Axles I used yonaka 36mm hubs with insane shaft axles. Can build your own set with Autozone axle but would be a kit the same price but a little more hassle and need the know how
Hey buddy! I like the way you did on your ek. My question is when you say automatic, it means you still tun automatic shifter right? My wife dont know how to drive manual transmission
Four door.... Hatch? How much work was in that? I hope you didnt trash the hatch and planted the sedan rear end on the now basically "coupe with sedan tails".
Any more clarification on the manual s auto engine... cl type s swap in the junkyard has the manual trans but I think it was swapped. Would kpro support a manual engine?
Im late but thanks lol. Far as the shifter, would you recommend the no cut one that bolts up in the exhuast tunnel and what to do when running a aftermarket k series shifter, i heard you have to reverse the shifter lines to make it work on the J tranny
Racekarrr Built do you need bigger wheels for this engine swap so it can decrease the chance of the oil pan cracking when you have the engine lower to close the hood?
Look up on UA-cam Gene kim Robert breaker Chuck missler Kent hovind Extra ua-cam.com/video/KjU8XlYD6zM/v-deo.html ua-cam.com/video/BOkmg1jrHZk/v-deo.html
RIP man. Such an inspiration. wish you were still here to enjoy the fruits of your labor.
What happen to him
@@looseparashoot died in a car wreck with the same hatchback on a Florida highway. I believe he lost control while speeding...
@@jermainrmartinez4689 yeah it was down here in South Florida. I think he was racing a mustang and things just went left..
Oh his gone my bad
Good thing I found your channel, this literally my dream car and set up. ‼️💯❤️
*_Finally found a good video with a J swap EK!_*
Someday I'll do this to mine as well 🔥
*J Swap VS. The World*
Rip a legend 🙏 😢 motivation
he pass away?
Oh shit… this is in Florida… I didnt realize who this was until I seen the 4 door… I remember seeing this in person, it was so sick
I didn't now
Great content man. I've been wondering about the axles nobody seems to talk about them 🔥🔥🔥
Axles I used yonaka 36mm hubs with insane shaft axles. Can build your own set with Autozone axle but would be a kit the same price but a little more hassle and need the know how
R.I.P MY BOY JEFF NERETTE
Love the videos bro been following on ig for awile now. Keep it up can’t wait to see content on the coupe definitely an inspiration to my build
Race in peace king
Rip to this car and the owner it was great while it lasted
What happen
He wrecked on a Florida highway… somebody said he was racing a mustang… not sure how true that is…
Rip this just popped up in my recommended and I had to click on it loved keeping up with this car
Rest in peace man..
The car?
@@luamendozarob8428the guy
Rip man, this thing was getting faster day by day
I'm more stunned by the 4 door hatchback than the j swap. I didn't even know that was a thing!
Same here, never heard of that.
It's a normal civic sedan with a hatch which has been cut up and welded to the back. Crazy ngl
RIP brother you were a goat
I like the 4door hatch look,and that engine has all kinds of good brands looks expensive lol.id like to see this thing running,I'll be watching.
Get my IG @racekarrr
Awesome video man! I plan on doing the swap into my 01 crv. Pretty much everything in the same
I’m pulling the engine from a 02 accord.
Great video I appreciate your Effort for the upload
Rip 🪦 was a good built
Pull your pants up dude! Nice motor!
Killed it 🔥
RIP 😢😓
Great build !!!! 🔥🔥🔥🔥
Say yes to a belt..it cures an addiction to crack anytime
Damn R.I.P homie
Are you using the civic axle & rotors on the j32??
You got like a parts list and details on how you did the swap or what u need exactly to do the swap
I saw what happened in Integra empire... Rest in peace man
hello which gearbox model should i use that fits with the V6?
He’s dead bro
I have a j35a4, from a 03 Honda Odyssey, how do I go about swapping it into my ek hatch
That intake manifold makes it look like a little Ls lol
hey bro where can I get the Holley intake manifold?
so the pan still sits pretty low even on high setting?. Rip man, this thing was getting faster day by day.
Where can I get the set up for the computer
With everything included how much roughly would everything cost?
5-6k
But u love selling crack 😂😂😂😂 now I know how to make my money for the j swap 😂😂😂😂
R.i.p bro
A 4 door hatch??? Sick.
Where did you get that engine harness?
Hey buddy! I like the way you did on your ek. My question is when you say automatic, it means you still tun automatic shifter right? My wife dont know how to drive manual transmission
I got a jswap 96 ek bt the reverse aint going into gear what xould i do or change to fix that lil problem
Is it the same process with the 03-05 3.0 from the honda accord??
