Technical welder for Installation./working tricks new welder.
Вставка
- Опубліковано 11 січ 2024
- #workingshort #workout #skills #installation #tricks #welding #steelconstruction #steel#column #stickwork #welder99 #welder #weldertube #share
Thank you for subscribe.
I like that a mask and no shield lol
Very good 👍
What number filter do tou use for welding fumes?thanks for sharing very nive video...
技術観ました。素晴らしいですね。
This guy is a real pro! Nice work!
Yes, thanks
로프가 밧줄이라니? 안전모는 온데간데 없고? 큰일나요.
同業者です。お疲れ様です♪
Bonjour DG
Que pedazo de perfil H 😮
Chaque fois chaque fois je regarde votre je veux voir vos vidéos ça j'aimerais que si au moins j'aurai ok mais
선생님 이렇게 큰 h빔은 처음 봤어요. 어디서 살수있나요 ?
Для чего она тебе? Ты будешь строить Эйфелеву башню у себя во дворе? 😅
작업복이 한국이네 ㅋㅋ
No welder does a tack without looking at it,he is a fabricator
Preheat to the very least 350° usually the tack will crack or weld if you dont
Bonjour
As Ironworker I've seen alot of crap fast welds by guy's in to much of a hurry and no prep just like this guy with no PPE !
Your damm rht M O 38 years cert.welder 7018 and 232 .072 seismic wire and 35 years structural Fabricator always pre heat at least 350° for 1" steel
That’s right, no spec, no Code of construction, so no WPS. Welder likes the “looks” of his weld but cold lap til hell freezes over! Rejected!
laser cutting hole
Y la mascarilla. ¿ cuando ?😮😮😮
Beritahu saya jika anda mempunyai kerja di sini
Safety squints = Engaged
Bonjour, comment allez-vous Je viens du Maroc et ma profession est chauderonni et je recherche un endroit pour travailler. Pouvez-vous m'aider
You have to preheat no experience
Az alap a fémtiszta felület! Ez nem az! A gyökökbe nem heftelünk elektródával! Csak annyi fűzővarratot amennyi szükséges és csak oda ahova feltétlenül kell! A másik hegesztő kolléga már végzett a hegesztéssel , akkor miért nem ő tűzte meg Co2 vel??
Hello dear sir I am fitter I have 27 years experience in my technical field give me job
각장은 개 줬나 버티컬로 올려도 지킬건 지켜야지. 이런건 올리지 마셈 울나라 90년대 스타일
thats a big lump of steel.
What happens when the plate and beam doesn't line up?
Thats why God invented hammers. Big hammers!
Hammers, then yell at the steel fabricators for not making a 90° cut
Can never understand why when you could stand it up it people weld in position would be faster and neater wealded down hand not uphill
Depends on what process, doing a piece like that would suck with SMAW, but some FCAW-S 1/16” and up would make quick work of that in the field.
Our factory specializes in manufacturing welding materials submerged arc welding agent for 30 years, win-win cooperation.
Tan feo eso de tener en la mano la mascarilla. Yo digo que tiene que ir . Donde corresponde en la cabesa. Vaje y suba. 😮😮😮😮
Hello
Yes hello.
Pentagon baja GAL VANIS.
Gerbong, gerbong, gerbong, VAN gerbong VAN Gerbong :
1. Sin
2. SNi
3. Pentagon Van gerbong VKRS Selasa, 19 Maret, 2024 💹©️®️💲🙏🙏🙏🙏
please clean a metal before fitting and welding!
Any steel over an inch thick is supposed to be preheated your weld is no good
what for?
Dave tack welds during fit up do require preheat unless they are to be ground out during weld out and incorporated into the weldment. And I've preheated plenty joints with weldments less than 1"T, as per the WPS. IM SURE THE INDUCTION BLANKETS or RoseBud went to work prior to weld out
Looks Good to me 👍
Anything 3/4 to 1-1/2 inch thick needs to be preheated to a minimum 150 degrees.
Anything 1-1/2 to2-1/2 225 degrees .
Anything above 2-1/2 needs to be at 300 .
This is per AWS d1.1 structural code . This is to prevent hydrogen cracking and has to be done it would not pass UT . This is very common knowledge for anything structural . With that being said looks like he was just tac welding as he never showed the full welding process I would imagine he preheated it unless he’s in Mexico or a 3rd world country
Actually with how there holding there hoods it proably isn’t in America .
Ужас...