Captain Leon's Best Boating Mods and Accessories

Поділитися
Вставка
  • Опубліковано 16 гру 2024

КОМЕНТАРІ • 105

  • @ioneill9440
    @ioneill9440 3 роки тому +3

    Leon, cannot get over how CLEAN your boat is - looks better than the day it rolled out of the factory after eight years somehow. Your attention to detail is awe inspiring. Love your videos and have done some of your mods already.
    Happy boating!

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  3 роки тому

      Hey Neill, thanks so much for the compliments! I boat exclusively in Salt Water so yeah, I put my time into cleaning and care. Thanks so much for watching, appreciate all the comments, thanks!

  • @kennosek6926
    @kennosek6926 3 роки тому +6

    We need some Capt. Leon swag!!!

  • @Rob-Oh
    @Rob-Oh 3 роки тому +2

    Must be having some great weather back east!

  • @squeaky61
    @squeaky61 3 роки тому +1

    Nice to see another boat Post! Shame we have to wait till spring for more. Thank you!

  • @buck9739
    @buck9739 Рік тому +1

    Thx man I needed some ideas. I appreciate it.

  • @boatingpropless
    @boatingpropless 3 роки тому +1

    Fantastic video Captain Leon! Thanks for the shout out! I’m going to be looking into those fender holders!!

  • @hey1steve1
    @hey1steve1 3 роки тому +1

    Great video Capt Leon. Thinking about purchasing a Yamaha for the 2022 season and running it around in the GSB. Glad to know the boats are holding up to salt water after 8 years. Will revisit your videos if/when I get the boat for tips and tricks.

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  3 роки тому +1

      Happy to answer any questions you may have Steven. Good luck. Most Yamaha owners love their boats, myself included.

  • @danaberman6929
    @danaberman6929 2 роки тому

    We just purchased a 23 Yamaha 195S jet boat. I look forward to adding some of the nice mods that you have installed on your boat. Great video. The first mod will be the bumper holders. Thanks for the info.

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  2 роки тому +1

      Congrats Dana!! All the best with your beautiful boat. Take a look at my other videos for helpful maintenance information as well. Safe boating!

    • @danaberman6929
      @danaberman6929 2 роки тому

      @@CaptainLeonsBoatingandMore Sure will. Thanks again.

  • @ariel_monzon
    @ariel_monzon 3 роки тому +1

    The fender locks and second door are awesome take aways for me. Appreciate the idea!!!

  • @alexhendrickson6124
    @alexhendrickson6124 3 роки тому +1

    Great video! I’ve followed all of your mods and added them to my 2015 AR195. I recommend adding a gas strut to your glovebox!

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  3 роки тому

      Alex! Great idea. Could you get me some pictures or a link to what you used? Thanks for watching!

  • @stefanstout8369
    @stefanstout8369 Рік тому

    Thanks for the time put into the video. Good flow. Straightforward!

  • @mikescardino4431
    @mikescardino4431 3 роки тому +3

    As always comprehensive and informative video. Some really good ideas.

  • @mikemessana6268
    @mikemessana6268 3 роки тому +1

    So many mods! I love it!!! Another great video Leon! Hull Huggers are a great idea!

  • @Dan-qk4ns
    @Dan-qk4ns Рік тому

    What a Great video! Bought my first Yamaha and going to adopt alot of these ideas....thank you!

  • @nike12000haha
    @nike12000haha 3 місяці тому

    I feel so dumb never thought to make a hull hugger like that great idea!

  • @jeffz724
    @jeffz724 2 роки тому +1

    Great ideas here for my boat. Where did you find the stainless steel brackets which hold the boat hook?

  • @sunsetatshabooms4558
    @sunsetatshabooms4558 Рік тому

    Finally a boat accessories video that was helpful. The greatest addition we have added to our boat is a hot logic. It plugs into the ciggarete lighter adapter & we are able to enjoy hot food on our boat. Our issue now is keeping our interior free from mold stains. Any tips?

