Epic Airguns Epic Two - Part 1 - Initial Impressions of this eagerly anticipated rifle
Вставка
- Опубліковано 19 жов 2024
- I’ve finally got my hands on the Epic Two Air Rifle thanks to my good friends at Vector Air (www.vector-air...). The rifle is solid and smacks of quality in this tactical stock! I’m excited to see what this UK sub 12 version will do, based on the accuracy videos I’ve seen. Stay tuned!
If you like the videos and the channel, and if you’re happy to support further, then here’s a link to my Ko-Fi page. If you want you can buy me a coffee or put something towards pellets for the reviews. Anything is greatly appreciated and it means so much that you’ve donated. Thanks so much :)
ko-fi.com/zubysan
Been waiting fir thus one in FAC😮
Can’t wait until you range test it👍
that’s a nice rifle very much my style indeed . will be interesting to see the that cz barrel in action 👍
Nice design!!!🇨🇱🇬🇧
Does look like a smart gun. Would like try one in high power FAC. From what I hear its great in high power and loves slugs. Worth a close look for sure.
The small compact has a 92cc cylinder and the two longer versions have a 240cc cylinder. When you unscrewed the moderator, it looks like the silencer split and part of it remained on the barrel. Website states it is a 1/2 UNF thread, but what you unscrewed certainly looked bigger. Will be interesting to see how you get on with it.
I hope they changed their mind and made it 1/2 UNF so we do not need adapters, i have a AGT Vulcan 3 and i got a starter section for my Huma moderator so i can use that instead of a adapter when i use it on that rifle.
How about if you swapped cocking handle over, can the stock still fold over ??????
@@peashooter950 Picked mine up yesterday. There is a 1/2 UNF thread adapter on the end of the shroud for standard moderators. To fit the moderator from EPIC, you unscrew the 1/2 UNF adapter on the shroud and then the EPIC moderator screws directly onto the shroud as seen in the video.
If you swap the cocking lever over, then the stock will not fold over into the full locked position. It also obstructs the cocking lever, so you cannot operate it.
@@three-phase562 Sweet THX for the INFO
I am personally interested in using my existing 1/2 UNF moderators as something like that necessitate a permit, so i can not buy the Two with its own one without going thru the annoying process of applying for yet another permit.
The issue with swapping over the lever was someone else that asked it somewhere i think on airgun nation forum i would not need to swap it over but i would like a foldable stock.
What caliber did you get ?
Us Danes are locked to 4.5 mm unless you have a hunting permit, theoretically sou should also be able to buy a bigger caliber in a shooting club if you are a member, BUT no, all clubs only shoot 4.5 mm in the standard Olympic disciplines so probably not possible.
I am willing to bet i cant even take my 4.5 mm and go shoot it in any club here,,,, stupid fuel the game in Denmark.
@@peashooter950 Mine is sub 12ftlb, 4.5mm caliber with 550mm barrel, I also opted for the bag rider and monopod. They both fit and still allow the stock to fold up and close properly.
I have noticed that when using a 1/2" UNF moderator, if it is longer than 120mm ,then the rifle will only just fit inside the case with the butt pad fully closed. Anything longer and you will need to fold the stock to fit the rifle in the supplied case, which the case will close with a folded stock.
The channel built into the Arca rail is not compatible with M-Lok T-Nuts, going to see if I can file some down and get them to fit, otherwise it is a bipod with an Arca rail clamp.
Gun laws are tight in the UK as well, hence the sub 12 rifle for me.
very cool
fill probe? good grief.... we gotta get to simple QD fittings and call it a day.
One minor gripe has to be no SSL, virtually bench rest ready from the box👍👍👍👍👍👍👍👍👍👍👍😎😎😎😎😎😎😎
When will part two be out I'm interested to see the range results
Part 2 coming very soon. Some very interesting results!
Any sign of part 2
Part 2 is definitely coming very soon…promise :)