@@TotallyNoAim 3D printers usually make some degree of noise when operating, but it varies depending on the waveform generated by the motor controllers. I find it hard to believe he could eliminate that noise entirely.
@@janvrabec3401 not really... It's art that became a product... If they can sell it for that at their scale, it's better IMO than scaling up and outsourcing manufacturing.
It's not 5 grand. I recall looking at them. I think they were 500 to 800 depending on size. If you wanted a HUUGE one then maybe it would approach multiple thousands. But one the size he made would be a few hundred dollars if I remember correctly
Maaaan it would be sooo fucking cool to somehow integrate that into a digital clock! Like, it changes with the time, probably in 5 minutes intervals, and have that as a coffee table.
@@SoulDelSol could probably work as a regular digital bar number type, just takes some programming and effort is all, though i wouldn't know how yo programme it, i can see how it could be done
I prefer being an engineer than a god. Much less false info circling around 'bout you and nobody will harm ppl in ur name, much safer. Whatever the god is im very sorry for him lol
@@turtleking2108 yeah but that's putting money into rich guys pocket. shit like this should be open source. it's a marble moving on sand. not a cure to climate change
The price is defiantly up there, but can understand why. I sat next to one of them at old workplace a lot, it was memorizing, well built, and art. Probably one of the earliest versions, looks like they gotten fancier since. The artist of the tables is the dad of the CEO of the company I worked for then. But imo it's also good people are making lower cost versions of this concept for accessibility reasons. Artists gets paid for quality work, but others can have one also who can't pay the high cost.
@@hefoxed I understand the pricetag, the quality of the craftsmanship and how cool the concept is are undeniable. Of course I'm not the target client for them, but I would probably choose to buy that beautiful table over jewelery or Loui Vuitton bags that I dont care about.
I was really confused up until you started disassembling the 3D printer itself to use in the build So if that was the goal well done, 10/10, had me guessing the whole time, best movie of the year, bravo
a visitor? indeed, i have slept long enough. my table has long since forgotten its tablecloth, and i am EAGER to make it remember. however, some coffee stains its cloth, and i must admit, i'm curious if he'll notice.
you should try using a polar coordinate gantry instead of xy, would give more coverage, require less materials, and be more efficient for circular motions.
I think if I were gonna build one, I would have one axis be angle and the other be distance from center. Still 2 axis but should be simpler construction and less dead zone caused by the square work area of the 3d printer frame.
I'd cover the top with glass and have a real cool table
Thats what he did
The only downside would be the amount of noise it produces.
@@jamescollins6085 it makes no noise
@@TotallyNoAim 3D printers usually make some degree of noise when operating, but it varies depending on the waveform generated by the motor controllers. I find it hard to believe he could eliminate that noise entirely.
@@jamescollins6085 the motors when doing 0 stepping make no noise
Ahh I see a fellow man who wanted a Sisyphus Table but didn’t wanna pay 5 grand
Their price is scam...
@@janvrabec3401 not really... It's art that became a product... If they can sell it for that at their scale, it's better IMO than scaling up and outsourcing manufacturing.
It's not 5 grand. I recall looking at them. I think they were 500 to 800 depending on size. If you wanted a HUUGE one then maybe it would approach multiple thousands. But one the size he made would be a few hundred dollars if I remember correctly
@@SoulDelSol the cheapest for a side table is like 1,400. The cheapest product they have is like 600 and is for a small 14" table top version.
Jesus loves you alot trust in His death 4 salvation and be saved from eternal hell
"what is my purpose?"
"you move a metal ball in the sand for hours"
oh my god
Welcome to the club
Guess it's better than butter. 🤷♀️
Lol gold reference
@@ashh4929not really
“This will hurt”
Prime, Sisyphus.
I can't look at the word Sisyphus without hearing "Keep Them Coming!"
DESTROY
(cue sand mixed with gunpowder)
I seen sisyphus and immediatly thought of ULTRAKILL goddamnit
“KEEP EM COMING”
I love the amount of ultrakill players coming out of the woodwork to quote Sisyphus prime
Keep them coming!
