@@pyrosbargrill9675 Yeah good luck with getting an answer bud I asked this question 9 months ago. I ended up just buying a different radio/reciever. FlySky GT5. $80 for radio and one receiver. Not only is it cheaper than Traxxas TQI initially. Additional receivers are half the cost and it has more channels and more options. Comes with adjustable gyro that you can adjust steering and throttle independently of each other on the gyro along with adjustable ABS braking. And all the other normal endpoint adjustments and dual rate features. Can be run off of 4 double a or 2S LiPo battery also.
Hey traxxas support I just did it for my slash 4x4 and the light when green for a second and then started to blink red. When I go to drive the slash it is fine for about 5-7 min but them the radio stars blinking red and I then have no control over the car I don't know what's going on
vxlspace I actually found out it was because of the battery, it was a bad battery and whenever the esc went to pull power when full throttle it would overload it and trip a cut off, once I got a new battery my problem went away
I’ll ask even though it seems no one is getting any answers, I read that with the Bluetooth module installed, it’s able to correspond with 30 different cars. So if I have a Revo and a Jato, add the Bluetooth module, will I need an additional radio? Or just two receivers? And always leave one off while driving the other? Anyone? Anyone?
I have done what the video says for my XMaxx 8s, but now the car is messed up even more than before. I was messing with the Multi-function knob, and messed some programing up. So i did the factory reset on the controller, and now both throttle and steering rarely respond. Help.
You might try calibrating the ESC: ua-cam.com/video/u1jYwPzQ8i8/v-deo.html Refer to the manual to ensure the proper transmitter reset sequence for the X-Maxx (bottom of page 33): traxxas.com/sites/default/files/77086-4-OM-EN-R00.pdf If the problem persists please contact us at 1-888-TRAXXAS (Outside US: 972-549-3000) or e-mail support@traxxas.com for additional support
How can I reset the receiver for the scy16103pro car, please? When I turn on the remote, it lights up in red instead of flashing, and it does not connect to the car.
How do set it for Traxxas 1/10 may wires seem to be crossed inside I have to yellow with white if not my forward would pull back and to go backwards I push forward .. help
sweet looks like it works for the traxxas slash 1/16 upgrading to a TQi radio and TQi TSM receiver for much greater distance, multi function an 70/30 forward/reverse output
I haven't used my TQ1 radio with my Rustler XVL for over a year. I cannot get it into Sport Mode. I set it there, but the speed is half-speed, the same as it is when I select option 3--three blinks. How can I get it back to full speed (sport mode option 1?)
Press and hold power ez start bottom them start solid red light and then blink once release the bottom. That's sport mode. You can do it with controller off also. Good luck .
I was having problems with my Maxx not responding after a few minutes of use. Charger the battery and now my transmitter is not turning on (no green light) and I’ve already replaced the batteries. Obviously the car now isn’t responding at all. Help?
I have the 4 channel TQi TSM OBA ... I'm having issues...soon as I apply ANY throttle it causes the servo to turn right and doesn't recenter ...in reverse it works properly... I've chosen to use your products in my one of a kind RC but it's causing me some serious headaches!!!! Please help me out 🙏🙏
Hi, I’ve got a TQI radio on bandit vxl and after about 8 months i opened and when I run the required 2 updates with android pie - never comblete - never verify and now not working ,it’s impossible to turn it on. I try to change the battery from nimh to lipo , reset but nothing happened. What can I do ? green is blinking !!!!!!!!!!!!! how to reset the update or restore or safe mode ?????
i have tried this 3 times for my TRX-4 with no luck. The TRX 4 is Not listed in this video so i used the Summit wethod as it was the closest design with 4 servos and the same 4 channel remote. please help thanks.
My 4-Channel transmitter will not turn on, new batteries placed correctly, and it just doesn’t turn on, no LED and doesn’t connect. Help! I contacted support and they said to send it out to their facility in Texas.
