Interesting vid as usual👍Those wheels are basically Duratrax. Many Louise products have been rebranded in the USA or were. Seems like the Duratrax name might be going away now. Lots of sales and some products are no longer available, sadly. Nice to see a test on how they perform.
Earl, you always for the most part have great videos. Thanks for your time and effort for making these videos. I’m also in California, Riverside to be exact..
If its anything like the x maxx i put a little bit longer screw thru my xmaxx and a nut on the bottom of the longer screw the nuts that come in the savox servo package works perfect for it and it tightens it up and wont let it back out because that nut is a polylock
Earl, Kev T. Had this ESC attachment thing that allows you to pull the trigger full pull from the beginning of your speed run but it allows the power to come in smooth all the way to top speed. It was on his video at the world record speed attempt with the speed sausage… maybe that would help you?
Earl. Try the Vitavon Bellcrank, and possibly the hubs too. I did that along with the fixed steering arms on the Maxxx 1/10, and it fixed the issue. I also used an upgraded Reefs servo. I know the steering links will not work on that yet, but I am sure Arthur is in the process of making them.
@@earlmoorhead5555yes they do, I just refuse to give Traxxas more money than what I have to, plus I have noticed a huge quality difference. Not just Traxxas but with the Losi Aluminum upgrades. I’m in Pittsburgh, and it’s usually about a week and a half to two weeks to get Vitavon in.
@@earlmoorhead5555 hey man, if that works for you, that works. That’s what the hobbies all about. And it’s cool that you support your local hobby store. I wish I had one. Closest one I have is about 45 minutes from me, and the other an hour. It’s funny, you would assume I live in the middle of nowhere. But I live in the suburbs of Pittsburgh, we just don’t have enough hobby stores here.
Well it's a traxxas so everything is plastic. Even the steering assembly. And weak servo saver. That's why. Didn't even watch the full video to see that.
_To be honest, Traxxas is literally overpriced junk!_ _Sounds like you have already blown your motor with all that cogging!_ _(Additionally, I cannot fathom doing speed runs with a factory transmitter/receiver.. minimum I'd be using would be a 4PM.)_
@@spike-- _😭🌊🌊No amount of milk in the world could get me to shut up about the truth that lies within a very corrupt company! Your soon to bear witness to mass price increases with little to no change across the entire Traxxas line of RC's! Once you understand that a one thousand dollar XMAXX only costs 236 dollars to manufacture then you feel a different type of way!!_
When you figure it out why it's pulling when you hit the throttle, please let me know. My Maxx does that.
Interesting vid as usual👍Those wheels are basically Duratrax. Many Louise products have been rebranded in the USA or were. Seems like the Duratrax name might be going away now. Lots of sales and some products are no longer available, sadly. Nice to see a test on how they perform.
😎💯💯💯
Thanks! Great video Earl 👊👍
I got the hotracing bell crank on my Maxx and it’s a champ
I'm curious...which direction does the drive line turn? Almost sounds like inertia...less revolutions, fades back the opposite direction.
Haha ya u ever herd of truckers having bankers hours lol great vid was thinking about set of these or sixpacks🤷♂️
Keep it up Earl I'm watching for that 100 mph mark!!!! I know you will get it 💯
Hey Earl could you give me the link to those tires?
www.louiserc.com/
Hey earl I’ve seen your old videos when u were running the dbxl and losi 5t you still run those ?
No as California doesn’t have many place to run them
@@earlmoorhead5555 oh yea that’s true. Did u sell them ?
@jakob9299 yes
Yeah we all miss Big Bertha jump sessions !!!
@@earlmoorhead5555you sold your dbxle 2.0 ? Noooo !!! Because of you I got me one, never regret, my favorite rc
You have to get Elizabeth to wiggle her nose so that we could get rid of the traffic today.
Thanks!
Appreciate your support 💯🙏
Earl, you always for the most part have great videos. Thanks for your time and effort for making these videos. I’m also in California, Riverside to be exact..
Sounds like a jet 👍👍
It’s Louise sounds like Lou-eez. Good video buddy 👍
Lot lizard!!! Lmao!! I haven’t heard that in a minute Earl.
If its anything like the x maxx i put a little bit longer screw thru my xmaxx and a nut on the bottom of the longer screw the nuts that come in the savox servo package works perfect for it and it tightens it up and wont let it back out because that nut is a polylock
Earl, Kev T. Had this ESC attachment thing that allows you to pull the trigger full pull from the beginning of your speed run but it allows the power to come in smooth all the way to top speed. It was on his video at the world record speed attempt with the speed sausage… maybe that would help you?
Yes I showed it from perfect pass it’s really a $17.00 aircraft device that was rebranded 👍
@@earlmoorhead5555 oh yeah, that was you… I remember after I sent that post to you… I wasn’t sure it was you but now I know… are you going to try it?
Maybe if I can’t get the steering right to achieve the 100mph nothing will help without the steering control right now
Earl, so we just gone skip over that commercial trucker part! 😂😂😂 Make sure you keep some bottle water! 😂😂😂
Louise tires looking mint, but not an onroad tire. Heavy, offroad pattern may work good on loose dirt.
At that speed maybe your needing down force now. Kinda puzzled too.
Love your vids 👊🏿
Long time no see Eman. LETS GET IT !
If Earl goes missing, we know why. 😂😂 be safe
Earl. Try the Vitavon Bellcrank, and possibly the hubs too. I did that along with the fixed steering arms on the Maxxx 1/10, and it fixed the issue. I also used an upgraded Reefs servo. I know the steering links will not work on that yet, but I am sure Arthur is in the process of making them.
Traxxas makes an aluminum one as well now easier to get in California 👍
@@earlmoorhead5555yes they do, I just refuse to give Traxxas more money than what I have to, plus I have noticed a huge quality difference. Not just Traxxas but with the Losi Aluminum upgrades. I’m in Pittsburgh, and it’s usually about a week and a half to two weeks to get Vitavon in.
@alankowalski8781 yes I’ve had to many issues with packages stolen so I try and order at the hobby shops now
$teel City Pittsburgh in dis bitch!! @@alankowalski8781
@@earlmoorhead5555 hey man, if that works for you, that works. That’s what the hobbies all about. And it’s cool that you support your local hobby store. I wish I had one. Closest one I have is about 45 minutes from me, and the other an hour. It’s funny, you would assume I live in the middle of nowhere. But I live in the suburbs of Pittsburgh, we just don’t have enough hobby stores here.
Ya that servo saver was really messing things up. I'm heading out with my XRT to test some new batteries I bought.
Those are sweet....i need a set great video Man
Well it's a traxxas so everything is plastic. Even the steering assembly. And weak servo saver. That's why. Didn't even watch the full video to see that.
Another Traxxas hater in da house 😂😂😂
Yes with good reason 😂@whatsintheboxx
_To be honest, Traxxas is literally overpriced junk!_ _Sounds like you have already blown your motor with all that cogging!_
_(Additionally, I cannot fathom doing speed runs with a factory transmitter/receiver.. minimum I'd be using would be a 4PM.)_
🍼😭
Not the super tall gearing causing cogging 😮since it’s not sensored ?
@@earlmoorhead5555 _Id bet the internal windings inside the can are becoming fried!_
@@spike-- _😭🌊🌊No amount of milk in the world could get me to shut up about the truth that lies within a very corrupt company! Your soon to bear witness to mass price increases with little to no change across the entire Traxxas line of RC's! Once you understand that a one thousand dollar XMAXX only costs 236 dollars to manufacture then you feel a different type of way!!_
Facts traxxas garbage 🗑️