This table…
To hold ME?
Exactly what I was thinking 💀
“This will hurt!”
this table… TO HOLD ME?
Hes literally sisyphus
Maaaan it would be sooo fucking cool to somehow integrate that into a digital clock! Like, it changes with the time, probably in 5 minutes intervals, and have that as a coffee table.
It changes very slowly. It's always moving and takes a really long time to change whole surface. This is obviously sped way up
@@SoulDelSol yeah i know, thats why i said in 5 minutes intervals, to give it time to change
@@crossingplays2155 oh I get it, you mean to display actual time? It'd have to be written in cursive
@@SoulDelSol could probably work as a regular digital bar number type, just takes some programming and effort is all, though i wouldn't know how yo programme it, i can see how it could be done
@@crossingplays2155 Can you retype that message in English? I have no idea what you are saying.
I think people who know how things work in and out and how to literally make something from scratch or machine are literal gods bro
how old are you?
It’s really not as complicated as it seems. Programming, electronics and a bit of engineering. It’s more approachable than you’d think
I prefer being an engineer than a god. Much less false info circling around 'bout you and nobody will harm ppl in ur name, much safer.
Whatever the god is im very sorry for him lol
It’s honestly really easy to do engineering. I take bong rips and build robots 😂 physics and math is hard; not engineering.
This is the type of person who made the tools for us when we separated from other kinds of primates
What sisyphus does when he gets bored in the Flesh Panopticon
Ultrakill reference I see
Can you please share the build plan? This is too awesome!
You can buy these online
@@turtleking2108 maybe people want the experience of making it them self. Plus these tables are expensive
@@turtleking2108 and it costs a crap ton of money
@@turtleking2108 yeah but that's putting money into rich guys pocket. shit like this should be open source. it's a marble moving on sand. not a cure to climate change
@@orilio3311tbh often its more expensive to build it yourself, but building it yourself is arguably more fun for people that enjoy it.
The Sisyphus is a cool product but they made it to be a luxury item and the price is stupidly high, but for sure it's amazing.
The price is defiantly up there, but can understand why.
I sat next to one of them at old workplace a lot, it was memorizing, well built, and art. Probably one of the earliest versions, looks like they gotten fancier since. The artist of the tables is the dad of the CEO of the company I worked for then.
But imo it's also good people are making lower cost versions of this concept for accessibility reasons. Artists gets paid for quality work, but others can have one also who can't pay the high cost.
@@hefoxed I understand the pricetag, the quality of the craftsmanship and how cool the concept is are undeniable. Of course I'm not the target client for them, but I would probably choose to buy that beautiful table over jewelery or Loui Vuitton bags that I dont care about.
How loud is it when running?
@@BrentonSmiith It depends on the printer used. Could be really loud, could be relatively quiet.
Most higher end printers are quieter or silent, but the cheaper ones tend to be quite noisy.
It’s like an automated zen garden.
Imagine showing those zen garden patterns to a medieval Japanese monk, lol.
"Tending the garden will teach you peace, tranquility, harmony, and creativity, child."
"..."
"You are a fucking try hard, you know that?"
Those are actually really cool and intricate patterns, not like that other stuff that gets advertised.
You made a really cool art installation
Design one where you can draw with it, like a fancy Etch-a-Sketch
Interesting idea. Not sure if the firmware would be able to handle continuously being sent operations though. But I'm a novice so... 🤔
The music at the end reminded me strongly of Kahoot...
Nice table!
Keep 'em coming!
Flesh Panopticonussy
It’s so satisfying to watch patterns in the sand
I was really confused up until you started disassembling the 3D printer itself to use in the build
So if that was the goal well done, 10/10, had me guessing the whole time, best movie of the year, bravo
? It has the name of the product he's replicating right in the title. It's not supposed to be a surprise
I Love these. Maybe one day I’ll build one. Do you have a video about the patterns?
