The April Fools Saga Continues - Replacing Hydraulic Oil & Filter on CASE 4230
Вставка
- Опубліковано 4 вер 2024
- Call Ciaran Young for more info! 086 323 7415
/ hireagri.rathcabbin
Hire-Agri are based in Rathcabbin, Co Tipperary..
5 miles from Birr,
8 miles from Portumna,
8 miles from Borrisokane...
We hire out the following farm machinery.. (Attach the following machines to your own tractor). 3 meter Disc Harrows, (Delivery Available on Disc Harrow’s),, 28ft Bale Trailers,,14 ton Dump Trailers,, Grass Wilter/Wuffler,, Log Splitter on Wheels,, 2600 Gallon Slurry Tanker,, Tri Axle Flat Bed Trailer/Car Transporter,,Post Driver (420kg hammer),, Small Square Bale Wrapper, (plastic supplied)
Oh dear. You're a far more patient man than me Declan. I'd have used some expressive language when the pipe didn't fit. 😂😂😂😂
The hydraulic oil that you took out of the back end looked very good I've seen a lot worse, I'd say it was changed not long ago
Use the same 2 spools that is connected to the 1 lever in cab flow and return dont use a different return used by another lever, it has to be the same 2 connected 2 your lever in cab for it work just leave it in pump in cab this will work
Ye haf te have unrestricted return for the oil going back in to the back axle--- like a fitting connecting to your drain plug
The backend on those takes high trans oil. That oil looked a bit thick.
That gasp at the end of the video is about the harshest word I've ever heard you utter. Looking forward to tomorrow's video!
Get yourself some cheap disposable gloves mate,,hydraulic oil isn't good for the skin,,or any oil for that matter..
Great video. 💯👍
I know it might be gone back - but just for now take off all the connection fitting s off the return pipe and see if it'll fit in through the back axle filler cap -- tie it up well with wire or strong cable ties -- it'll jump around a lot -- that should get ye going for now
Why not put it on the 290
nice job there bud..liked for ya
Put it on 290
Good video 👍👍🚜🚜🇬🇧🇬🇧👩🌾👩🌾🏴🏴👌👌
I told u last vido what was rong and u can't stick pipe into hole wher u up oil in u can get fiting for that cap
Are the emptying bolt inch or mill.
hiow you got sorted, if not contact me
Jayas that's so annoying. Have you the 2 hydraulic lever s set right inside on the tractor.
Put it on the other tractor