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  Рік тому +1

      Perhaps keep the boat well ventilated? Does your cover have sufficient air vents?

    • @sunsetatshabooms4558
      @sunsetatshabooms4558 Рік тому

      @CaptainLeonsBoatingandMore hmm no vents but its just a tarp & it's not on tight(wind picks it up a little)

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  Рік тому +1

      @@sunsetatshabooms4558 tarps hold moisture, look for a vented cover. Just my opinion.

  • @tomprice3686
    @tomprice3686 2 роки тому

    Great Video! Enjoy seeing all your mods. Where did you get the bow light? Can you share the link? Also can you link the video to your helm modification? Thanks!

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  2 роки тому +1

      It's an Attwood light. This seems to be the new version, it may require some modification to the mounting holes: www.amazon.com/attwood-Bi-Color-Mount-Navigation-Stainless/dp/B0767KDTC1/ref=sr_1_5?crid=2TM1DCCTJO0K8&keywords=Attwood%2Bbow%2Blight&qid=1661818971&sprefix=attwood%2Bbow%2Blight%2Caps%2C89&sr=8-5&th=1
      Link to other video: ua-cam.com/video/GgjjiNDtFNo/v-deo.html

    • @tomprice3686
      @tomprice3686 2 роки тому

      Thanks!

  • @paulrowan859
    @paulrowan859 2 роки тому

    Love the videos. Thanks for taking the time to put these together. I have an AR195 to be picked up in the spring. I’m in NYS too, but in the Finger Lakes area. Can’t wait to get out. I like those fender locks. I don’t know if I can bring myself to drill into the boat though.

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  2 роки тому

      Hey Paul, thanks for watching and congrats on the boat. I know what you mean about drilling. As long as you measure, inspect and be certain before you drill, it should all come out fine. Also remember that fiberglass is easily fixable. Professionals can make it look like you never drilled. Good luck.

    • @paulrowan859
      @paulrowan859 2 роки тому

      @@CaptainLeonsBoatingandMore Good point. I’m sure I will end up putting them in, but brand new the boat is so pristine, I will probably give it a year or two before I start doing surgery.

  • @jeffrosen4260
    @jeffrosen4260 2 роки тому

    Capt Leon- I have a 2016 yamaha 242 limited e and was wondering if you have a video of how to replace the reverse cable or directional control cable. Thank you.

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  2 роки тому

      Hey Jeff, I’m sorry I don’t. Most of my videos are generated as a result of need involving my own boat. Thankfully, I haven’t had that need yet, LOL. Wish I could help, and thanks for watching!

    • @jeffrosen4260
      @jeffrosen4260 2 роки тому

      @@CaptainLeonsBoatingandMore would you know the bolt size or what I need to remove the 4 bolts to clean out the props? Thank you

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  2 роки тому

      @@jeffrosen4260 if you mean, how do you service the jet pump, then this will help: ua-cam.com/video/YDIGz1VXLls/v-deo.html

  • @tonyreid2178
    @tonyreid2178 2 роки тому

    Have watched many of your videos and in one you mention the rod/cup holders and I've searched but cannot find it. Could you please tell me the holders you used. I'm pretty sure they are 15 degrees. Did you install them in the rear seating area or the rear swim deck? Thanks for the help and keep the great videos coming

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  2 роки тому

      Tony, the video you are commenting on is one of the videos with the information you are seeking. Watch it and you will see. Yes 15 degrees, I have 4 of them, all by Mateseries. Happy to answer any further questions, and thanks for watching.

    • @tonyreid2178
      @tonyreid2178 2 роки тому

      @@CaptainLeonsBoatingandMore Thinking of installing in the rear seating area, are there any drain hoses or do they just drain into the bilge area

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  2 роки тому

      @@tonyreid2178 I just drain into the bilge, but do my best to keep water going in there.

  • @squeaky61
    @squeaky61 3 роки тому

    I just watched the sea deck video. I hope you tackle it, would love to see your video of it!

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  3 роки тому +1

      Thanks squeaky, appreciate the compliment. Boating Propless does great work, I'm a big fan of his videos such as the Sea Dek one I linked.

