change, lol. I also build primitive bows and love archery .
Good morning from Syracuse NY USA brother and everyone else thank you for sharing your adventures in history videos
Our pleasure, Earl.
Thank you my friend
Great Video and Review , I don’t know the last time I saw someone smile that much in a video ! I can see that you are genuinely enjoying yourself with the Kit and that it’s of great Quality . You have a Beautiful place to work there , thanks for Posting this , be getting myself one as soon as funds allow . Thanks again 👍👍
Thank you so much! You’ll not regret purchasing a Kibler , that’s for sure and for certain.
These are absolutely fantastic! I started by building 2 Kibler’s to have a feel of what are the proper dimensions of a flintlock. Practice some carving, making a few extra parts from scratch for the Southern mountain rifle (patch box and nose cap). It allowed me to build some skills to start building some from scratch.
Thanks for the business
A great way to start scratch building skill set.
Howdy Peter, bravo well done indeed! You made quick work of that build. Congratulations, on the Kibler woodsrunner.
Thank you! Cheers!
I am drooling over these rifles. I hope to order one next fall.
You’ll not be disappointed.
@@TheWoodlandEscape Just happened to find your channel. I will be checking out more of your videos this winter when I have more free time up here in Alaska. Thank you for taking the time to reply.
Glad you found us and we appreciate your interest and support.
That’s an awesome looking gun! Thanks for sharing the experience of building it!
My pleasure.
Wow. The smiles, the grins, the overall positive energy is absolutely inspirational. Keep it up!!!
Thank you so much!!
I purchased the same kit, but currently finishing a Gemmer Hawkins Kit. As soon as I'm done with that one I promptly will begin the Woodrunners. I know I will enjoy building it and firing it next.
You’ll find it ridiculously easy.
That smile at the end when he shot was great! Made me laugh! What a great video. I’m bought my first long gun kit and made a squirrel gun and fell in love with it. Hoping to build a Fowler or a larger caliber for bears/deer. Great video!
Be careful, once you have a second flintlock , it becomes a full blown addiction. Thanks for your interest.
This is some Beautiful Workman ship . Thank you for Videoing this for us .
Glad you enjoyed it
I know nothing about guns and I do not hunt, but I enjoyed this video and your enthusiasm for the project.
Thank you.
Another awesome job. Thanks for what you do.
Glad you enjoy it and we appreciate your interest.
What a beautiful gun great work on the fit and assembly
Thanks, Mark.
I have a Tuĺl 65 cal.I made three at in a winter. Sold two of them, kept one for me.
When I load it, I use 610 ball,ten thousand patch, 62 gr. , 4f powder,. I put the sprue down then tamp might down. I have been in a lot of woods walks and alot of novelty shoots . I was never beat. Oh yes, my tiger is setup with no creep. No one else can use it and beat me. My barrel is .62 all the way from breech to mussel, so with a barrel, at .62, ball at .610, patch at .010. IT leaves me at .630 thousands.
I was real impressed with your kit. Sure did save time. I haven't shot my Tull in over 10 years went through a bad Devorce. Now I have Sugar. Had my right, foot taken off be low my knee. Just been through too much. Just lost interest in just about everything.
I did the Mountin Man for 20 years. I KNOW I got off track. Sorry!! But all in all I like your kit. My camp name is Tuminkz that is( Twominks). Loved your show
Keep it up
Sorry to hear of your health issues, Dane but, it sounds like you have some very fond memories. Appreciate you4 interest.
Awesome video Peter, and beautiful rifle 😊
Pretty pleased with the end result.
My friend! I just stumbled across your channel and I subscribed so fast. This was the most relaxing 28 minutes and 35 seconds I’ve felt in a long while. As a historian and lover of the outdoors, seeing all your craftsmanship and enjoyment meant the world to me 😩 I got into black powder recently with my 1877 Springfield trapdoor, just got my first cap and ball revolver too… next step is my own flintlock. Cheers from Croatia!
I am happy you’ve found us and appreciate your interest. Be careful with getting that first flintlock, they’re very addictive.
such a great video! this made my day!
Glad you enjoyed it!
Congratulations on a fine job! That rifle looks incredible and I think your skills and lifestyle will do that Kibler the justice it deserves! God bless!
It is a pleasure to carry and turned out a pretty tight shooter to boot!
Great video! You answered a lot of my questions and hesitations regarding Kibler's kits. I think I might consider another gun now. I've never built from a kit, but your video really showed the ease of Kibler's CNC work.
