Also, do customers send the design separated? I’m new so I’m trying to understand. How do you make it so perfect? How do you line it up? Does the machine have preset stops?
We are just a bunch of punks down here in South Carolina looking to make cheap Merch for our bands when they go on tour, you have really helped me out because we are about to inherit a four color spider
Finally a shop that actually looks like a real shop. I don't know how these youtube channels have absolute pristine shops that look like their first day of business. By the way. Have you ever tried One Stoke's Colormax White? Best white we ever used for cotton and poly. No bleed issues on 100% poly. Used it on nylon bags with the nylon catalyst and never had any issues...well other than forgetting to preshrink the nylon once in a blue moon.
Good video. Can you please tell me if I need to stroke/choke the white underbase (make smaller) or leave it the same size as other colors when doing these type halftone prints. Thanks
I have the same press which when bought had been taken apart. Because it was apart I decided to get some of the parts sandblasted and powder coated. My question is could you measure your press across the centre to the extremes of the pallet arms so I know how big an area I will need in the room I want to put it. Thanks
Spray tack is the worst, it gets on your floor, in your house air vent system (beware if you’re in a basement), on your press, and most of all in your LUNGS!!! I got rid of my spray tack 10+ years ago when our heater guy found it all stuck inside our brand new ventilation system!!! I use a Textac wipe on tack and before every job I spray my boards with water and rub off the lint from the previous job, flash my boards and they’re nice and tacky again. When needed (about once a week) I put fresh glue down. It’s cheaper, and safer! You REALLY don’t want that in your lungs! I’m not sure why they still sell that crap product when there’s better technology that’s been available for at least 10-15 years... there’s multiple brand of wipe on tack TexTac is one of them, it’s very powerful stuff so I cut I with 10% water. A gallon last last me almost a year for 40 dollars!
Thank you for your advice ,But I seldom use spray adhesive. I use Tex-Tac water soluble pallet adhesive , I have another video where I demonstrate this(Screen Printing Polyester Team Wear) video ,I agree spray adhesive makes a Mess!
Once saw a 12 color automatic silk screener using 55 gal drums of ink. 2 people running it. One putting the shirts on and the other taking them off into the dryer.
The print looks really good but You shouldn’t have to print flash print the colors specially if you have a solid white base underneath. I not sure what white your using but just about any white out there for cotton shirts should not give you an issue in light color garments
Right but he said those were polyester shirts. He only did a print flash print with the white to compensate for potential dye migration and a print flash print flash print with the yellow because "Race Fuels" didn't have an under base.
I offer the same service just visit my blog dynamicdezign.com/screenprinting/ and also visit my website dynamicdezign.com/ that helps you a lot and also feel free to contact me at wilson.dynamicdezign@gmail.com for any query
The way they do it in the printshop I work in they have already have measurements for left chest and front chest and they align it with the design that’s already on the film with tape and all you do is place it on top of it. Next is to burn the screen or expose it to the UV light for about 30 seconds when done you need to wash off the exposed emulsion . but when all that is done the press head has micro adjustments where you can align the frames with the plates measurements all you have to do this time is to test the cross points to make sure they are aligned!✨
Ive never screen printed, but i would like to learn, im puzzled how does he know how to align the colors as he goes to the nect color. Can he see through the screen somewhat to place the screen where it needs to be?
If anyone can help me how can you add different colors to the shirt like on one screen it's the background of the design but then you move to the next screen and the reigns changes and moves somewhere else on the design if that makes any sense
Great video but how did you know if every shirt was positions at the center of every board? If one shirt is off then the design would have shifted. Correct?
You can create the design on a photo editing or design program such as photoshop, then you have to go through the process of burning the screen with the printed image...I recommend watching videos on the process. The screen itself I've bought off Amazon.
The print is supper clean. But if you have a good under base you shouldn't be doing to many passes. It all starts in the art work. but still hats off to you sir
Hello .I use the neck line collar and the armpit seams and just eyeball it ,I put a little marker on the pallet to know where centre on the shirts for larger shirts I move the shirt a little off centre
I offer the same service just visit my blog dynamicdezign.com/screenprinting/ and also visit my website dynamicdezign.com/ that helps you a lot and also feel free to contact me at wilson.dynamicdezign@gmail.com for any query
Perfecta impresión...de gran maestro. Felicitaciones.
Turned out so nice wow. Great Video!
Great set up ROCK and RORY! 👌🏽 I just started mine today ✨
Great video, simple process and outcome.
Amazing techinque, felt like a student watchin a grand master. Beautiful print
Thank You
Also, do customers send the design separated? I’m new so I’m trying to understand. How do you make it so perfect? How do you line it up? Does the machine have preset stops?
Ever think of using the grey base for poly shirts? It works really well, and you wouldnt have to go around multiple times and saves ink.