Traxxas please!! When entering the menu of adjustment of the radio it just died, out of nowhere ... channel 1 and channel 2 completely inoperative ... channels 3,4e5 work ... what can be done ???? I've tried everything, reset the radio through the buttons and even added a bluetooth module to try to solve and nothing happens .. what can you do to help me? I've tried all the possible options contained in your manuals ... **traxxas 6530 (trx-4)
olá amigos. O suporte da traxxas (suporte do site, porque esse aqui é um fiasco!!) me atendeu de forma muito rápida, ainda no mesmo dia. me passaram as seguintes instruções e resolveu o problema. segue o procedimento para o rádio do modelo trx-4: Next reset your transmitter to its factory default settings. This procedure is different from the one in your Owner's Manual. Start with radio turned off. Hold both menu and set. Turn radio on Release menu and set slow red blinking light Hold menu and set till light changes to green blink Release menu and set While holding steering at full left, press set. While holding steering at full right, press set. Light changes back to red blink While holding full throttle press set. While holding full breaks, press set. Light should now be solid green, factory endpoints reset has been finished.
ok....how about a solution for when I set up my Steering End Points and it doesn't work. I hate this digital BS. I think I'll buy a different receiver and transmitter.
Can a transmitter with a multi protocol module work with a Traxxas receiver? If so what protocol is Traxxas using? Thank you for your time and effort. 🤜🏻💥🤛🏻✌🏻
Does anyone know why my Traxxas Rustlers front wheels jump slightly to the right when i let go of the controls on the remote. How do i correct this problem. The car continues to drift to the right as i accelerate, even after i adjust the steering trim.
This sounds like the TSM on your car is turned up to high. Try turning TSM down some and see if that helps. TSM stands for ‘Traxxas Stability Management’. This function will detect movement in your vehicle and will help stabilize the vehicle during fast straightaways, acceleration, turns, and during braking. More can be learned about TSM here: traxxas.com/products/parts/traxxas-stability-management Please contact Traxxas Support and we will be happy to help! U.S. - 1-888-TRAXXAS Outside U.S. - 972-549-3000 E-mail - support@traxxas.com
Hi I got a tqi version but after fw upgrade become dead.. I rewired so now It does work like a TQ :D only problem is I dont know how can I setup FailSafe. any idea?thanks
I know this is a old comment that I am posting on however I was wondering did you receive any responses to fix this problem I would greatly appreciate any pointers you could help me with as mine is doing the same thing thank you very much
Hi , I install the OBS on my funny car but the ESC does not work its blinking and a sound , the steering work but no forward or reverse , if I unplug the OBS everything works fine , please help it is really cool with the sound :-) Thank you
TRX-4 RESET. PAGE-31. traxxas.com/sites/default/files/82056-4-OM-EN-R02.pdf. 1. Turn the transmitter off. 2. Hold both MENU and SET. 3. Turn the transmitter on. 4. Release MENU and SET. The transmitter LED will blink red. 5. Press MENU 6 times. The transmitter LED will blink red 7 times repeatedly. 6. Press SET to clear settings. The LED will turn solid green and the transmitter is restored to default.
Give this a try: Start with everything turned on (Transmitter and vehicle). Hold menu for 3 seconds and then let go. Press menu once, then set 7 times. You should have 8 red blinks that repeat. Press set one time. The light will blink green rapidly followed by blinking red again. Hold menu for 3 seconds. The multi function knob is now set to TSM adjustment. Set it to about the “9 o’clock’’ position to start with and adjust as needed. Going further right than “12 o’clock” will probably result in high speed steering wobble because it’s set too high. Or call us at 1-888-TRAXXAS or email support@traxxas.com and we will be happy to assist you!