  • @mehdikabbage278
    @mehdikabbage278 2 роки тому

    Fantastic video Capt Leon! Thank you for sharing. I am yet to receive my sx190, I was told early spring, but I look forward to installing some of these mods. Could you please share the part number/link for your Stoltz roller? Many thanks.

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  2 роки тому

      Sorry Mehdi, I'm not of the model number. I would wait until you get your boat, then measure it and compare it to what Stolz has to offer. Congrats on your new purchase, and thanks for watching!!

  • @carlcarl9290
    @carlcarl9290 Рік тому

    Great video it helped me in a good way. Thank you

  • @josephdecker4558
    @josephdecker4558 2 роки тому

    Hi Capt. I finally pulled the trigger and ordered a 2023 SX190. I 've watched all of your videos, and I have a few questions. What cover do you use for your boat? Do you trailer with it on? During the boating season when not using the boat do you put the cover on. Your advise, information is appreciated.

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  2 роки тому +1

      Hey Joseph, wow a 2023! You must be super excited. I still love my 190 as much as the day I got it. Now to your good questions. I use the Yamaha black deluxe mooring cover on the boat for all times when the boat is not in use during the summer. When we trailer to the ramp we leave the cover at home. After washing the boat from our saltwater use I reinstall the cover. In the winter I use the white felt backed transport cover that the boat came from the factory with. Make sure your dealer gives that to you, some discard it. Hope that helps, congrats!!

    • @josephdecker4558
      @josephdecker4558 2 роки тому

      @@CaptainLeonsBoatingandMore Thank you, for the reply.

  • @johnprice9271
    @johnprice9271 2 роки тому

    Great video Captain! Question- what tire mounting system are you using on your trailer for your spare tire?

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  2 роки тому

      I believe this is what I have, with the smaller boat and trailer I needed the spare to be angled away from hull. Thanks for compliments and thanks for watching! www.amazon.com/Extreme-Max-3001-0064-Mount-Carrier/dp/B001AXKOCA/ref=sr_1_5?crid=1BWCO3R6UPKIP&keywords=angled+spare+tire+carrier&qid=1649021433&sprefix=angled+spare+tire+carrier%2Caps%2C81&sr=8-5

  • @Rdgl1800
    @Rdgl1800 2 роки тому

    So your transducer has side imaging doesnt your motor get in the way or were you able to mount far enough away so it doesnt. I had to get a second transducer and put one on each side in order to get mine to work. I have a 2017 fsh 190 so my motor may be a little different then yours. Also K&N filter, been looking for one but cant find it.

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  2 роки тому

      So the jet pump does not interfere. I get a decent side scan image. The 190 FSH has a slightly different hull design but the jet pump is quite similar. Thanks for watching!

  • @squishes_1237
    @squishes_1237 Рік тому

    Capt. Leon. I can’t find link for the nav light. Can you share which one you used? Yamaha sent me one for my 2013 212x but it doesn’t fit. Thanks

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  Рік тому

      Paulie, I purchased an Attwood model similar to this. They keep changing designs and even I had to drill an additional hole to get it to fit, so don't expect it to be an exact replacement for the factory one: a.co/d/53aWj5n

  • @madelynmedina-nunez5528
    @madelynmedina-nunez5528 Рік тому

    Good morning Captain is it possible to keep the Yamaha jet boat in the water all season long Mid-Hudson valley

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  Рік тому +1

      It's possible, whether it's good for the boat is another thing...lol. Growth begins to grow on the bottom of boat while it is in the water. If it's salt water this growth can be extensive including barnacles, but fresh water causes growth too. You can bottom paint a hull to avoid this, but the issue is the intake grate, impeller and the rest of the jet pump. These components need a smooth flow of water without restriction, growth can really gum up the works. Do an experiment by pulling the boat after 2-3 days and checking it for problems, if all is well try it for longer periods. Always remember your bilge should be on and powered up sensing for infiltration of water anytime the boat is in the water.