Yes ,I didnt have any Poly block and it was small coverage ,thank you for your input
We are just a bunch of punks down here in South Carolina looking to make cheap Merch for our bands when they go on tour, you have really helped me out because we are about to inherit a four color spider
I wish you the best of luck.Just do it !
How is it going ?
It’s so easy to do. When you’re watching someone else do it lol. I’m gonna have a go, but more of a diy approach. Those emblems look amazing btw.
Thank you very much
so damn smooth!!! great video! I love the process step by step!
many years pushing a squeegee LOL
I’m getting one tomorrow. I hope I’m that smooth with it.
Finally a shop that actually looks like a real shop. I don't know how these youtube channels have absolute pristine shops that look like their first day of business. By the way. Have you ever tried One Stoke's Colormax White? Best white we ever used for cotton and poly. No bleed issues on 100% poly. Used it on nylon bags with the nylon catalyst and never had any issues...well other than forgetting to preshrink the nylon once in a blue moon.
WOW, very nice looking print on those shirts. What mesh screens did you use for this job.?
That came out absolutely beautiful
thank you
that came out great! nice video
nice set up brotha keep that wheel spinning
Excelente trabajo!!!
Man, that seems like a pressure for 110s, but the print looked great. Thumbs up.
Good video. Can you please tell me if I need to stroke/choke the white underbase (make smaller) or leave it the same size as other colors when doing these type halftone prints. Thanks
Can’t believe it came out so well.
J
like your shop keeping it real and showing anyone can do this.
been doing it about 40 years now
I have the same press which when bought had been taken apart. Because it was apart I decided to get some of the parts sandblasted and powder coated. My question is could you measure your press across the centre to the extremes of the pallet arms so I know how big an area I will need in the room I want to put it. Thanks
Spray tack is the worst, it gets on your floor, in your house air vent system (beware if you’re in a basement), on your press, and most of all in your LUNGS!!! I got rid of my spray tack 10+ years ago when our heater guy found it all stuck inside our brand new ventilation system!!! I use a Textac wipe on tack and before every job I spray my boards with water and rub off the lint from the previous job, flash my boards and they’re nice and tacky again. When needed (about once a week) I put fresh glue down. It’s cheaper, and safer! You REALLY don’t want that in your lungs! I’m not sure why they still sell that crap product when there’s better technology that’s been available for at least 10-15 years... there’s multiple brand of wipe on tack TexTac is one of them, it’s very powerful stuff so I cut I with 10% water. A gallon last last me almost a year for 40 dollars!
Thank you for your advice ,But I seldom use spray adhesive. I use Tex-Tac water soluble pallet adhesive , I have another video where I demonstrate this(Screen Printing Polyester Team Wear) video ,I agree spray adhesive makes a Mess!
What a badass old man. I want to be like this guy when I get old. Just awesome!
Hey bud ,I aint old ,just older than you !
Excelente estampado segrigráfico!!
Great printing 👍
I actually watched the whole video. Good Stuff!
thank you
Once saw a 12 color automatic silk screener using 55 gal drums of ink. 2 people running it. One putting the shirts on and the other taking them off into the dryer.
That looks good. I always wondered how you did multi colour.
I have a 4 color screen but one plate for the shirts only, nice one you have sir
Amazing Work👍
Wow! This is great.
The MAN!!!
Holy crap. OG killed it!
thanks
Killer videos,,,you got it down,,,Nice looking front logo
So the 4 prints are all different. That way each can transfer its own color?
Rock & roll kunu c beliau.. pada hal layan dang dut wakakajja
Mantap bang
Am really in love taking a UA-cam class, so helpfully
The print looks really good but You shouldn’t have to print flash print the colors specially if you have a solid white base underneath.
I not sure what white your using but just about any white out there for cotton shirts should not give you an issue in light color garments
Right but he said those were polyester shirts. He only did a print flash print with the white to compensate for potential dye migration and a print flash print flash print with the yellow because "Race Fuels" didn't have an under base.
Great video sir. Inspired me to start doing some similar videos.
How do you line them up? Is it the same print on each screen and it’s just taped off to only allow a specific area to have the ink pass through?
I offer the same service just visit my blog dynamicdezign.com/screenprinting/ and also visit my website dynamicdezign.com/ that helps you a lot and also feel free to contact me at wilson.dynamicdezign@gmail.com for any query
The way they do it in the printshop I work in they have already have measurements for left chest and front chest and they align it with the design that’s already on the film with tape and all you do is place it on top of it. Next is to burn the screen or expose it to the UV light for about 30 seconds when done you need to wash off the exposed emulsion . but when all that is done the press head has micro adjustments where you can align the frames with the plates measurements all you have to do this time is to test the cross points to make sure they are aligned!✨
That's some great printing. What kind of printing press are you using? It seems to make printing simpler.
thank you for your comment, Im using a 4 colour ,4 station ,Ben-Mar Press ,Made in Canada
It came out looking great!
thank you
How did you line the cut outs on the screen so the individual colors went in the correct spots?
