@@KoolinwithKrauss ya I remember the nastiest weather day I ever had was on the room of this nursing home there walk in freezer was down and it was raining sideways and I'm huddled under this tarp I binge corded over the unit trying to burn in a new compressor. I don't think the little flap on my tool bag would have saved my tools from getting drenched that day, also made my boss replace my meter that got soaked and broken from the rain.
@@keldon_champion duuuuude 😳 now that wild!! Ya I’ve never had an instance like that, been fortunate up until this point. Maybe the worst one I had was similar but disconnect was dead, at 9pm middle of thunderstorm in central Florida, and it was for an older lady. Only took couple tools and stuffed in my pocket. But a compressor? That’s next level
I wish they had this bag when I was doing residential this would be the perfect little service stinger bag. Its got all the spots for the necessities and it looks pretty good. I can't even leave my truck without loading a full cart of tools and bags and rolls anymore
25 years in the trade rain happens trust me Working and a storm rolls up it happens Love the bag though bout to scoop me one up been using my veto since 2010 still holding up great considering
For sure man, I’ve worked in the rain, I’ve worked around it. But I’m at the point if it’s raining I’ll wait it out or just grab a couple tools and put in my pocket. I’m in central Florida I can’t truly “avoid” it lol. Dang you got yourself a damn good one there!!
@@KoolinwithKraussI’m wondering if it fits the 680 as well. Not pulling the trigger until I know for sure. Now that I know it won’t fit in the MB5B it makes me think it won’t fit in this smaller bag either
I’m observing it through the other side of the wall of course 🤦♂️ 😂 just kidding!! It has been switched since the video was posted though! Appreciate it
Terrible product and customer service My totally unused new but old stock VETO XL's main zipper fell apart when I opened it for the very first time. Subsequently, the bag was deemed unserviceable by the repair department. Veto's customer services showed NO interest, neither did their CEO, James Brooks after sending him two letters with photographs of the damage. The handling of this matter is totally unacceptable for a company who prides itself on quality and USA manufacture. Please beware when buying their products as you might end up being very disappointed.
Whoa really? I’ve had 2 warranty in 6 years on different bags that were handled pretty fast! Sorry that it hasn’t worked out for you, is there a number to contact them?
@@KoolinwithKrauss TWO letters to the CEO and various phone calls - ALL useless. Customer Care is non-existent. I am a dissatisfied client, so I can widely and badly review the company which will cost them customers.
It’s assaulting!! jk but Your absolutely right, union to the left from observer. It’s a valley forge flag (cheap one 🤦♂️) and the tags are on the back side here and the stitching is there also, no excuse your right tho!! Thanks
That's a nice bag! That compartment in the back is awesome. I didn't even realize it came with that. Can't wait for it to arrive!
Yeah definitely an awesome addition they did there!!
"I'm not taking my tools out in the rain"
That's cute that you have that choice lol
It’s quite adorable, Perks of running your own business
@@KoolinwithKrauss I'm a refrigeration tech so it doesn't matter when it broke you need to fix it right now weather be damned
@@keldon_champion that’s a whole nother monster, yall hold it down 🫡
@@KoolinwithKrauss ya I remember the nastiest weather day I ever had was on the room of this nursing home there walk in freezer was down and it was raining sideways and I'm huddled under this tarp I binge corded over the unit trying to burn in a new compressor. I don't think the little flap on my tool bag would have saved my tools from getting drenched that day, also made my boss replace my meter that got soaked and broken from the rain.
@@keldon_champion duuuuude 😳 now that wild!! Ya I’ve never had an instance like that, been fortunate up until this point. Maybe the worst one I had was similar but disconnect was dead, at 9pm middle of thunderstorm in central Florida, and it was for an older lady. Only took couple tools and stuffed in my pocket. But a compressor? That’s next level
Cool vid man! Always fun to see other techs set ups!
Same here! I enjoy it!! Appreciate it man
Thanks for the video Jake.
Veto is always keeping us wanting more. Where does it stop. 😂
More and more and more!! They understand the market 😂
I wish they had this bag when I was doing residential this would be the perfect little service stinger bag. Its got all the spots for the necessities and it looks pretty good. I can't even leave my truck without loading a full cart of tools and bags and rolls anymore
It is the perfect quick grab bag, I find myself grabbing this more often than any other bag now!
Looks like a great bag with room to get your hand inside. 🤣🇺🇸👍
😂 that’s what it’s all about!!
Can’t wait for my MB5B and SB-LD to come in! Ready to set them up
Oh solid choice!! Veto season!!
Just got mine in this week! MB5B and SB-LD!
@@DanielDraper-ki4hr I’ve been loving both bags so far. Sb-ld grab bag and the mb5b when I’m doing bigger jobs
Krauss and Veto coming in clutch!!
