ZOHD Dart 250G

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 97

  • @HomeDronen
    @HomeDronen 5 років тому +6

    Yep looks easy enough for me to build, and I love the way it fly's. I will definately look into this one...cheers!

  • @tiankuohua5167
    @tiankuohua5167 3 роки тому +3

    When I maidened my Dart 250g I was a bit surprised that the battery was at 11.6 volts when I stopped flying, and charged it up. On the second flight, I could not believe how long it flew. When on a 3s 1100MAH LiPo battery, I managed a solid 35 minutes of fast flying action.

  • @PilotPete-662
    @PilotPete-662 5 років тому +2

    Beauty. Nice flying, Andrew. Aerial shots are fun!
    Peter

  • @julianhumphrey4843
    @julianhumphrey4843 5 років тому +1

    Very nice, ihave the larger 635 dart and really like it, and it glides far better than i expected

  • @alanreid250
    @alanreid250 3 роки тому

    Only bought this in Oct and today was the maiden...Chucked using autolaunch and was impressed with the way it glided gently to the grass...something not right...Second launch a lot more successful...helps if you flick the activate throttle switch on ...unexpectedly it did what it was suppose to do..climbed circled ....gain needs tweaking but landed with that stupid grin when you see autolaunch in action....thanks for your input and answering my stupid questions.

    • @AndrewNewton
      @AndrewNewton  3 роки тому

      Haha, that has happened to me so many times.

  • @jcfpv3454
    @jcfpv3454 4 роки тому

    I struggled really hard coming from quads to wings and set up my wings wrong finally found out my ele. Stab was moving in the wrong direction fixed it and has been absolutely fantastic and amazing the dart 250 g is my favorite flys amazing as well as the drift or ar mini wings

    • @AndrewNewton
      @AndrewNewton  4 роки тому

      Oh yes, that would make flying hard

  • @properlytwisted2172
    @properlytwisted2172 5 років тому +2

    Love it!!..great how smooth it is to be so light!..:)

  • @The_Pub_
    @The_Pub_ 5 років тому +1

    Great Sporty Looking Plane.
    I would need FPV with this as I would lose sight of it soon after launching it.
    Looking forward to the “Kopilot” setup.
    Cheers.

  • @GroundControlRC
    @GroundControlRC 5 років тому +1

    Nice review and test flight! I agree this plane needs a bit more power. It seems that's a fairly small motor and prop for the size of the plane but a larger one may have put them over the 250g goal. See you in the Air!

    • @AndrewNewton
      @AndrewNewton  5 років тому +1

      Could handle a motor that is 7g heavier.

    • @GroundControlRC
      @GroundControlRC 5 років тому

      @@AndrewNewton , sounds like a plan ;-)

  • @jibbajabba4597
    @jibbajabba4597 5 років тому +2

    I wonder if you could hack the plywood model to fly indoors with a few tinywhoop parts?

  • @Aarons14bugs
    @Aarons14bugs 5 років тому +1

    Thank you once again for sharing your test piloting experience. It sure is a big help for me deciding what I put into my builds.
    After watching this, I'm glad I picked up the kit version so I can give it some more power. I ordered a 1507 2500kv 2-6s motor I was planning on using. Do you think a 1806 2400kv would be too much? Also, do you think a 20amp esc would be able to handle whichever choose?

    • @AndrewNewton
      @AndrewNewton  5 років тому +1

      Good idea, 20A should be heaps

  • @KenKneknaneek
    @KenKneknaneek 5 років тому

    ha ha Very nice. Got mine in the mail the other day. Have it together now, going to use my radio link 2AT10 transmitter with its R12DS receiver and see how that goes.
    I see 2 cables for the ailerons but it has a third cable the same have to find what that is for. I call it the Baby ZOHD ha ha .. Happy Flying

    • @AndrewNewton
      @AndrewNewton  5 років тому

      3rd cable will be ESC for throttle control I guess.

