I should really thank Mr.Manas Patnaik He is the reason i passed in Engineering Graphics (1st semester Subject in Anna University, Tamil Nadu), I've wrote for 8 semesters ,all the 8 semesters I've failed continuously ,I fed up,this subject is my nightmare all my friends have passed this subject in 3rd semester, I've writing it even after they graduated, I wrote with juniors which is really embarrassing,at last by this channel I've passed, I'm feeling so happy after 4yrs of continous failure I've passed Special thanks to the team
+John Hebrews Hi John.... First of all congratulations for passing the examination..... It looks as if you have gone through a very tough time.... Anyways.....remember....."When the going gets tough, the tough gets going"..... I wish you good luck, and all the very best in life..... Cheers..,
@@John-bz1fb if someone did not pass in any particular subject in engineering then he will have to pass even after 4 years of completion of degree also....means upto the time of getting *ENGINEERING DEGREE FROM COLLEGE*
Manas sir is the god of engineering drawing , thanku for teaching with such amazing concepts , it really helps us in ed and also thanku for covering each topic carefully..🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
A lot of thnx for it sir, because in the last ED class, I was absent and my teacher had taught about projection of plane, I had confusion, but now I clear abt it, thnx sir
Hi Haseeb.... Thanks for appreciating my work... And do share this channel with your friends, juniors and classmates so that all can benefit. All the best...
Sir I told about channel to all my friends in the college. They all must be watching your channel right now for our exam tommorow xD You really explain so well
+sumanth CHOUDHARI Hi Sumanth.... Thanks for appreciating the content..... All the best and do let your friends know about this channel so that they can also benefit..
+Vijay Choudhary Thanks for your wonderful comment vijay... All the best and do let your friends know about this channel on drawing and mechanics so that they can also benefit.....
Thank u so much sir Ur explanation is very nice that i used to follow ur videos regularly all topics i covered in ED with help of ur videos . Ur explaining with simple terminology nd simple tricks to remember thank u so much sir once again 👌👌👌👌👌👌👌👌
Thanks Harshita and ll the best Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English 1. Orthographic Projection: ua-cam.com/video/WG6H2pISUzQ/v-deo.html 2. Projection of Point: ua-cam.com/video/fK4h5gM73w8/v-deo.html 3. Projection of Line: OLD: ua-cam.com/play/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV.html NEW: ua-cam.com/video/pzE0D-Ijxd4/v-deo.html 4. Projection of Plane: ua-cam.com/play/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg.html 5. Projection of Solid: ua-cam.com/play/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm.html 6. Section of Solid: ua-cam.com/play/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v.html 7. Development of Surface: ua-cam.com/play/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v.html 8. Auxiliary Plane: ua-cam.com/play/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB.html 9. Interpenetration of Solids: ua-cam.com/play/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM.html 10. Isometric Drawings: ua-cam.com/play/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83.html 11. Conic Sections: ua-cam.com/play/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ.html 12. Cycloidal Curves: ua-cam.com/play/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z.html 13. Involute: ua-cam.com/play/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa.html 14. Plain Scale and Diagonal Scale: ua-cam.com/play/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9.html 15. Complete Engineering Drawing in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi 1. Orthographic Projection in Hindi: ua-cam.com/play/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY.html 2. Projection of Point in Hindi: ua-cam.com/play/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH.html 3. Projection of Line in Hindi: ua-cam.com/play/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir.html 4. Projection of Plane in Hindi: ua-cam.com/play/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U.html 5. Projection of Solid in Hindi: ua-cam.com/play/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P.html 6. Scales Hindi-Urdu: ua-cam.com/play/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB.html Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English 1. Forces: ua-cam.com/play/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0.html 2. Friction: ua-cam.com/play/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m.html 3. Shear Force and Bending Moment: ua-cam.com/play/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7.html 4. Trusses: ua-cam.com/play/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7.html 5. Centroid and Centre of Gravity: ua-cam.com/play/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p.html 6. Moment of Inertia: ua-cam.com/play/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy.html 7. Dynamics: ua-cam.com/play/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z.html 8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
Not to worry.,.. Entire content is here...... But do respect and follow instructions from your teachers. All the best. 1. Engineering Drawing (English) : ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html 2. Engineering Drawing (Hindi) : ua-cam.com/play/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU.html 3. Engineering Mechanics: ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html 4. Mechanics of Solids: ua-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html 5. Theory of Machines: ua-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html 6. Machine Drawing: ua-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html 7. Engineering Services Examination_Engineering Drawing_Prelims: ua-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html 8. Physics for Class 11: ua-cam.com/play/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM.html 9. Manas Speaks Series: ua-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html 10. Physics Channel Link: ua-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html My AMAZON Store - For all you students. www.amazon.in/shop/manaspatnaik
Hello sir , there is a bit confusion for drawing inital assumption on hp or vp based on surface inclination. if we are given surface inclined to vp we have to draw in hp/vp,if it is given surface inclined to hp we have to draw in hp/vp
Sir you are awesome all videos made by you are best ever. this is totally practical i can understand easily.thanku please continue your work we are with you.and please reply me
Hi Sumanth....... I am sure, this channel is helping you learn. All the best and do let your friends know about this channel so that they can also benefit....
