Epic opening shot of the three knives and feriasium rod on the stump. Great video, I really like the fact that you state that in the past you had a bad experience with this steel. It shows that you are willing to keep checking out different heat treats and HRC levels to find what works. God bless you and your family.
Sweet knife for sure. I’m a fan of Nitro-V. You’re right about high hardness on Nitro-V making improving the performance. Levi does very good work.👊🔥🔥🔥🔥🔥🔥🔪🇺🇸
It’s crazy how a point or two in HRC can change the entire performance of a steel! I have had a lot of glassy Nitro-V. This stuff is super bitey though!!!! Thanks for watching F- I appreciate you brother!
Nitro V is a good steel, so is AEB-L which I would put in the same category. They both need to be run hard to get the most out of the steel. When done right they are impressive for the money. An interesting thing about many stainless steels is that when the are run hard they loose some stain resistance. I have seen this in several data sheets from the steel manufacturers specify this in their heat treating instructions. Apex Alchemy just did a very interesting hardness test on a new Pasific Salt in Magnacut. The result was in the high 59's which is way to soft. I bet it was a decision to run it at a lower hardness to maximize stain resistance sice it is in the Salt Series. I take care of my knives and don't care about stain resistance. A knife is a cutting tool, make it as good as possible for that purpose!
Exactly! 59 is WAY too soft. That’s gonna be a butter knife the moment you use it! You’re totally right about the higher HRC sometimes resulting in lack of stainless properties! I have been experiencing that. Doesn’t bother me at all though!
At one point during this video I actually brushed the palm of my hand over the screen of my laptop a few times, because I thought that there were ants running over it!!! There were no ants there, obviously, as the ants were running all over the stump you were working on in the video!! 🤣. Your testing videos are literally driving me Buggy, E!!!!! Hahahahaha!! Super interesting testing and analysis of Nitro V!!! Besides just putting it back in the kydex sheath covered in water and dirt, you could maybe leave the Otter submerged in random noxious fluids, chemicals and irritants overnight and try to force a Nitro V patina!! LOL. On the menu tonight?....Acetone and balsamic vinegar!!!! The Otter wants a vinegar bath!!! 😂. I bet you could force an epic rainbow patina!! That is seriously the most perfect camp knife that I've ever seen!!! Love it!!! Congrats on the Otter drop!!! Another awesome video, Erica!!!! ❤🧡
I own a bunch of knives in 14C28N and NITRO-V. Very similar to each other in performance. I have not needed to actually sharpen any of them yet. A touch-up on a steel kit all they've needed. I'm fairly sure that the knives I own are on the softer side 60 to 61 HRC. Good video, Erica. Thanks
To Otter or not to otter, that is the question .... (couldn't resist) Some times the term stainLESS should have been turned around to stainmore, as people think LESS means Not at all. Glad you saved your finger(s) from a bandage or supper glue. Good solid content as always
Epic opening shot of the three knives and feriasium rod on the stump. Great video, I really like the fact that you state that in the past you had a bad experience with this steel. It shows that you are willing to keep checking out different heat treats and HRC levels to find what works. God bless you and your family.
Oh absolutely! I want to give everything numerous chances. It’s only fair. Thanks so much. Bless up fam!🥰
Hi Ms E. Nice you keep trying different steels more than 1 and done. Thanks for the video.🇺🇲🔪🌲🔥
@@jasonaffeldt7838 thank you!!!🥰
The otter looks so badass, glad to hear that upping the heat treat made nitro v work even better!!! 😁
Thanks so much best!!!!!
Great video Erica! So pumped for these 🔥
I absolutely love mine!
you have helped to design a great knife
Thanks so much!!!
Sweet knife for sure. I’m a fan of Nitro-V. You’re right about high hardness on Nitro-V making improving the performance. Levi does very good work.👊🔥🔥🔥🔥🔥🔥🔪🇺🇸
It’s crazy how a point or two in HRC can change the entire performance of a steel! I have had a lot of glassy Nitro-V. This stuff is super bitey though!!!! Thanks for watching F- I appreciate you brother!