If you have the TRX-4 Sport it would come with the TQ transmitter, which only uses one button. This transmitter wouldn't need a full reset but if you need to reverse steering or throttle, check out the manual for the TQ: traxxas.com/sites/default/files/KC2641-R03_6516,%206517,%203047%20LCTQ%20Transmitter-Owners_EN-FR.pdf
For trx4 for all the people haveing trouble it’s profiles 7 press the button 6 times
Thanks so much
Fucking legend bro
Thank you!!!
Thank you
Wich button? Set or menu?
I'm glad this channel exists.
What about for the rustler 4x4 vxl?
What about 4 tec 2.0
What profile should be selected for the 1/10 Traxxas Maxx 4s ??
I would also like to know this
@@pyrosbargrill9675 Yeah good luck with getting an answer bud I asked this question 9 months ago. I ended up just buying a different radio/reciever. FlySky GT5. $80 for radio and one receiver. Not only is it cheaper than Traxxas TQI initially. Additional receivers are half the cost and it has more channels and more options. Comes with adjustable gyro that you can adjust steering and throttle independently of each other on the gyro along with adjustable ABS braking. And all the other normal endpoint adjustments and dual rate features. Can be run off of 4 double a or 2S LiPo battery also.
What about trx 4
Morgan Dougherty i am curios too!!😑😂😂
Morgan Dougherty what about tx4
Mode 6 according to the manual. 👍
what is "MODE 6" ?
Trx 4 is profile 7
What about 4 Tec 2.0 vxl ??? What profile select?
Which profile for Rustler 4x4 VXL? It is not shown in the video.
What about the 4tec 2.0
Not sure but I’m having the same problem
It’s the 2nd one
what about the UDR?
Are my eyes so bad that I missed the instructions for a TRX4 or was thereno TRX4 on any of the lists of models?
What about the TRX4 models?
Hey traxxas support I just did it for my slash 4x4 and the light when green for a second and then started to blink red. When I go to drive the slash it is fine for about 5-7 min but them the radio stars blinking red and I then have no control over the car I don't know what's going on
Same but with the xmaxx Scarry when it was going full speed at me
vxlspace I actually found out it was because of the battery, it was a bad battery and whenever the esc went to pull power when full throttle it would overload it and trip a cut off, once I got a new battery my problem went away
What about just the standard TQ 1 set button remote???
@traxxas support thanks, tho I have problem with my brand new trx4 bronco, tried profile 7 and now hill hold works but I dont have cruse control!
witch profile is it for the TRX-4 common man every car but mine a lotta help thanks
Have a GT40 4-TEC 4.0 with this problem and the newer models are not listed. Time to update this from 2017. Thanks...
What does this reset do for the nitro jato? Prevent speed wobble ? Reset servo ? Steering servo?
for the rustler vxl 4x4?
I’ll ask even though it seems no one is getting any answers, I read that with the Bluetooth module installed, it’s able to correspond with 30 different cars. So if I have a Revo and a Jato, add the Bluetooth module, will I need an additional radio? Or just two receivers? And always leave one off while driving the other? Anyone? Anyone?
I have done what the video says for my XMaxx 8s, but now the car is messed up even more than before. I was messing with the Multi-function knob, and messed some programing up. So i did the factory reset on the controller, and now both throttle and steering rarely respond. Help.
You might try calibrating the ESC:
ua-cam.com/video/u1jYwPzQ8i8/v-deo.html
Refer to the manual to ensure the proper transmitter reset sequence for the X-Maxx (bottom of page 33):
traxxas.com/sites/default/files/77086-4-OM-EN-R00.pdf
If the problem persists please contact us at 1-888-TRAXXAS (Outside US: 972-549-3000) or e-mail support@traxxas.com for additional support
How can I reset the receiver for the scy16103pro car, please? When I turn on the remote, it lights up in red instead of flashing, and it does not connect to the car.
How to do it for the newer models like the hoss, maxx , udr, e revo 2.0 ??
I didn’t see the Sledge on there. What profile do I set it to?
What option would the MAXX be?
