Great repiar vdeo Dec! Cheers to your local tyre shop for helping you out. Must be a big relief getting the pick up hitch in working order after all this time, and ready to use on the dump trailer.
Great job dec , just bought a case 4240 XL and I see I have a hydraulic leak in back end just over where you fixed pick up hitch and user a little oil at blow pipe when I start any quick solutions here. Is there any where I can get manual for this tractor thanks Dec
Farmer Phil got a bale trailer from Whites trailers in Longford, and they might actually have second hand one's. Worth ringing up and sounding them out Declan.
We have used a 12 ton dump trailer behind our 4240XL. If conditions were a bit sticky or there were hills then you wouldn't want to bring a full load. Those trailers typically weigh 3.5 tons, so you're talking more than 15.5 tons behind a tractor that weighs just 3.5 tons! Also with 2 long rams the tractor can run out of oil when tipping unless it's overfilled.
Are you lifting the lift the extra bit by using the draft control
Great repiar vdeo Dec! Cheers to your local tyre shop for helping you out. Must be a big relief getting the pick up hitch in working order after all this time, and ready to use on the dump trailer.
Hitch lever should not be stiff. You have to lift both levers up into constant pump b4 you can release
No need for a extra long handle, lift the arms right up and if the hooks still aren’t loose then adjust the hitch lift arms
Great job dec , just bought a case 4240 XL and I see I have a hydraulic leak in back end just over where you fixed pick up hitch and user a little oil at blow pipe when I start any quick solutions here. Is there any where I can get manual for this tractor thanks Dec
on e bay, but they ask bloody prices
Farmer Phil got a bale trailer from Whites trailers in Longford, and they might actually have second hand one's. Worth ringing up and sounding them out Declan.
Did u get your fence post down
Your new pickup hitch lever is the perfect position for the loader joystick
Proper job!
Hi lad you need to pull your lift lever up the full way plus your draft lever the full way to release the hitch
ive the whole engine rip out of mine geting it recondition would i want to do the raditor and i have the same problem with my hitch
Great video dec some good maintenance done there keep it up
Salvage Workshop covers the distributor and such with plastic then sprays it with Easy Off Oven cleaner before power washing.
looks like an ordinary bicycle handle would fit, lookimg a bit more proffesional than gaffer😂
Nice repair job keep them coming stay safe 👍👍🏴🏴🇬🇧🇬🇧👌👌🚜👩🌾👩🌾
I said it before and I'll say it again Declan, you're a very handy man. 🖒👏👏👏
Those jack handles sure like to disappear 😉😂. Nice to have a fully workable machine 👍🏻. We never see those hitches in the US...
Would u buy a slurry tanker ?
u should buy an good impact there a bit dear but well worth it
what size dump trailer would she pull?
We have used a 12 ton dump trailer behind our 4240XL. If conditions were a bit sticky or there were hills then you wouldn't want to bring a full load. Those trailers typically weigh 3.5 tons, so you're talking more than 15.5 tons behind a tractor that weighs just 3.5 tons! Also with 2 long rams the tractor can run out of oil when tipping unless it's overfilled.
nice job...hit that like
Your good with welder get welder out and make set axle stands
Good video
I must send u a picture of the right one That pipe will brake you up in the tractor 😂
Well
Thank McGraw Tires from California.
I’d love to be this handy at things but I never had those skills. My Dad and brother are way better than me at these jobs.
Its a grand tractor