  • @Michal_Lempicki_funchannel
    @Michal_Lempicki_funchannel 3 роки тому +1

    Hey Capt! I'm looking at upgrading wheels on the trailer to my 2019 SX195. I'm also mostly salt water. Anything special you took into consideration when you purchased yours?

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  3 роки тому

      Well they said the best for salt water use is the ugly galvanized wheels, but I really wanted something nicer. I went with aluminum and decided to take my chances. I hit them with spray wax now and then for protection. After one complete season they are still perfect. I would just avoid steel wheels. Make sure to watch my video covering the radial tires and wheels install.

  • @epsmith19
    @epsmith19 2 роки тому

    Capt. Leon, do you ever troll when using the combo rod holder/cup holders in the stern?

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  2 роки тому +2

      Yes, the Bluefish on the swim deck at 12:28 was caught by trolling. I have also used the cup/rod holders behind the captains seats for trolling too, which may be more secure and more accessible with a fish on.

  • @epsmith19
    @epsmith19 2 роки тому

    Captn Leon. How often or ever do you wish you had the 195 vs 190? I'm not obsessed w top speed like some guys are but I'm worried the 190 will struggle pulling the kids or w a full load. Thanks!

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  2 роки тому +1

      Hey Eric, I'm in my 9th season with my 190 and I never wished I had the 195. I will say we have pulled a tuber with 4 or 5 people on the boat with no problem. I also routinely hit 43-44 mph. Like you I'm not a speed demon. If you're going to always have a packed boat and always looking to do water sports then maybe the 195 is better, just not for me. Factor in the fuel burn, on Boattest.com they indicate its like 70% more fuel used in the195 at WOT. Wait it gets worse, the greater fuel burn is also at 93 octane vs. the 87 octane of the 190. Many will tell you the 195 is the way to go, and the newer hull design from 2019 on is a bit slower, but for me, my 2014 190 is just perfect.

  • @waltersoares1913
    @waltersoares1913 3 роки тому +1

    YAMAHA THRUST VECTOR hey captain could you let me know which part works on the jet boat Yamaha SX 190 2017?

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  3 роки тому +1

      Hey Walter, I'm going to refer this question to Will Owen of Jet Boat Pilot. He would know best, perhaps he will comment in this thread shortly.

    • @waltersoares1913
      @waltersoares1913 3 роки тому

      Thks

    • @JetBoatPilot
      @JetBoatPilot 3 роки тому

      Thrust Vector will help tremendously with low speed control and maneuverability while moving forward. Lateral Thruster will help just as much while moving in reverse.

    • @waltersoares1913
      @waltersoares1913 3 роки тому

      @@CaptainLeonsBoatingandMore thank you so much

  • @andysangels1970
    @andysangels1970 5 місяців тому

    You register your boat with the dmv in New York? That’s crazy

  • @johnsenese6002
    @johnsenese6002 2 роки тому

    Great video. One word of caution, be sure not to over oil that k&n it can cause issues in the intake.

  • @waltersoares1913
    @waltersoares1913 3 роки тому

    hey captain could you let me know which part works on the jet boat Yamaha SX 190 2017?
    YAMAHA THRUST VECTOR

  • @codacoda565
    @codacoda565 3 роки тому +1

    Any thoughts on how to stop the high db sound level from engine

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  3 роки тому

      Of course folks have tried using sound dampening material in the engine bay, but its a high revving engine so you're not going to make it silent. I personally have not had any issue with the sound level, we don't run WOT all day long.

  • @tonyreid2178
    @tonyreid2178 2 роки тому

    What size and brand are your black fenders? I assume you find them best for your boat size and shape.

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  2 роки тому

      I have white fenders, not sure if that was a typo. They are the basic fenders for most small boats, maybe 2 feet long or so at any marine store, nothing special. Thanks fo watching!

  • @chadhuffman5270
    @chadhuffman5270 3 місяці тому

    Captain Leon - me again. I have a 2015 AR190 Shorlander single axle. I have 335 lbs on the tongue weight. is this too much or too little?