This video is bs
What about that new maxx?
Yeah, so much for RTR.. just bought the Maxx and the transmitter won’t connect. Joy!
Followed steps exactly and it did not fix the reversed throttle problem, any help? ( I have a Traxxas X Maxx , Snap On edition )
How do set it for Traxxas 1/10 may wires seem to be crossed inside I have to yellow with white if not my forward would pull back and to go backwards I push forward .. help
On what categorie would my traxxas trax 4 crawler fit in?
Did you find out what profile is TRX-4
sweet looks like it works for the traxxas slash 1/16
upgrading to a TQi radio and TQi TSM receiver for much greater distance, multi function an 70/30 forward/reverse output
so what channel would I set it too for my trx4
yes, how was not addressed here????
Will this work on Maxx also? I have a Xmaxx also but didn't see little Maxx on it.
i hv model tq 6516.can i use this step?can u guy teach steering endpoint and another setting thx u traxxas love u guy so much👊
I haven't used my TQ1 radio with my Rustler XVL for over a year. I cannot get it into Sport Mode. I set it there, but the speed is half-speed, the same as it is when I select option 3--three blinks. How can I get it back to full speed (sport mode option 1?)
Press and hold power ez start bottom them start solid red light and then blink once release the bottom. That's sport mode. You can do it with controller off also. Good luck .
Ay what channel is it for slash vxl
I was having problems with my Maxx not responding after a few minutes of use. Charger the battery and now my transmitter is not turning on (no green light) and I’ve already replaced the batteries. Obviously the car now isn’t responding at all. Help?
I have the 4 channel TQi TSM OBA ... I'm having issues...soon as I apply ANY throttle it causes the servo to turn right and doesn't recenter ...in reverse it works properly... I've chosen to use your products in my one of a kind RC but it's causing me some serious headaches!!!! Please help me out 🙏🙏
Sounds related to the TSM. Change your multifunction knob to TSM and then turn the knob to 0.
I didn't see anything about reversing forward and backwards controls on the TRX 4. Help
Hi, I’ve got a TQI radio on bandit vxl and after about 8 months i opened and when I run the required 2 updates with android pie - never comblete - never verify and now not working ,it’s impossible to turn it on. I try to change the battery from nimh to lipo , reset but nothing happened. What can I do ? green is blinking !!!!!!!!!!!!! how to reset the update or restore or safe mode ?????
How do i use the SET option on My transmitter for My slash 4x4 TSM?
bonjour peut on installer une TQI dans un rustler 4x4 brushed? et est ce que la fonction retournement marcherait?
What group would the udr be in?
i have tried this 3 times for my TRX-4 with no luck. The TRX 4 is Not listed in this video so i used the Summit wethod as it was the closest design with 4 servos and the same 4 channel remote. please help thanks.
It's profile 7 press menu 6 times and then press set
Is not profile 7 because that will mess up your steering
LJD .40 when i chose profile 7 i loose stearing . Hiw can inget it back?
@@ljd.4079 didn't mess my steering
My 4-Channel transmitter will not turn on, new batteries placed correctly, and it just doesn’t turn on, no LED and doesn’t connect. Help! I contacted support and they said to send it out to their facility in Texas.
I followed these steps but my transmitter went green then straight to flashing red
Change the batteries
kevin10870 Thanks, that did it! #KeepItSimple
I Changed the Batteries and it still didn't work
for trx 4 ??
Traxxas please!! When entering the menu of adjustment of the radio it just died, out of nowhere ... channel 1 and channel 2 completely inoperative ... channels 3,4e5 work ... what can be done ???? I've tried everything, reset the radio through the buttons and even added a bluetooth module to try to solve and nothing happens .. what can you do to help me? I've tried all the possible options contained in your manuals ... **traxxas 6530 (trx-4)
olá amigos. O suporte da traxxas (suporte do site, porque esse aqui é um fiasco!!) me atendeu de forma muito rápida, ainda no mesmo dia. me passaram as seguintes instruções e resolveu o problema. segue o procedimento para o rádio do modelo trx-4:
Next reset your transmitter to its factory default settings. This procedure is different from the one in your Owner's Manual.