Hi Anamul..... Thanks for appreciating my work.... Keep learning and do let your friends know about this channel so that they can also benefit... All the best.....
Hi UbaidThanks for appreciating my work…and all the best for your examI am sure this channel is helping you learn…You can support my channel by donating and do watch this video: ua-cam.com/video/WfyUEhxhjZUH/v-deo.htmlave a nice day.
an electric bulb is hanging from the ceiling of a room 2 metre above the floor and in the centre of the room .the size of the room is 6 metre*5 metre. determine graphically the distance of the bulb from any bottom corner of the room. Sir please solve the question
Hi Revathy Thanks for your appreciation... All the best.... And do let your friends know about this channel on drawing and mechanics so that they can also benefit.....
Sir ur lectures were great .. but what about Corner inclination ..and how about hexagons..if u have already done for the two plz share the links..Tnx in Advance
Sir,thank u for uploading this video ,what about when the surface is parallel or perpendicular to both planes,and explain problems on those condition sir,
Vardhini how could a plane be parallel to HP and VP at the same time....? And if a plane is perpendicular to both HP and VP then its a profile plane... I have spoken about that in my introductory video on Orthographic Projection.
@manas sir second wala Ka ans 2nd option bhi to Hota wha bhi to edge 90 me inclined ho rha ?? If 1 option lenge then fig to horizontal ho ja rha 🙄🙄🙄🙄🙄🙄🤔🤔
Sir in the problem of planes when we have to keep a plane on xy line above or below and when we have to keep a plane at a distance above or below xy line.
Draw the projection of triangular plane of side 40 mm resting on one of its edges The the base edge is inclined at 25 degree to VP and the plane inclined at 30 degree to HP. Sir please do the question for me thank you
this channel should be declared as national channel for graphics
Thanks for appreciating my work Venkatesh......
I Wish you good luck.......
When the edge is perpendicular to HP the second drawing is also having its edges perpendicular
I vote and support
@@ArtisticConception-HS light
yep
This is how a concept should be taught....
Exactly😅
Exectly😅
I should really thank Mr.Manas Patnaik
He is the reason i passed in Engineering Graphics (1st semester Subject in Anna University, Tamil Nadu), I've wrote for 8 semesters ,all the 8 semesters I've failed continuously
,I fed up,this subject is my nightmare all my friends have passed this subject in 3rd semester, I've writing it even after they graduated, I wrote with juniors which is really embarrassing,at last by this channel I've passed, I'm feeling so happy after 4yrs of continous failure I've passed
Special thanks to the team
+John Hebrews
Hi John....
First of all congratulations for passing the examination.....
It looks as if you have gone through a very tough time....
Anyways.....remember....."When the going gets tough, the tough gets going".....
I wish you good luck, and all the very best in life.....
Cheers..,
Manas Patnaik Sir Thank you for your guidance and support
Kudos to your UA-cam channel
Wishing it grow higher and higher
@@John-bz1fb hey bro what are you pursuing now....