We would be thrilled to help you out with a kit!
You won’t be disappointed!
Peter, I love this channel! With all the chaos in the world these days, your channel brings me peace. Thank you.
It is indeed a crazy angry world. I like my solitude from it all. Appreciate your interest in our endeavours.
Brings me back to being a kid in my dad’s gunsmith shop. My first build was when i was 13 a .45 cal Kentucky rifle built off of a Traditions kit. Wished it would’ve gone together that easy.
Great job and great video Peter. I try to build one or two guns a year and I'm just starting a 1770s Virginia from a blank, but i too had to try one of Jim's kits. I went with the southern mountain rifle and hand forged a few of the parts for it. There are a couple of videos of it on my channel. I was highly pleased with the quality of the kit and I recommend Kibler kits to anyone just getting started.
Thanks again for the great video.
TC
Thanks for your support!
Thank you, I’ll have to look up your channel… thanks for sharing.
Hi, Turkey Creek, I just subscribed to your channel after reading your post here. Some really fine folks that Peter is gathering around his fire. Blessings, Christiaan from South Africa.
Thanks Christiaan! I look forward to hearing more from you in the future!
I absolutely love Peter's channel and have watched many of his videos multiple times. This is a great community that we are part of.
TC
Big fan!
Wow u made my day...officially my favorite channel on youtube...you have my admiration
Wow, thanks
I just bought the kit on your recommendation. Thanks
Frank
Thanks!
Hope you enjoy it as much as I did… a great project.
I love mine
Building my kit was one of the most rewarding experiences I have ever had in this hobby. Great overview!!!
Hey Alex, I totally agree. I trust all is well with you.
That's a lovely rifle. Those CNC lathes are almost witchcraft, they work so fast and accurately.
Love your videos.... instructive and entertaining. I am a gunsmith myself (in New Zealand), and my favourite work pieces are the old ones. It's great to get them working properly again. Nothing puts a smile on your face more than a flintlock that works properly.
You are right about the work to inlet a stock by hand. It takes a long time. I have an old Hollis S/S shotgun (external hammers) that I use for Western BP shooting (I have lots of solid head brass cases), and a month or so ago I fired two rounds and could not open the gun. The stock had failed where it joins the action, and on getting it apart I found that the stock has been repaired two or thee times before, and the wood was saturated with oil from 100 years of over lubricating., The old girl is at least 100 years old (Damascus barrels), and I didn't have a large enough piece of timber to make a complete new butt stock.
What to do? As the gun could not be original any more I decided to splice in a new front half of the buttstock, which involves inletting the action body, two locks, trigger mechanism etc. I have scarf jointed the stock through the grip area, so a bit of cunning staining will be needed to match the wood colour to the original. I have one more lock to do and I can start finishing it. Thank goodness for epoxy glues, although the scarf joint is also pinned. It looks promising, and so far I have spent upwards of 20 hours chiselling away, although I did waste 4 hours of so on the first bit of wood as it had an internal fault that I did not see, so had to start again.
Double guns don't leave a lot of timber after inletting... I did an old percussion Westley Richards a decade or two ago and the stock on that had been entirely eaten by borer beetles. The bores were perfect though, so it was worth the effort and it shot really well, I never should have sold it.
Yes, flinters work upside down.Mine always have.
Keep up the good work 🙂
You are right about the damage oil does to the head of the stock! I find a lot of rifles coming back from India suffer from this, I think they are over oiled, and stored butt down, the oil runs out of the action and soaks into the head, I have several Falling Block rifles like that, the worst one is a 577 Westley Richards that came back(to UK), from India, always a problem with a heavy recoiling rifle to know what best to do, stay safe! Chris B.
Wow, love to share a fire with you… very informative feedback, thank you.
Peter she,s a beauty good luck this season.
Thanks, Larry
You are quickly becoming my favorite UA-cam creator! Awesome video.
Wow, thanks , I’m humbled.
You built a beautiful gun, Peter. It was a real treat to watch. Thank you.
Thank you.
Boy what a piece of art. You've convinced me....Now I need to go spend some money lol.
You won’t be disappointed.
Excellent video! Met you at Longhunter School. I own 3 Kiblers. Several corrections on your build . The nose cap screws should have entered from the barrel side. too late to change that, however. Both the rear sight and front sight should be turned around. My Colonial kit is nicely figured plain maple also.