I use Printers registration cross marks then I tape them out so they wont print on the shirt
Good jobs , bravooo
Nice!
Where did you get the logo?
Ive never screen printed, but i would like to learn, im puzzled how does he know how to align the colors as he goes to the nect color. Can he see through the screen somewhat to place the screen where it needs to be?
There's no need for drying time in between coats? I want to be able to make mine clean and crisp like that!
I use a flash dryer ,you can see it on my left hand side. I use it to lightly dry the wet print so I can reprint on top of the print
This man looks happy :)
But how do you do multiple colors ? The Vinyl cutout has to be different ?
que clase de tinta es que no paso pistola de calor?
Excellent! 👍🏾
Perfect 😍
If anyone can help me how can you add different colors to the shirt like on one screen it's the background of the design but then you move to the next screen and the reigns changes and moves somewhere else on the design if that makes any sense
Awesome old men
Beautiful efficient work
Thank you
what is the mess count on your screens?
Very interesting!
Sir i need help from you. which printer is best for transparent / trace paper printer - with dots (screen printer) cmyk print
Why not have a larger table . The print came out nice man.
I'm interested in getting things printed digitally
Awesome 👌
Enjoyed this video a lot, just wanted to know what specific heat thing do you use to dry the ink, get back to me when can thanks
get a flash dryer, they're like $140 on ebay. alternatively, you can spend about the same money on a heat press, and be able to do vinyl, too
Awesome! Keep making those videos. 👊🏼
thank you
Those shirts look kick-ass good!
thank you
can you share about the printing machine you use?
interested in the spider's
Good shit 👍🏾
We’re do you the blue shirt 👕 from
You are a craftsman. Excellent stuff. Not sure how you manage to line the bed and screen up so well but assume that is from your experience.
That's a difficult part hey
You started by spraying your bases what was that and how does it help?
It is a spray adhesive glue which sticks the shirt to the pallet board so it does'nt move while printing
You are Awesome.. 🇧🇩🇧🇩🇧🇩
Para imprimir una policromia en un fotografía, cómo salen las imágenes?
Nice work sir keep it up
Thank You
Very good.
Thanks.
👌
What did you spray the bas with before you laid the shirt?
It is a spray adhesive but if you use liquid pallet glue is way better and if keep your shop cleaner
@@Vega23 yah pallet tape and the glue is the way to go
Great video but how did you know if every shirt was positions at the center of every board? If one shirt is off then the design would have shifted. Correct?
I use an adhesive to hold the shirt in place and I line up shirt on pallet with the shoulders ,hope this helps ,thanks
@@riteonscreenstudio148 yes thank you.
Just a question, why don’t you use a flash dryer after you put the white on?
I do use a flash heater ,its on my left hand side
@@riteonscreenstudio148 oh I could barley see it!
You did not underbase the race fuel?
Very safe units to use.
Really nice job.. is that ink specifically for Poly shirts?
yes it is a Poly Plastisol.it cures at a lower temperature ,From FH& Sons Toronto
Which mesh are you using? Very cool printing
white 110, yellow 110,red 110 ,navy blue 160 mesh
Cool! Nice job.
Thanks
How much is it the machine and where should I find?
can someone tell me where can you get the image screen? do you need to use layout program like photoshop adobe ?
You can create the design on a photo editing or design program such as photoshop, then you have to go through the process of burning the screen with the printed image...I recommend watching videos on the process. The screen itself I've bought off Amazon.
Wow...Magnificent!!
Thank you
@@riteonscreenstudio148 Your email isn't working anymore? I left you a message but it didn't go through :/
Nevermind I messed up.
smart work
The print is supper clean. But if you have a good under base you shouldn't be doing to many passes. It all starts in the art work. but still hats off to you sir
Master
Thank you sir. How do you know where different sizes of T-shirts are to be put on pallet board for consistancy?
Hello .I use the neck line collar and the armpit seams and just eyeball it ,I put a little marker on the pallet to know where centre on the shirts for larger shirts I move the shirt a little off centre
Some pallets come already maked
Did you print white under RACE FUELS?
I offer the same service just visit my blog dynamicdezign.com/screenprinting/ and also visit my website dynamicdezign.com/ that helps you a lot and also feel free to contact me at wilson.dynamicdezign@gmail.com for any query
Great print
thank you
nice video
wherevcan i purchase the 4 color station u have
How many shirts can you pump out like this in an hour/day?
I can print about 40-50 an hour 4 colour prints .About 100 per hour 1 colour print .Print flash print about 75 per hour
I think you fudged up, you didn't heat treat that last color?
The shirt was finished being printed I pulled it off to send it down the conveyor dryer
What’s the name of the screen printing machine that you’re using
Its a Ben-Mar 4 colour 4 stationmade in canada
How to make design in computer n how to send ink in dye panal
what kind of screen print machine is this
Good job.sir, how much market price ?