@@riteshrk18 I'm currently doing ux ui design course
@@John-bz1fb if someone did not pass in any particular subject in engineering then he will have to pass even after 4 years of completion of degree also....means upto the time of getting *ENGINEERING DEGREE FROM COLLEGE*
Manas sir is the god of engineering drawing , thanku for teaching with such amazing concepts , it really helps us in ed and also thanku for covering each topic carefully..🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
Manas Sir at present "2020 " Due to covid-19 lockdown .we r suffering from online classes at zoom .ur teaching is helpfull to study EG thank u sir,,
Exactly I'm in the same position but bro u nailed it Tnq so much
A lot of thnx for it sir, because in the last ED class, I was absent and my teacher had taught about projection of plane, I had confusion, but now I clear abt it, thnx sir
Pass ho gye sir aj apki vjh se.. Bht bht dhanyavaad
Sir....a huge thanks to you...i achieved a top grade in engineering drawing by watching Ur very well explained videos....thank a lot sir....
Congratulations Ravi....
I am very happy for you....
Keep learning and keep working hard.....
All the very best in life...........
thank u sir
Sir i have cleared drawing by learning from your video's sir ....
Thank you so muchhh sir
I have no words
Congrats🎉🎊
All the best in future......
Me and my friends all are following this channel only sir. We are getting knowledge in drawing that's because of you sir. Thank you sir
Itni achi channel for drawing ❤
Sir its only by your videos i could understand ED. Thank you very much!!!
Hi Haseeb....
Thanks for appreciating my work...
And do share this channel with your friends, juniors and classmates so that all can benefit.
All the best...
sir really explaining in clear cut way
Best teaching methods sir , best teacher for Engineering drawing sir 🙏
Sir , i am from NIT but i dont listen to my professor's class because i watch your videos. You are teaching better than our professors
same here, which NIT are you from ?
@@himanshushekhardas1730 NIT JALANDHAR nd u?
@@Official-tk3nc i am from NIT warangal , whats your branch ?
Ece and urs?
@@Official-tk3nc mine ECE too !!!
Sir ur way of teaching very good 👍 sir ...really amazing....
Sir! 🙏🏻😊u+ur channel is the biggest gift 📦 that had send by god for me
Your videos helped me much....
Aji dhanyavaag😄😉
Sir please take some time to make lecture notes of these tutorials if possible. Your teaching method is absolutely awesome! Great work.
You are the best teacher for this subject sir . If you can make a video on loci of points then it will help many of us student . Thank you sir .
Sir I told about channel to all my friends in the college.
They all must be watching your channel right now for our exam tommorow xD
You really explain so well
Thats great Anmol....
And all the very best to all u guys....
hurrayyyy sir!!!!! Jaan bacch gyi humari
i think your teaching is the best for this subject,sir
we can understand too better .....thnx for publishing these vedious and making us easy to learn.....
+sumanth CHOUDHARI
Hi Sumanth....
Thanks for appreciating the content.....
All the best and do let your friends know about this channel so that they can also benefit..
Thank u manas sir. Really it is helpful for the students who are going to write ED after quarantine. I'm too...
great teaching sir
you have made a distratrous subject into such an an easy subject
highly impressed by your way to present
thanks a lot
+Vijay Choudhary
Thanks for your wonderful comment vijay...
All the best and do let your friends know about this channel on drawing and mechanics so that they can also benefit.....
ok sir
it will be my pleasure to tell others about you bcoz i know my freinds weak in eg and who wants to do excel in eg
Ur gr8 sir.i will let my all friends know abt this channel.it would have better if we had a sir like u in our college😍
Thank u so much sir
Ur explanation is very nice that i used to follow ur videos regularly all topics i covered in ED with help of ur videos .
