Can't we add Dynamic value of Super elevation which we designed and applied for an alignment already ? Because we will have to edit Superelevation values depending on site condition also (Where we will apply value less than the value from equation)
No. you can't. So you have to find alternative way to provide superelevation. You have to play smart with things you already have in civil3D. You can make style for design speed 50, 60, 70 and so on.
Can we add e% or super elevation rate in curve table if yes then what is expression for complete alignment ? If my design speed will be 100km/hr or radius will be greater then 200
Super elevation only need to show normal crown, level crown, reverse crown and full super elevation location. If you want cross slope at 10m interval you need to extract corridor report. Otherwise you need to label it.
Sir, I want to draw a curve with the distance between the transition curve and the circular curve as I need, is it possible? Please make a video if possible.
@@Civil3DProTipsandTrickssir Deflation angle 29d32m39s R=1116.666m (1,567°) T.L.=294,455m C.L.=575.802m Trans=130m Shift=630mm I want to draw a curve according to this measurement.
Thanks so much. I had watched this video and my problem has been solved of superelevation.
THANK YOU, but can you export the point of intresection data into a table??
Awesome lecture 👌
Can't we add Dynamic value of Super elevation which we designed and applied for an alignment already ? Because we will have to edit Superelevation values depending on site condition also (Where we will apply value less than the value from equation)
No. you can't. So you have to find alternative way to provide superelevation. You have to play smart with things you already have in civil3D. You can make style for design speed 50, 60, 70 and so on.
I am using Civil 3D for railway projects, I need a curve delta angle with a spiral. Can you please help me with this?
Can we add e% or super elevation rate in curve table if yes then what is expression for complete alignment ? If my design speed will be 100km/hr or radius will be greater then 200
Rate of change is already there in super elevation band. You don't need to add them. Its depend on length of transition and super elevation.
Brilliant!
Thanks
But if I wanna to do show in curve band. Because I have seen many alignment where they show elevation in curve block
how to make curve label -delta angle with transition.
May I get the style set?
Please teach DMRB and AASHTO Design standards using civil 3D.
Thank you
You're welcome
How can i get super-elevation @10 m interval
Super elevation only need to show normal crown, level crown, reverse crown and full super elevation location. If you want cross slope at 10m interval you need to extract corridor report. Otherwise you need to label it.
How to add HIP/curve no. 1 ,2 ,3 .....
Sir,
I want to draw a curve with the distance between the transition curve and the circular curve as I need, is it possible? Please make a video if possible.
Don't understand your question. Are you asking for compound curve ?
@@Civil3DProTipsandTrickssir Deflation angle 29d32m39s R=1116.666m (1,567°) T.L.=294,455m
C.L.=575.802m
Trans=130m
Shift=630mm
I want to draw a curve according to this measurement.
Can you please share the template for style set
Low Quality Video