It is a an experiment to help my 70 year old eyes make iron sights work.
I was surprised and impressed how well everything fitted without a lot of work, a lovely looking rifle that will only get better with honest use....nice one Peter.
Thanks--we work hard to make everything fit together
Oh, it’ll get used!
I hope to have one of those this spring. I hope will show more of this rifle.
You’ll not be disappointed with Kiblers products.
This video is exceptionally good! I was smiling from start to finish. Thank you very much.
Glad you enjoyed it!
Taylor Sapergia of Pr. George BC taught me how to shoot. He makes the best guns I've ever seen, and he built me a .54 Hawken full stock. I started with 90 gr of 2F and primed with 4F in the pan. The gun shoots better than I do. Yours is one sweet gun. It's amazing how accurate that CNC gear can be in making stocks. What a fit! But geez Peter, git yerself a sprue cutting mold, .535, and you can hunt anything on the continent with it. Except for grizz. maybe not him, but most everything else. Work up a load with care, buy a ream of patch material and ignore the looks in the fabric store as you walk around calipering cotton swatches to get the right spec. Keep an eye out for flints in the creek. Keep yer powder dry! And make meat with that thing, what a sweet looking gun.
Taylor participated regularly on the ALR forum, along with his brother, and are always full of wisdom and glad to help people.
Taylor is great
That is the plan, the meat part, lol. I don’t build them to look at.
I used to get together with other guys and just have a bullet casting session. It doesn't take long to cast a hundred round balls, sit around and chew the fat. Another handy item is a loading block for when you're hunting which holds a couple of patched round balls, lubed up and ready to punch into the bore. So much of the black powder gear can be made by the shooter himself, that it really makes it a charming sport. I also make arrows out of ashwood, which may be harder to do since the emerald ash borer made its way here. No idle time!@@TheWoodlandEscape
Peter thanks for another great video.
Glad you enjoyed it
Damn… That’s a beautiful piece!
Thank you, sir.
Wow! Talk about a high quality lock! An amazing rifle.
It certainly is well made and the fastest I’ve seen yet!
Excellent company!
Thanks!
Thanks for showing this Peter. I have been thinking of buying one of these. I think one is in my future now. Great video
I think you should get one for sure!
Go for it!
What a fine looking instrument.That smile of yours from ear to ear really tells the story.What a great life choice I envy you.
It is a rifle to be proud to carry and a tight shooter to boot!
I just bought myself a Jim Kibler woodsrunner because of your video. I do Rev war battle reenactments as a dragoon with other dragoons. We travel across the North and Southeast recreating history. Love watching your videos recreating the 18th century.
You’ll not be disappointed with your pick of kits. Thanks for your interest in our endeavour.
I was always wanting one of them. Kibbler 45 swamp barrel rifle's. I broke my back in the oil filled and it put my dreams to rest. Now I'm on a fixed income and couldn't even afford. I scraped out raffle. It's always nice to set and look at the videos about. These beautiful rifles Thanks for sharing your video.
That is sad about your accident… in a heart beat how our lives can change.
Magnifique ! Bravo mon Ami ! May it bring you what you need to survive ! Cheers
I’m sure it will do the job.
That is one I'd really like to add. It sure seems all of the "challenges" of building a longrifle have been eliminated!
You can do it the old fashion way and I have no intention to give up scratch builds.
Clicks together beautifully ! Wish I could get me one right now! It’ll have to wait for a while I’m afraid. Beautifully finished too.
It did indeed and should you get one I can assure you, you’ll not be disappointed.
James Klien is obviously an artist. Ge really understand color layering! What a beautiful finish! ❤
Thank you, I’m pretty pleased with how it turned out.
I've always wondered if those Kibler kits were a hard build now I know so I may have to take the plunge thanks for the tutorial.
We would be happy to help you with a kit--thanks!
@kiblerjim how much is the kit as shown in the video?
Glad I could help, you’ll not be disappointed.
I am eagerly awaiting his Fowler kit!
I for one won’t hesitate to purchase one.
That is absolutely beautiful. Incredible work.
Thank you very much!
I have a Kibler Suthern Mountain Rifle in .40 caliber that I built about 2 years ago. Kibler products are outstanding.
Thanks!
Indeed, Jim’s kits are second to none!
I know you name dropped the wood stain, but you should really link that somewhere since it turned out so nice!
Good feedback, I’ll see what I can do.