Yeee!! Let’s go 🫡
What Krauss things?
My fieldpiece sc680 wont really fit inside any of my veto bags other than my tech pac blackout
That thing is a tank, I believe the 680 mayyyy fit in there. But I don’t have one, Adrian at reliablehvacr I believe did a load out with it
25 years in the trade rain happens trust me
Working and a storm rolls up it happens
Love the bag though bout to scoop me one up been using my veto since 2010 still holding up great considering
For sure man, I’ve worked in the rain, I’ve worked around it. But I’m at the point if it’s raining I’ll wait it out or just grab a couple tools and put in my pocket. I’m in central Florida I can’t truly “avoid” it lol.
Dang you got yourself a damn good one there!!
Still trying to make my mind up about what I am going to get. I am starting to dig this bag. Great video Jake da 🐍.
Always something to grab onto brother B rye!! Lmk what you opt in and get
@@KoolinwithKrauss will do brother.
lol I can’t decide either.. the dp3 not really of fan of tbh.
I got three of these recently. I was like, what am i going to do with this? Now i know!
Bam!!
Good little vid & nice bag as well ... '' Warning , Veto bags are habit forming ''... Thx
If that ain’t the truth Eddy 😳 thanks man!!
Valve grinding compound on those stiff pliers, little in the joints, work them for 5-10 min, then clean it out with WD40.
Appreciate it!
Get rid of the front pocket, make the sides pockets less bulky, and add a Velcro/zipper flap over the front like the tp series 👍
I think a flap option would be fantastic going forward!!
My Fieldpiece is a touch over 11” tall. Fits in the backpacks, except ironically for the MB5B 😂😂
Do you have The 680? That is a tallllllo beast!! It maybe able to fit in the back 😂
@@KoolinwithKraussI’m wondering if it fits the 680 as well. Not pulling the trigger until I know for sure. Now that I know it won’t fit in the MB5B it makes me think it won’t fit in this smaller bag either
Been trying to get Vito bags where I am in Africa with no luck . Import fees cost what the bag does.
Ugh I could imagine. I know there’s some tricky ways ppl in the UK have get theirs
Went with the MCT blackout over the MB5B this year…. Also got an MP1X. Can’t wait to get all 3 and load them out… my wife’s gonna kill me
Solid choices!! Mct is definitely ole trusty, she’ll understand … I hope lol
How do you like the mct
I got a blue bag I like Bosch blue's my favorite color
Solid!! I get a bit ocd with it
It’s called offset locknut wrench tool I got you.👍🏼
My man coming thru in the clutch 💪 appreciate you bro!!
Good seeing you Hoss turn and Burn
Appreciate you stopping by brother!! Be safe 🫡
What does the tattoo say
Which one?
@@KoolinwithKrauss the one on your right forearm. It almost looks like Arabic writing but I don’t think it is.
@@amg863 it’s Hebrew! My wife and I got matching
Quick observation: the flag behind you is hanging improperly. The Union should be on the left when vertical.
I’m observing it through the other side of the wall of course 🤦♂️ 😂 just kidding!! It has been switched since the video was posted though! Appreciate it
Calling out a cloth for being hung up wrong is what’s wrong with society.
@@glockoma3360just a piece of cloth? Wow.
@@ericlopez7120 Idolizing it is the part that gets me. Respect to what it stands for but idolizing it is something else
@ThugMuffin10 I agree but calling it out and for what
Why are your tools so clean (new). Do you even work bruh?
I retired
The focusing and unfocusing of the camera is messing with my eyes
It’s the aperture! Sorry about that!
It’s all about the new bag good god.
Nicey Nice… Thanks for showing it off… even though you stink for getting it early 😂
Absolutely dude!! Wellll you know 🤷♂️ 😂
Veto knew he needed something to do, so they sent his first.
@@OnusBones 😂
Terrible product and customer service
My totally unused new but old stock VETO XL's main zipper fell apart when I opened it for the very first time. Subsequently, the bag was deemed unserviceable by the repair department.
Veto's customer services showed NO interest, neither did their CEO, James Brooks after sending him two letters with photographs of the damage.
The handling of this matter is totally unacceptable for a company who prides itself on quality and USA manufacture.
Please beware when buying their products as you might end up being very disappointed.
Whoa really? I’ve had 2 warranty in 6 years on different bags that were handled pretty fast! Sorry that it hasn’t worked out for you, is there a number to contact them?
@@KoolinwithKrauss TWO letters to the CEO and various phone calls - ALL useless. Customer Care is non-existent. I am a dissatisfied client, so I can widely and badly review the company which will cost them customers.
Your flag is backwards.
It’s assaulting!! jk but Your absolutely right, union to the left from observer. It’s a valley forge flag (cheap one 🤦♂️) and the tags are on the back side here and the stitching is there also, no excuse your right tho!! Thanks