    • @KenKneknaneek
      @KenKneknaneek 5 років тому

      @@AndrewNewton yes. I realized that later once I saw it attached to the esc lol.

  • @caymanhilldesigns453
    @caymanhilldesigns453 3 роки тому

    How do you have the "go pro" mounted to your hat? I absolutely hate the one I have. it adds so much weight and is a pain to put in and take out. I love the way yours is just sitting there.

    • @AndrewNewton
      @AndrewNewton  3 роки тому +1

      Just a tripod bolt through the brim, and a little wedge tp tilt it up.

    • @caymanhilldesigns453
      @caymanhilldesigns453 3 роки тому

      @@AndrewNewton Thank you so much for the answer.. I was afraid that was it lol. My GoPro doesnt have a tripod hole.

  • @reefer2917
    @reefer2917 5 років тому +1

    It looks FAST!! haha nearly took your head off!! :-P nice model great vid

  • @TakeItToTheGround
    @TakeItToTheGround 5 років тому +1

    I'd be interested if you put a current sensor on 2 & 3 S props. I was thinking of getting this & going 2S with 18650 but a bit concerned it may draw too much current.

    • @AndrewNewton
      @AndrewNewton  5 років тому

      Current draw at Max throttle:
      3x5x3 prop 3S - 7A
      5x5 prop 2S - 8A
      5x5 prop 3S - 11A

  • @nunyabizness9885
    @nunyabizness9885 5 років тому +1

    The old dart kit offers better value and looks to be far stronger. I've put my little dart through hell and only had to glue it back together once in what was a 100kph+ crash. Flies awesome with a cheap omnibus f4 FC running inav and gets ridiculous flight times with a 4s1p 18650 pack.

  • @jimclayton87
    @jimclayton87 3 роки тому

    Hi Andrew, when you say 60/60 on the throws, is that the weight on elevator and ailerons, reducing from 100 to 60? Cheers

    • @AndrewNewton
      @AndrewNewton  3 роки тому +1

      Yes, normal elevon mix is 50/50 but this needs maybe 70 elevator and 30 aileron mix.

  • @OZSCQUADS
    @OZSCQUADS 5 років тому

    Sweet machine.
    Just got my Dart XL running nice.
    Next project is this sub 250g.
    Wondering if you checked the amp usage at full throttle?

    • @AndrewNewton
      @AndrewNewton  5 років тому +1

      Current draw at Max throttle:
      3x5x3 prop 3S - 7A
      5x5 prop 2S - 8A
      5x5 prop 3S - 11A

  • @skinnyguy3184
    @skinnyguy3184 3 роки тому

    Hay Andrew hope your doing well mate, I know you did this review 1 year ago but I've just got around to buying one, I was planning on using 2s 18650, does it have enough power on 2s for a good takeoff?

    • @AndrewNewton
      @AndrewNewton  3 роки тому

      Yes thats what I use for the Dart 250, the drift and talon 250. Need to give a good throw to avoid the dip.

  • @philbarrett3739
    @philbarrett3739 5 років тому

    Hi Andrew, I have a small area behind my house in the UK surrounded by cliff and tall trees so no room for mistakes. I'm after a small and slow model so my question is if you think this Dart will fly quite slow and tight? Many thanks in advance. Also looking forward to seeing how good the copilot is.

  • @Trust.theWord
    @Trust.theWord Рік тому

    Thanks Andrew! Does the ZOHD Dart fly better in high wind than the ZOHD Drift?