Beautiful! Thank you for taking the time to do this video. Very enjoyable and informative. Well done.
Glad you enjoyed it!
She's a wee beauty Peter! 🐾🙏🏻✌🏻 Slàinte 🥃
I agree … I’m tickled pink!
Thank You for letting us come along . It's grand to see the joy of others having a good day . good luck on your hunt . Roy Boy , USA
Thanks Roy, we appreciate your interest.
What a precious kit! Thank you!
It really is!
Oh man! This is one of those facets of shooting I’ve been looking into. Only shot a flintlock once before, and loved it. Seeing that this is something that anyone with basic skills can do, and how this kit pretty much falls together, now I have another mania to pursue. Thank you for sharing this.
My pleasure, Darren and should you enter the world of flintlocks I should warn you, it can be very addictive.
6 year old with a new cap pistol at Christmas.
I can so relate … never got enough caps though!
Great job on the muzzle loader Peter, love the final look of it. Keep your powder dry. Both my older brothers are into this. As the story goes, both were drawn for mule deer in the great sand hills west of Swift. The oldest one shot a buck, as they were congratulating each other, the buck decides to vacate the area. So he hops up and takes off. Somehow the brother that shot the buck has a empty smoke pole and the other one didn't shoot. After about 3 or 4 miles of tracking him the older one (one one that killed it in the first place) gets another shot and down it goes. When they walked up to it, the other one hands him his rifle and said shoot him again. Take care
Hilarious, thanks for my afternoon laugh!
This has to be my favourite video to date!I'm absolutely blown away that you can buy such a well made gun and be up and running in a day. Here in the UK you can't imagine the red tape involved I even owning a non working decommissioned antique let alone a functional beauty like that. And as a lifelong woodworker/boat builder/ carver I can see why you went for that finish chap. That maple just came out so good! Andy from Yorkshire UK
It is such a pity to see gun control go beyond common sense… appreciate your interest.
I just recently bought a Jim Kibler Colonial American Longrifle, extra fancy maple (54-caliber) with the intention to do a little bit of inlays and carving.
But after getting the kit, and seeing how beautiful the figure of the wood I decided to leave it simple.
This rifle will be spending a lot of time in the woods of Virginia (deer and bear) hunting, and I know it's going to get a few dings and dents but I'll try to keep it to minimum.
The Finnished rifle is beautiful and I will be sighting it in for hunting loads next weekend.
I'm looking forward to my next Kibler rifle as soon as I can afford it.
(I almost forgot to mention that this is the first time I've build my own flintlock rifle or I should say assembled, as the amount of fitting was minimal, I spent more time on draw filing and browning the barrel and polishing brass.)
This is the first time I've seen your channel and I must say that I really enjoyed it.
Glad you found us and congratulations on your build… sounds like beauty!
Sometimes I put this on just to have it on... it's soothing!
Well now, that is just a fine com, I’m glad you’re enjoying.
Very cool show!! I find it a blessing to watch someone enjoying their state and creating tools to enjoy it even more! Keep up the history and great work!
Thanks! Will do!
Absolutely beautiful weapon! I have a CCR (Caywood Caywood & Roe) 12 gauge fowler that is also stunning Ive had for 16 years.Thanks for sharing.
I’ll bet your flinter is a beaut. I like the rifles for big game hunting but, must say I love my smoothbore.
Awesome video! I have a percussion Kentucky long rifle, and have been wanting a flintlock for some time. I believe this video pushed me over the edge!! I will be purchasing one! I just found your channel, and I love your place! New subscriber here!
We appreciate the interest and support. Be very careful getting that first flintlock, they can be very addictive, lol.
When you lit that thing off, it put a big grin on my face too! What a beautiful rifle! I am sure you will take some game with it, again and again. I have cast many bullets, and pre heating the mold is always important.
Working on it as a type, I’m actually off to Manitoulin Island for our second month of the year.
A fact and truth brother about making musket balls
Nicely done. A flintlock kit is on my bucket list to build and pass on to my grandsons.
You’ll not be disappointed with the Kibler line of kits. It certainly could become a family heirloom.
She's an absolute beaut Peter! I hunt with my trusty 40 year old TC Hawken .50 cal, but I've been looking into one of these builds for a while.
How much do they go for ? I have always wanted one
@@jameswilson322 I think they are a little over a grand now
@@Simon-talks where would a guy order one ?
We put a link to Jim’s company below our episode.