Kudos for my fave❤
You rock!
Nitro V is a good steel, so is AEB-L which I would put in the same category. They both need to be run hard to get the most out of the steel. When done right they are impressive for the money. An interesting thing about many stainless steels is that when the are run hard they loose some stain resistance. I have seen this in several data sheets from the steel manufacturers specify this in their heat treating instructions. Apex Alchemy just did a very interesting hardness test on a new Pasific Salt in Magnacut. The result was in the high 59's which is way to soft. I bet it was a decision to run it at a lower hardness to maximize stain resistance sice it is in the Salt Series. I take care of my knives and don't care about stain resistance. A knife is a cutting tool, make it as good as possible for that purpose!
Exactly! 59 is WAY too soft. That’s gonna be a butter knife the moment you use it! You’re totally right about the higher HRC sometimes resulting in lack of stainless properties! I have been experiencing that. Doesn’t bother me at all though!
Very cool! Have a great weekend, E!
Thanks so much D! Enjoy your weekend!
At one point during this video I actually brushed the palm of my hand over the screen of my laptop a few times, because I thought that there were ants running over it!!! There were no ants there, obviously, as the ants were running all over the stump you were working on in the video!! 🤣. Your testing videos are literally driving me Buggy, E!!!!! Hahahahaha!! Super interesting testing and analysis of Nitro V!!! Besides just putting it back in the kydex sheath covered in water and dirt, you could maybe leave the Otter submerged in random noxious fluids, chemicals and irritants overnight and try to force a Nitro V patina!! LOL. On the menu tonight?....Acetone and balsamic vinegar!!!! The Otter wants a vinegar bath!!! 😂. I bet you could force an epic rainbow patina!! That is seriously the most perfect camp knife that I've ever seen!!! Love it!!! Congrats on the Otter drop!!! Another awesome video, Erica!!!! ❤🧡
Jesse! Thanks so much for the kind words man!!!!
I own a bunch of knives in 14C28N and NITRO-V. Very similar to each other in performance. I have not needed to actually sharpen any of them yet. A touch-up on a steel kit all they've needed. I'm fairly sure that the knives I own are on the softer side 60 to 61 HRC. Good video, Erica. Thanks
Thanks so much for sharing man!
To Otter or not to otter, that is the question .... (couldn't resist)
Some times the term stainLESS should have been turned around to stainmore, as people think LESS means Not at all.
Glad you saved your finger(s) from a bandage or supper glue. Good solid content as always
Always great to see you Mike!
I thought it was snowing after the first batonning 😂 good sunday my friend wish my soft knives were more bity
Thanks so much for watching pal! I appreciate you!
So much shade I thought there was an eclipse
I mean I was trying to be fair and kind while being truthful! 🤣🥰
I had a custom nitro v blade.i snapped the tip easy.it was hard to sharpen.what is funny I I have aeb-l custom fixed and I love that steel.
Dang! That’s too bad. It definitely depends on geometry and heat treat! I’m sorry that happened to your knife. What a bummer!
You make cool stuff and GREAT videos!!! What is that ferro rod that was in your opening shots?
Thanks Bob! And it’s one my buddy made me
Super nice blades! That tiny one would make an awesome size EDC knife if they get the heat treat a little better!
Good stuff Erica!
I agree!!! Thanks man!!!
I’m thinking about getting the native 5 in magnacut or the benchmade 940 which do you think is the better buy.
What do you wanna use it for?
Everything I can basically, fishing everyday tasks cutting rope and a good work knife.
@@Sommertime22292 I mean they’re two totally different knives so you can’t really compare them!
Not sure if I’ll be a fan of having to choke up on the native
If you want the most out of the steel I would recommend you get the Native 5. If you want a fidgety knife get the 940.
Cottage heat treats really put production heat treating to shame. I’ve had AEB-L in the kitchen really impress me.
They’re totally different!