Це відео не доступне.
Перепрошуємо.
RV Slideout Switch Variations
Вставка
- Опубліковано 2 кві 2018
- Copyright www.RV-Project.Com
In this video I look at a couple of identical looking but incompatible switches commonly used in RV slideout and awning applications.
Thank you SO much for this video. I just purchased a DRV and am installing the Lippert One Control, which it didn't come with...grrrrr, but was having issues with the Carefree Awning that was installed on the rig. The fuse on the controller kept blowing no matter what I did. I installed the relays as you indicated and the problem is SOLVED. Lippert One Control support was fantastic, but couldn't get hold of Carefree to save my life. Thank you again for putting this very professional video/solution together!
Thank you for your support of the channel.
My Jayco Eagle has the non standard switches. They originally were white and I wanted black ones. I ordered the right ones the first time but I didn't know there was 2 kinds till I saw this video. Good explanation.
Glad to help.
Thank you. I’m in my 3rd switch and wondering why my relay fuse is still clicking. I need the PWR switch and was using the +/- Also, I noticed one says P10 on the side and other says P11. PWR is P11. +/- is P10
I need to know where to find the parking switch
Can you provide the part numbers for both switches?
pdxrvwholesale.com/products/slide-out-extend-retract-switch-black-12395-2 without parking
See below
@@RVProject I can’t find these part numbers anywhere. All I order come in the “normally ground” configuration. I need normally open.
My brain needs to control alt delete when those charts come up 😂 I’m glitching
How annoying. I understand not wanting to design/manufacture a different connector but how are you supposed to know which one it is by looking at it?
That is why I put out the video.
RVProject
Yep, you're doing the good work for all mankind :)
Checking with an ohm meter one is normally open and one is normally closed