Start with radio turned off.
Hold both menu and set.
Turn radio on
Release menu and set slow red blinking light
Hold menu and set till light changes to green blink
Release menu and set
While holding steering at full left, press set.
While holding steering at full right, press set.
Light changes back to red blink
While holding full throttle press set.
While holding full breaks, press set.
Light should now be solid green, factory endpoints reset has been finished.
ok....how about a solution for when I set up my Steering End Points and it doesn't work. I hate this digital BS. I think I'll buy a different receiver and transmitter.
FUTABA IS QUALITY
Can a transmitter with a multi protocol module work with a Traxxas receiver? If so what protocol is Traxxas using? Thank you for your time and effort.
🤜🏻💥🤛🏻✌🏻
The cruise control on my trx4 defender is gone even when pressing set button several times, please help
just got a traxxas summit and it didn't come with batteries what's the difference between when It got release from 2017
Witch one allows the tsm to work...my tsm stop working...if I reset it will that fix the problem?
Does it work with the tq version?
Hm. There's no response when I hold the "set" button for 3 seconds... Doesn't start rocking or anything ... Any advice?
Does anyone know why my Traxxas Rustlers front wheels jump slightly to the right when i let go of the controls on the remote. How do i correct this problem. The car continues to drift to the right as i accelerate, even after i adjust the steering trim.
This sounds like the TSM on your car is turned up to high. Try turning TSM down some and see if that helps.
TSM stands for ‘Traxxas Stability Management’. This function will detect movement in your vehicle and will help stabilize the vehicle during fast straightaways, acceleration, turns, and during braking. More can be learned about TSM here: traxxas.com/products/parts/traxxas-stability-management
Please contact Traxxas Support and we will be happy to help!
U.S. - 1-888-TRAXXAS
Outside U.S. - 972-549-3000
E-mail - support@traxxas.com
Hi I got a tqi version but after fw upgrade become dead.. I rewired so now It does work like a TQ :D only problem is I dont know how can I setup FailSafe. any idea?thanks
Jani Joldos mine too. The Bluetooth works but there's no green light.
What about rustler 4x4 vxl?
Could you make a video how to set up the reverse step by step
I know this is a old comment that I am posting on however I was wondering did you receive any responses to fix this problem I would greatly appreciate any pointers you could help me with as mine is doing the same thing thank you very much
If I have an E-Revo 2.0 VXL what profile I need to select?
Ever figure out which profile?
Some one messed with my controller can not get cruise to work on my trx4 f150 high trail
but what about my TRX4!? what's the profile for my 1971 K5 Blazer
What about slash nitro 2wd
Where would the Rustler 4x4 vxl be
Full Throttle With Daniel and Thaaj profile 1
why is my tqi blinking red, it won’t work with my traxxas x maxx, im confused ?
Please contact Traxxas Support and we will be happy to help!
U.S. - 1-888-TRAXXAS
Outside U.S. - 972-549-3000
E-mail - support@traxxas.com
Thank you. I have this studderimg problem with my stampede.
Hi , I install the OBS on my funny car but the ESC does not work its blinking and a sound , the steering work but no forward or reverse , if I unplug the OBS everything works fine , please help it is really cool with the sound :-) Thank you
Ecx fan Slash Hi Ecx ,it is On Board Sound it's on the Slash 2x4
Thank you
Ecx fan Slash the sound works and the steering, but the esc does not, it beeps and blinks
Ecx fan Slash ok ,I will try that ,thank you so much
anyone know what exactly the 2nd knob does when on menu 1 ( i have slayer pro 4x4
Which profile for maxx?