Ur explaining with simple terminology nd simple tricks to remember thank u so much sir once again 👌👌👌👌👌👌👌👌
Thanks Harshita and ll the best
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English
1. Orthographic Projection: ua-cam.com/video/WG6H2pISUzQ/v-deo.html
2. Projection of Point: ua-cam.com/video/fK4h5gM73w8/v-deo.html
3. Projection of Line:
OLD:
ua-cam.com/play/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV.html
NEW:
ua-cam.com/video/pzE0D-Ijxd4/v-deo.html
4. Projection of Plane: ua-cam.com/play/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg.html
5. Projection of Solid: ua-cam.com/play/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm.html
6. Section of Solid: ua-cam.com/play/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v.html
7. Development of Surface: ua-cam.com/play/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v.html
8. Auxiliary Plane: ua-cam.com/play/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB.html
9. Interpenetration of Solids: ua-cam.com/play/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM.html
10. Isometric Drawings: ua-cam.com/play/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83.html
11. Conic Sections: ua-cam.com/play/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ.html
12. Cycloidal Curves: ua-cam.com/play/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z.html
13. Involute:
ua-cam.com/play/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa.html
14. Plain Scale and Diagonal Scale: ua-cam.com/play/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9.html
15. Complete Engineering Drawing in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi
1. Orthographic Projection in Hindi: ua-cam.com/play/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY.html
2. Projection of Point in Hindi: ua-cam.com/play/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH.html
3. Projection of Line in Hindi: ua-cam.com/play/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir.html
4. Projection of Plane in Hindi: ua-cam.com/play/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U.html
5. Projection of Solid in Hindi: ua-cam.com/play/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P.html
6. Scales Hindi-Urdu:
ua-cam.com/play/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB.html
Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English
1. Forces:
ua-cam.com/play/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0.html
2. Friction:
ua-cam.com/play/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m.html
3. Shear Force and Bending Moment: ua-cam.com/play/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7.html
4. Trusses:
ua-cam.com/play/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7.html
5. Centroid and Centre of Gravity: ua-cam.com/play/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p.html
6. Moment of Inertia:
ua-cam.com/play/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy.html
7. Dynamics:
ua-cam.com/play/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z.html
8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
@@ManasPatnaikofficial thank u sir for giving these links
thank you sir. Now the concept is crystal clear
Ur amazing sir 😍💓💓
You're super sir, no one is match to you. Thank you sir.
Thank you very much bro
my drawing sir don't how to teach the subject
but you are clearing all my doubts clearly
Not to worry.,..
Entire content is here...... But do respect and follow instructions from your teachers.
All the best.
1. Engineering Drawing (English) :
ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
2. Engineering Drawing (Hindi) :
ua-cam.com/play/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU.html
3. Engineering Mechanics:
ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
4. Mechanics of Solids:
ua-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html
5. Theory of Machines:
ua-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html
6. Machine Drawing:
ua-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html
7. Engineering Services Examination_Engineering Drawing_Prelims:
ua-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11:
ua-cam.com/play/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM.html
9. Manas Speaks Series:
ua-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Physics Channel Link:
ua-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
My AMAZON Store - For all you students.
www.amazon.in/shop/manaspatnaik
A very good teacher, friend, mentor. Thank you sir. Arigato srnsei😊
very nice, so straight forward.
Thank you Moksha
1. Engineering Drawing Playlist: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
2. Engineering Mechanics Playlist (OLD): ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
3. Engineering Mechanics Playlist (NEW 2023-2024): ua-cam.com/play/PLIhUrsYr8yHxeypEyVdWeGNxWHjNxU_JP.html
4. Mechanics of Solids Playlist: ua-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html
5. Theory of Machines / KOM / DOM Playlist: ua-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html
6. AUTOCAD Playlist:
ua-cam.com/play/PLIhUrsYr8yHyLArdiiSDLa0Fmz8YKIy7G.html
7. Machine Drawing Playlist: ua-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html
Visit Channel Page(@manaspatnaikmech) for Playlists on specific topics.