This should be an art installation at a museum
This reminds me of the swirls and patterns that you used to get with old music albums I used to watch them for hours 😂
" Beauty Is In The Eye Of The Beholder "
... what I see is beautiful
:)
I just woke up and read the title as syphyllis tablet😭
I kept reading it as "syphilis table".
I'm like, what is happening here? Haha
That is absolutely amazing 👏
I think it will be cool if you live stream it 24/7.
Passive income, set up a channel
The purple is the best one yet
Omg! A syphilis table!
This table… to hold… ME?
U-U-ULTRAKILL?
Ever since I saw the table I have wanted to make my own. Very cool. Looks great.
Your pattern designs are way more interesting than other ones I saw.
Chatting with friends, sipping coffee or tea while eating, while watching the next pattern take shape
I would be mesmerized
This is so mesmerizing to watch
a visitor? indeed, i have slept long enough. my table has long since forgotten its tablecloth, and i am EAGER to make it remember. however, some coffee stains its cloth, and i must admit, i'm curious if he'll notice.
This, will be noticeable
Incredible
Must we imagine the table is happy?
Dude that’s freaking awesome well done
I love that you specify the painting part. I love it, it's so satisfying.
That’s really cool!!!
you should try using a polar coordinate gantry instead of xy, would give more coverage, require less materials, and be more efficient for circular motions.
Sisyphus prime table REAL
You'll do fine as an appetizer
This looks like a great idea to do for a screensaver
I think if I were gonna build one, I would have one axis be angle and the other be distance from center.
Still 2 axis but should be simpler construction and less dead zone caused by the square work area of the 3d printer frame.
One of your greatest creations.
the last purple design is pretty awesome
the machines like, "What the f am I making?"
So cool Simon, you are an inspiration!
this is one really good syphilis machine
“One must imagine Sisyphus happy”
This might be the best thing I've seen on UA-cam in a very long time!!
That purple pattern was amazing
Syphilis looks cool, i want some!
This is awesome!
I want a syphilis table
That looks awesome!
😯
I wish I was this creative.
Zen garden for my balcony using one of these. 💡
That's absolutely awesome
I read the title as "How I Built a Syphilis Table," took me a second to properly process it...
Now make "Bad Apple" on it
Absolutely mesmerizing
That looks awesome! How do you generate the paths for the ball to follow?
This is incredible
Read it as "Sussybus table", started screaming emergency meeting.
I like the part where he shows us how he built the machine
You want him to make a whole ass tutorial in a UA-cam short?
My guy, this is utterly incredible
I love the original asmr vid on this its like one of my only downloaded vids on youtube
KEEP EM COMING
-Sissyphus Prime
I could watch these patterns for hours reminds me of when is stare at the weird effects when playing music on my old xp pc lol
That’s beautiful.
That's amazing...! I want one!
Great project. You should have linked to the full video to get people watching it
saw an article on this in DIYode the other month 👍 someone that makes 3D printer replacement parts is trying to start a trend
Brilliant stuff
Beautifully psychedelic. Seems high value
I'd watch this all day, you should put a glass top on it and you can use it as a nice living table
This is so cool.
This is awesome
Carpet companies within zen garden: shut up and get me your blueprints
The syphilis table
That's pretty cool
Bro is target #1 in a robot uprising
Weird how you didn't talk about how there is a steel ball spinning in perfect rectangle shaped formula
This plus frequency vibration is a revolutionary technology.
Good work.
This script has a shorter attention span than I do
That is mesmerizing
Can’t wait to find this at my local IKEA!
Dude WHAT you’re a freaking genius-
Very cool!
This is one of the sickest things I’ve seen!
Oh man this is so cool
Way different process than I imagined to make a syphilis table, but easier to watch for sure
Would be really cool if it used polar coordinates to cover the whole circle!
Now we're using 3d printers to produce 3D designers, wow.
Amazing idea..❤
Ah spirographs are so dang cool