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  3 місяці тому

      Hi Chad, that boat weighs close to 2500-3000 lbs. loaded. Tongue weight should be between 250-300lbs. You are fine where you are, it's close. If you slide the winch stand back an inch on the trailer tongue you will lesson tongue weight if you feel you must.

  • @prosurfer92
    @prosurfer92 3 роки тому

    Can you explain or do a video of how you wired your fishfinder/chartplotter for its power supply as well as your wireless cell phone charger? Thanks a lot! That is the next upgrade that I want to do on my 2013 AR190.

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  3 роки тому

      Hey Prosurfer, with the boat put away for winter, can't do a video on it right now. I can tell you however that I removed the panels holding the switches and located a 12v wire. From there I just tapped into it. Years ago I did a write up on it in the Yamaha Jet Boat forum. Here is the link: yamahajetboaters.com/forum/viewtopic.php?f=1&t=62631&hilit=+part+1

    • @prosurfer92
      @prosurfer92 3 роки тому

      @@CaptainLeonsBoatingandMore perfect, thank you. I actually have the wireless cell phone charger already installed on my boat, I simply put the ends of the charger wires into the free triangular plug that just sits back there. I figured you possibly did the same for your fishfinder. I wonder if you can purchase the other end of that triangular plug and attach that to the fishfinder wiring for a cleaner install, rather than having to tap into the wires directly... so just to clarify, you used the wire taps to connect both the fishfinder and the cell phone charger to the free triangular plug?

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  3 роки тому

      @@prosurfer92 I think the triangular plug may have been for diagnostic testing. I think I only used it for the Lowrance. I believe I tapped into a different 12 volt lead for the phone charger. Did you watch this video linked covering the phone charger install?

    • @prosurfer92
      @prosurfer92 3 роки тому

      @@CaptainLeonsBoatingandMore video linked phone charger install?

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  3 роки тому

      @@prosurfer92 yes, all the related videos are linked in the description of this video we are now commenting on.

  • @JEEPIMPACT
    @JEEPIMPACT 2 роки тому

    Awesome mods🎉😮😊 great vid

  • @jakerubin6453
    @jakerubin6453 3 роки тому

    What size/model is the replacement led bulb?

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  3 роки тому

      Sorry Jake, I looked but couldn't find the invoice for it. Pull your factory bulb and take a measurement. Wish I could help more, thanks for watching.

  • @refitsandrenovations1725
    @refitsandrenovations1725 2 роки тому

    We would love to partner with you Captain Leon!! Let us sponsor your next refit or renovation!!

  • @hookedonboating4750
    @hookedonboating4750 2 роки тому

    Nice video, we have a lot of the same ideas, except I don't fish. Not that there's anything wrong with fishing.......😃

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  2 роки тому

      Thanks, I hear ya. But here in NY fishing extends my season by a few months. When its too cold to BBQ at the sandbar, I keep on fishing!

    • @hookedonboating4750
      @hookedonboating4750 2 роки тому

      @@CaptainLeonsBoatingandMore Sounds good. Wish we had your water here in STL. Here on the Mississippi River the fish jump out of the water in to your boat..🤣 Like I said, we have alot of the samee ideas,. I have a similar video about mods on my channel. Actually I have one for inside and one for outside of the boat. Here is the inside. ua-cam.com/video/sDVtDVbz-l8/v-deo.html

  • @chunlimon7862
    @chunlimon7862 Рік тому

    Love it thx

  • @stefanstout8369
    @stefanstout8369 Рік тому

    At 2 nautical miles the curvature of the earth renders a light 30” over the water useless.

  • @GIJeaux1
    @GIJeaux1 2 місяці тому

    Take your spare off, turn it around, remount the spare, and install the tire cover. Just sayin'...

    • @CaptainLeonsBoatingandMore
      @CaptainLeonsBoatingandMore  2 місяці тому +1

      Nah, the mount fits within the backside of the rim where it's concave. If I reverse the wheel the tire will be protruding out further from the trailer. Good thought though.