Download the Manas Patnaik App for Premium content : bit.ly/3wMRxoc
Sir all ur videos r very useful and r the best among anyone. Tq for ur guidance
You are welcome and all the very best
Your videos are easy to understand and very helpful
Hello sir ,
there is a bit confusion for drawing inital assumption on hp or vp based on surface inclination.
if we are given surface inclined to vp we have to draw in hp/vp,if it is given surface inclined to hp we have to draw in hp/vp
Sir you are awesome all videos made by you are best ever. this is totally practical i can understand easily.thanku please continue your work we are with you.and please reply me
awesome teaching skills everyone can learn for here thanks sir
Sir , Is this method is also applicable for projection of solid?
Sir,for a semi-circular lamina,can the diameter be parallel to xy line
sir u didnt explain the corner inclination on reference planes.so pls upload the video about it.it will be further useful for us...thnk u
Amazing video sir. Thank you Sirji : )
Tq sir for your support our drawing sir had gone........... but you given hope tqq soo mch
Hi Moses.......
Keep learning and do let your friends know about this channel so that they can also benefit...
All the best.....
sir upload lectures on vernier scale plz
i am impressed by your teching way
Awesome Teaching...Fan of this guy
Hi Sumanth.......
I am sure, this channel is helping you learn.
All the best and do let your friends know about this channel so that they can also benefit....
.
wonderful sir and thank you for saving my day
+vasu pandita
Hi Vasu Pandita....
All the best and do let your friends know about this channel so that they can also benefit.....
your the wonderful explainer, sir tq so much
Thank you Harshita....
Enjoy the videos and all the best
Sir in the horizontal Pentagon can we take its mirror image Where the perpendicular surface is on the right
??
Sir why we should take the 90° with the base line when the edge is inclined about an angle with Hp or Vp ...???????
Plz answer 🙏🙏🙏🙏
Thank you so much sir.Your videos are awesome.
sir ur lactures r very helpful...thank u
Hi Anamul.....
Thanks for appreciating my work....
Keep learning and do let your friends know about this channel so that they can also benefit...
All the best.....
Thank u manas sir for ur tutorials
Is the first condition assumption apt for any question in projection of planes?
Sir in edge inclination, angle should be taken and line should be drawn from which side ? left or right?
It's your choice.....clockwise or anticlockwise
@@ManasPatnaikofficial thank you sir
Sir why we are taking perpendicular when they given edge inclined to vp or Hp
Sir can you tell me something about how we can solve the problems based on orthographic projection,and where we have to make hatching lines etc.
thanks sir for such a great concepts
Hi UbaidThanks for appreciating my work…and all the best for your examI am sure this channel is helping you learn…You can support my channel by donating and do watch this video: ua-cam.com/video/WfyUEhxhjZUH/v-deo.htmlave a nice day.
Which side i should start drawing in upper part of xy line or in lower part of xy line in different questions i am not understanding
Sir , why the edge perpendicular to xy is the correct choice? ?
Sir ji Agar corner nearest to vp is 15 mm away from it to iska kya meaning hota hai ?
Sir, what is the basis for taking beta angle. 1) when should we take it. 2)when should we not? Please reply
Sir, your video helped me a lot. In my college internal exam, I have gotten highest marks in EG.
Thank you so much sir ♥️ god bless you sir
can a question like surface inclined to HP and edge also inclined to VP. if yes than what change will come please tell me.
Sir in 3rd step when we have to take inclination left side and rightside
Both are correct
Edge on ground means . should ok let place on xy line?
What is the pictorial representation of plane resting it's side in HP??
why should we consider the first plane when it is given that edge is inclined to vp/hp?
an electric bulb is hanging from the ceiling of a room 2 metre above the floor and in the centre of the room .the size of the room is 6 metre*5 metre. determine graphically the distance of the bulb from any bottom corner of the room.
Sir please solve the question
Nice video....need more basic concepts
Thanks Madhu and all the best
if the surface is inclined to VP and edge is also inclined to VP then ?what will be the initial step?
sir what about Hexagaone. If we consider it Inclined to VP or HP
Very well explained sir
Sir I'm continuously watching your uploads, thanku sir.please keep doing this continuously sir.
Hi Revathy
Thanks for your appreciation...
All the best....
And do let your friends know about this channel on drawing and mechanics so that they can also benefit.....
Good evening sir,Thank u sir for your reply .Ok sir I'll do that ,my name is swathi,This is my mom's mail id.