    • @AndrewNewton
      @AndrewNewton  Рік тому

      Neither of them are designed for windy conditions but the little dart would handle it better

    • @Trust.theWord
      @Trust.theWord Рік тому

      @@AndrewNewton Thanks, Really appreciate the reply. I’m about to purchase the Dart. In your opinion, which version is better? The 2S or 3S (with 3 blade prop)

    • @AndrewNewton
      @AndrewNewton  Рік тому

      @@Trust.theWord I liked 2S or 3S with the 2 blade prop. Didn't use the 3 blade prop

    • @theoztreecrasher2647
      @theoztreecrasher2647 Рік тому

      @@Trust.theWord Don't run the 2-blader on 3s at WOT (or full RTH current) for more than a half a minute! We have 3 burnt motors to dispute the wisdom of doing that. Oddly no dead ESCs though. 😜😊

    • @Trust.theWord
      @Trust.theWord Рік тому

      @@theoztreecrasher2647 Thank you! I’ll remember that.

  • @etops.flight
    @etops.flight 4 роки тому +1

    Nice!

  • @cinobro6393
    @cinobro6393 5 років тому

    Hi Andrew, just a couple of quick questions:
    - I've heard some negative stuff about its stall characteristics and was wondering how it glides / cruises.
    - It looks pretty nippy and I was wondering if it would be pushing the boundaries of a standard 4-6 football pitch reserve as if it needs a much bigger area I might as well just head further out with a full size model.
    After that crash though you've proved my doubts about durability, would love to see if it can slope too, maybe not with those swept forward wings. Thanks.

    • @AndrewNewton
      @AndrewNewton  5 років тому

      It is quite fast, not for tight areas. Doesn't drop a wing in a stall as far as I can see, just parachutes down

  • @kevinwood4263
    @kevinwood4263 3 роки тому

    hi andy could you tell me were the cg on the zohd dart 250g thanks love the vids

  • @markvandesande8855
    @markvandesande8855 5 років тому +1

    Nice plane but to fast for me at the moment. And expensive but not overly might be one for the future quick for the size.😁👍🇬🇧

  • @mortache
    @mortache 5 років тому

    Nice glide, curious about the wing loading of it!

    • @AndrewNewton
      @AndrewNewton  5 років тому

      Wing Cube Loading is about 10 (Wing area 8.4 dm sq)

    • @mortache
      @mortache 5 років тому

      @@AndrewNewton that explains why its so fast

  • @fcass
    @fcass 4 роки тому

    Does the PNP version come with GPS stabilizer fc?
    Thanks (already ordered it a few days ago, but can't find answer anywhere....)

    • @AndrewNewton
      @AndrewNewton  4 роки тому +1

      No, you're thinking of the Kopilot system. That is an extra option.

    • @fcass
      @fcass 4 роки тому

      @@AndrewNewton well the description of course on banggood leaves a lot to be desired. It doesn't say if kopilot lite comes with PNP. And incorrect answers on questions hehheh.
      Thanks

  • @peterzingler6221
    @peterzingler6221 4 роки тому

    Would it be possible to use magnets instead of the tape glue.. I would like to put it in a backpack

  • @jcfpv3454
    @jcfpv3454 4 роки тому +1

    I would like to see that cardboard wing fly 👍

  • @MrZeek101
    @MrZeek101 5 років тому

    great review great little wing Sir Andrew
    a little out to lunch on the price $175.00 Canadian

    • @MrZeek101
      @MrZeek101 5 років тому

      @MAD GRUMPYMAN lol just found it for $147 geekbuying Canadian

  • @RGCbaseace
    @RGCbaseace 5 років тому

    So i went with the matek F411-WSE fc why limit this lil ripper when one does not have too still trying to keep it lightweight almost got all the electronics setup still waiting a few bits in the post do you know whom may have a good preset inav dump

    • @AndrewNewton
      @AndrewNewton  5 років тому +1

      The one you seek is Bonafidepirate, he has this setup

    • @RGCbaseace
      @RGCbaseace 5 років тому

      @@AndrewNewton thank you

  • @gerardmazz
    @gerardmazz 3 роки тому

    Can I use a 2s 7.4v 2000mah lipo battery on this dart I have a lot of them

  • @seafax
    @seafax 5 років тому +1

    Wow. I thought the new regs were about to totally destroy the hobby but look what's happened. The most exciting new arrival since the tricopter.