I wanna j swap a civic i am already looking at. Motor but are there any recommendations for cars and motors ?
Where did you get the fill pot for the coolant
Tractuff.com
Thank you
On the eg subframes does it matter what kinds or any of those years you mentioned would work
can you use the stock ecu ? if so which ones work ?
Raquel Esquivel I believe base Tl ecu is what you want to use. Type s searches for more sensors.
Four door.... Hatch? How much work was in that? I hope you didnt trash the hatch and planted the sedan rear end on the now basically "coupe with sedan tails".
R.I.P
so the pan still sits pretty low even on high setting?
Rest In Peace 🙏🙏🙏🙏🙏
Can you do this with a j39 from the ridgeline?
Damn this things sick
Does …any j series engine do have drive by cable or wire ?
About to do the j30 swap in my eg coupe
Rip bro 😞
Where did you get your dress up bolt ?
Where you located i need some help for real no lies
Any more clarification on the manual s auto engine... cl type s swap in the junkyard has the manual trans but I think it was swapped. Would kpro support a manual engine?
Irvin Dorsey no idea. I’m using Aem v2
🙏🙏🙏🙏
nah like this is fucking sick
What happened?
What do you have to do under the hood far as fuel delivery since it is a returnless setup and my ek has fuel return (j32a3)?
JG39697 have to add a aftermarket fuel pressure regulator and add a return
Im late but thanks lol. Far as the shifter, would you recommend the no cut one that bolts up in the exhuast tunnel and what to do when running a aftermarket k series shifter, i heard you have to reverse the shifter lines to make it work on the J tranny
All depends on the tranny you’re using. Can use the tsx shifter or rsx shifter works also with corresponding cables.
WHATTTTT I HAD NO IDEA THERE WAS A 4 DOOR HATCH
There isn’t. It’s a sedan with the back half off a crashed hatchback
Rest In Peace.
What about a right hand drive ek3 can the engine fits...thinking about buying an engine swap from Tl
SKBHondaMan The Welder yes will work exactly the same
nice!
RIP big dog🥺😞
Does it have ground clearance
Is that all downstar hardware?
Damn thus what I want
do I have to use the same engine harness or can I use the one from the tl type s?
火影Skrt wireworx harness makes it plug and play but you can use a cls harness just have to have the correct ecu.
Racekarrr Built do you need bigger wheels for this engine swap so it can decrease the chance of the oil pan cracking when you have the engine lower to close the hood?
Rest In Peace
💪🏽💯
Can you use an automatic in these swaps. I know I know, I am just a lazy driver.
Yes you can I’m going a 94 hatchback EG now
🔥🔥🔥🔥🔥
Didn't he pass away?
Did you have to swap sub frame or can I use the stock sub frame in my 95 eg coupe?
Your stock subframe will work.
Think I could swap a j37 in a 95 Civic Ex Coupe?
You can do what ever you put your mind to
How different is this from an swapping one into a eg
Pretty similar minus having to change subframe
And did you change your fuel pump? I know my stock civic is only 30 psi.
Juaquin Silva yes I change the stick pump to a intank 525lph pump.
I need help with my v6 95 accord it’s got a c series motor what I need to j swap?
Unfortunately he was recently killed in a car accident so you'll never get an awnser to that question :(
Look up on UA-cam
Gene kim
Robert breaker
Chuck missler
Kent hovind
Extra
ua-cam.com/video/KjU8XlYD6zM/v-deo.html
ua-cam.com/video/BOkmg1jrHZk/v-deo.html
Can u do my swap
What throttle cable is that you're using?
He passed away about a year, year and a half ago.
what did you do for the fuel system?
Sadly he passed away and won’t be able to respond. :(
You have the link of the mounts engine?
German Hernandez yes I used hasport. Email me and I can get you set up. Jeffnerette@yahoo.com
How the holley intake?
Love it for clearance but loses some mid range power
What if you have a manual j32a2 motor what do you have to do to change it into automatic motor
Have to change crank and cam sensors
@@sofakingjdm just those two sensors i have to change?
Cuz i do have a WIREWORX harness to but my car is 97 acura integra rhd
🔥🔥
What Kainda throttle cable you use bro
Hugo Crespin Lokar universal 36” billet cable
RIP
RIP❤️
Bro what?
Im about to do the same
J SERIES ONLY
How much was the wireworkz harness
799.99
Thanks man
Rip🤦🏽♂️🤧
What ecu use?
Aem v2
Willing to sell?
For right price
What is your Instagram man I have some questions 😤
@racekarrr
I think he wrecked this car
U fix cars and u a plummer