Profile 1
TRX-4 RESET.
PAGE-31. traxxas.com/sites/default/files/82056-4-OM-EN-R02.pdf.
1. Turn the transmitter off. 2. Hold both MENU and SET. 3. Turn the transmitter on. 4. Release MENU and SET.
The transmitter LED will
blink red.
5. Press MENU 6 times. The
transmitter LED will blink
red 7 times repeatedly.
6. Press SET to clear settings.
The LED will turn solid green and the transmitter is restored to default.
Thank you..
Which one is for my Hoss 4wd vxl
Seems to me like a great time to get rid of the Traxxas junk and go with a quality esc, receiver and radio like hobbywing and futaba
No TRX4? One of your most popular models, surely
Does anybody know what profile the Hoss would fall under?
Nothing seems to be working for my widemaxx . It just wont reverse and the green light on esc goes out when trying.
Sorry to hear that - please contact our support team at 888.TRAXXAS or via Live Chat on our website and they can get it taken care of.
I did the reset on my tqi and I can't get the TSM to work how I go about that one
Give this a try:
Start with everything turned on (Transmitter and vehicle). Hold menu for 3 seconds and then let go. Press menu once, then set 7 times. You should have 8 red blinks that repeat. Press set one time. The light will blink green rapidly followed by blinking red again. Hold menu for 3 seconds. The multi function knob is now set to TSM adjustment. Set it to about the “9 o’clock’’ position to start with and adjust as needed. Going further right than “12 o’clock” will probably result in high speed steering wobble because it’s set too high.
Or call us at 1-888-TRAXXAS or email support@traxxas.com and we will be happy to assist you!
i have a trx4 and i dont have the button next to the mulltifuction button. is it just my car, or am i just stupid?
If you have the TRX-4 Sport it would come with the TQ transmitter, which only uses one button. This transmitter wouldn't need a full reset but if you need to reverse steering or throttle, check out the manual for the TQ:
traxxas.com/sites/default/files/KC2641-R03_6516,%206517,%203047%20LCTQ%20Transmitter-Owners_EN-FR.pdf
After I do this it just goes back to blinking red, why is this happening
my xl-5 won’t calibration after the app did the update. i have a trx4
Mine started today with the red blinking on the remote I tired reseting it
Will this fix my slow tsm problem
Hello I didn't see how to reset the controller based on having the Traxxas Maxx V2, can anyone help?
How about the 4-Tec 2.0?
yea me too
What profile for trx4
@Alan Garcia Chavez I heard its profile 7
And for the Chevy Cheyenne 10?
What setting is for trx4???????
I did it exactly, but when i press the set button, i just can see the green light for half a second, then start blinking red. It doesnt conect.
What about the Traxxas Slash Oba?
How about the setting for trx4?
What about the udr
Like srsly what do I do now
Any luck?
How can I clear model memory and only use the tqi on the dts-1 system ???!!!!!!!!!
Be careful of software updates people, mine crashed during the install and is bricked now...
Did you ever fix it
@@lukmankarlia8058 nah I ended up having to junk it
What about non-TQ models?
Ok but I do that but instead of it turning green it flashes green really fast
Same
@@devonhesselbein9848 hey i got it fixed, my controller just needed new batteries
@@ANTEAZY I didn't try that lol
@@devonhesselbein9848 well hopefully it fixes your problem 👍
Oi just bought a rew reansmiter. it is a TQi. my reciver is alsop a TQi. i've tried and tried but they willNOT BIND.
my rustler doesn't have a menu button only a set button plz I need help
I'm going to allow your calling of me noob because tbh I am a noob lmao
Does anyone know what profile the trx4 is
Can we pls have a tq reset video traxxas?
It didn’t work for mine. The right and left does both… turns and goes forward
What about for the maxx ??
How do I do it for a 4x4
My transmitter light is not coming ON but the Bluetooth is connected to my phone. It is not working