    • @AndrewNewton
      @AndrewNewton  5 років тому

      Yes this is clever design and marketing

  • @David-ts9tq
    @David-ts9tq 3 роки тому

    How does this compare with the nano skyhunter?

    • @AndrewNewton
      @AndrewNewton  3 роки тому

      Similar performance but the Dart250 is lighter

    • @David-ts9tq
      @David-ts9tq 3 роки тому

      @@AndrewNewton Which would you recommend for best cruising and smooth video?

  • @Billbobaker
    @Billbobaker 5 років тому

    Great review. you've a pretty place to fly but kinda wet..
    Do you recommend the Mobius C2..
    I've been trying to find a Gopro Sessions but used is the only available way to get them now.

    • @AndrewNewton
      @AndrewNewton  5 років тому +1

      Yes Mobius C2 is my favourite for onboard

  • @RGCbaseace
    @RGCbaseace 5 років тому

    How did you do that are you running a sbus to ppm with your rxsr ?

    • @AndrewNewton
      @AndrewNewton  5 років тому

      R-X6R receiver has SBUS and PWM

    • @RGCbaseace
      @RGCbaseace 5 років тому +1

      @@AndrewNewton thought you said in the video rxsr
      my bad still outstanding job sir well done cant wait till mine arrives

  • @MartyLJ57
    @MartyLJ57 5 років тому

    What would be a non-FPV version?

  • @marielizysurourcq
    @marielizysurourcq 5 років тому

    Would be very interested to see a review in 2S, with a small battery (around 450mah) and small camera. That would be my aim personally

    • @ScowlerJase
      @ScowlerJase 5 років тому +1

      How about a Strix 2S pack - 3200mah as used in the Nano Goblin ( that gets an hour of flight time! )

    • @marielizysurourcq
      @marielizysurourcq 5 років тому +1

      @@ScowlerJase Hi, my interest is more in the fact that I can put this plane in a small backpack, assemble on the field, fly slow proximity FPV and don't fear lots of crashes. So, 2S + very low weight (circa 180 g)

    • @AndrewNewton
      @AndrewNewton  5 років тому +1

      Current draw at Max throttle:
      3x5x3 prop 3S - 7A
      5x5 prop 2S - 8A
      5x5 prop 3S - 11A

    • @marielizysurourcq
      @marielizysurourcq 5 років тому

      @@AndrewNewton Oh ! thanks ! I really like your "pro" reviews btw. Will certainly buy this one because of detachable wings.

  • @jo2lovid
    @jo2lovid 5 років тому

    It's smooth as!!!
    Donk!
    #Landed.
    But soooooo quiet.

  • @EnglishTurbines
    @EnglishTurbines 5 років тому +2

    Nice little plane, but at £50 for a kit only is just not on IMO.

  • @irwan_rc2416
    @irwan_rc2416 4 роки тому

    Can it fly slower?

    • @AndrewNewton
      @AndrewNewton  4 роки тому

      Yes it does slow nicely

    • @irwan_rc2416
      @irwan_rc2416 4 роки тому

      @@AndrewNewton thank you, just hope that this one can be a slow low parkflyer

  • @cyberspooky
    @cyberspooky 5 років тому +1

    I noticed you’ve had your ears lowered 😎 should of left the centre a bit longer lol , zippy little thing 👍

  • @Hyperious_in_the_air
    @Hyperious_in_the_air 4 роки тому

    I'm going to get one, reinforce the hell out of it, print a dual motor mount, and make it into a 150mph plane.

  • @leemaples1806
    @leemaples1806 5 років тому +1

    It really gets up and goes. Love it but, too fast for this novice. lol Cheers!

    • @goku445
      @goku445 3 роки тому

      You are right. Sadly, small planes are not beginner friendly.

  • @HowToDIYRc
    @HowToDIYRc 5 років тому

    wow sudden crash normale planes with go into the bin