+Revathy Mani
Allright Swathi.....
All the best in life.....
Sir ,from where you have done your be and m tech
Can you please tell me what is combined first angle and third angle projection.
What about questions in which the edge is parallel to the VP, so how to go about it?
Sir ur lectures were great .. but what about Corner inclination ..and how about hexagons..if u have already done for the two plz share the links..Tnx in Advance
It hasn't been dealt separately but the concept has been explained in problems...,..
Do watch it, I am sure you will get the crux of the idea..
@@ManasPatnaikofficial sure sir
amazing explanation sir !!
All the best.......
Subjectwise Playlist:
1. Engineering Drawing/Graphics (English): ua-cam.com/video/WG6H2pISUzQ/v-deo.html
2. Engineering Drawing/Graphics (Hindi): ua-cam.com/video/SB83cUaAiCM/v-deo.html
3. Engineering Mechanics / Applied Mechanics: ua-cam.com/video/Z4WN2Z9okfs/v-deo.html
4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: ua-cam.com/video/Co4YlavCpeQ/v-deo.html
5. Theory of Machines: ua-cam.com/video/Co4YlavCpeQ/v-deo.html
6. Machine Drawing: ua-cam.com/video/iFCnFUR9Gdc/v-deo.html
7. Engineering Drawing for Engineering Services Prelims: ua-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11: ua-cam.com/video/0fejUC79LZY/v-deo.html
9. Manas Speaks Series: ua-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Channel 2 Link:
ua-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
Sir from where we should start for drawing a plane diagrams
sir what if surface as well as edge is inclined to HP? then we will be going for the edge parallel to XY line?
I Didnt get your query sahil.....
Manas Patnaik what if surface as well as edge makes an angle with HP
Well sahil......it would be better if u can post the description of such a problem
Sir why to keep that edge perpendicular to xy if it is inclined?
No reason given, just rott it like you did earlier. This is #Engineering
Add playlist - series over description
hope you will do sir 🙂
sir will you tell me the difference b/w corner and edge
sir, why r we doing edge perpendicular to xy?
Sir,thank u for uploading this video ,what about when the surface is parallel or perpendicular to both planes,and explain problems on those condition sir,
Vardhini how could a plane be parallel to HP and VP at the same time....?
And if a plane is perpendicular to both HP and VP then its a profile plane...
I have spoken about that in my introductory video on Orthographic Projection.
Nice
If hexagon abcdef is in hp and 10 mm away from vp and llel to vp then where the edge e'd' is above hp or in hp
@manas sir second wala Ka ans 2nd option bhi to Hota wha bhi to edge 90 me inclined ho rha ?? If 1 option lenge then fig to horizontal ho ja rha 🙄🙄🙄🙄🙄🙄🤔🤔
Majaa aa gayaa sir Ed padhnae mae
sir i have a question
If a circular plane is inclined at 30 degree with the HP and 60 degree with VP, it side view will be ----------------------
+Ganesh Modanwal
Its a line......
thank you sir
but we can not understand how it is possible.
What should be thickness of axis line in solid edge software
Sir in the problem of planes when we have to keep a plane on xy line above or below and when we have to keep a plane at a distance above or below xy line.
If nothing has been particularly stated....then u can always keep it on xy i.e you are assuming the plane to entirely resting on wither HP or VP.
Why option 1 is correct when perpendicular to edge of plane
Great! My doubts are getting clear
0:20 what is plane?
0:50 3 steps assumption
Draw the projection of triangular plane of side 40 mm resting on one of its edges The the base edge is inclined at 25 degree to VP and the plane inclined at 30 degree to HP. Sir please do the question for me thank you
How do I know that the plane is to be draw above the xy reference line or below the reference line
front views are drawn above xy line and top views are drawn below xy line.......
Can you explain corner edge side variation of planes please
Sir I had one doubt ,surface incline to hp ante akadha draw cheyale pentagon above xy axis or below xy axis
Below
sir plz make a video having pentagonal,hexagonal or rectangular lamina with circular hole in it