2013 Mercedes Benz C300 How to remove radio display install apple carplay android auto Netflix 12.3"

Поділитися
Вставка
  • Опубліковано 16 лис 2023
  • 2013 Mercedes Benz C300, Remove panel under cluster and top,remove panels on side of the display, remove two screws,pull bazel off the cluster, disconnect two plugs (power plug will not be used)remove center trim,loose two screws then push down to release the radio,unplug the main harness then remove the fiberoptic cable, install fiberoptic to the harness then plug back in, run harness to the top, remove the display then reinstall the bazel, display comes with plastic mount for the carplay display, run aux under armrest for audio,goto settings to enable the reverse camera and aux,go to factory radio then choose aux under audio source for the sound for new monitor, we had to remove the switch panel to bring down the harness to make the radio go back in place

КОМЕНТАРІ • 11

  • @TonyPerez-xq8hc
    @TonyPerez-xq8hc 6 місяців тому +3

    great video nice that someone shows step by step

    • @goautosound1
      @goautosound1  6 місяців тому +1

      Thank you for your support

  • @julie8545
    @julie8545 4 місяці тому +1

    GREAT WORK

  • @user-ju6fv7vc4l
    @user-ju6fv7vc4l 6 місяців тому +2

    Great work as always

  • @ricardomondestin8724
    @ricardomondestin8724 Місяць тому

    Had the same problem this afternoon, I had to quit for the moment.
    When you removed the switch panel, to get access to the 2 screws of the Ac Controller than removed it to press wire down
    What do you do first after?
    Do you push the radio back in?
    Than Ac controller?
    If so will you be able to screw (4screws) the switch panel with the radio already push in?

    • @goautosound1
      @goautosound1  Місяць тому +1

      Yes, we did have a hard time putting all screws back in place . You have to have someone help you to pull and screws back in place

  • @polishpaul
    @polishpaul 2 місяці тому

    I’m trying to help a friend with the touch screen not playing sound. How is the connection made? Is the touchscreen audio out via aux? And are you feeding that back to the head unit? Can you explain in detail how that is connected?

    • @goautosound1
      @goautosound1  2 місяці тому

      You need to have an aux cable connected in the glove box like video
      Please watch the video from beginning to end it tells you what we did and how to get audio from screen

  • @dimitripatrianakos5100
    @dimitripatrianakos5100 6 місяців тому +2

    Where can I buy the screen?

    • @goautosound1
      @goautosound1  6 місяців тому +1

      Customer purchased from Amazon