I dont know what to say man. You`re the absolute best to make these incredible awesome stop motions! And that is seriously the biggest hook block i`ve ever seen, you must have spend a lot of time on reeving that one. :D
Much enjoyed your stop-motion video, it added to my crane educational. The constant background noise l had to mute, try Wagner next time. Reading through the many comments, l'm amazed at the cost of these models and l'm much impressed with your fleet. Cheers.
Very well made and entertaining video, a lot more fluent than a real life video, and I think that keep us viewers watching till it ends. Years ago, I watched a video on TV about how they used to bring down big cranes from the top of skyscrapers in the 1930's after the job was completed, I've been looking, but I haven't been able to find it in UA-cam, If you kow where I can find it, I'd appreciate your help. Thanks for sharing.
That was a fantastic video, I worked for a crane co.as a trailer driver back in the late 60s' our big Crane was a 200 ton P&H truck crane that took about 20 loads to move it On a scale of 1 to 10 Video10+ Music -1 A couple of those cranes would look great model modle RR layout.
Lovely vid.I knew I had a great model when I purchased it plus the boom extension. Saw new full size cabin in shed at Mammoet before their lamented open days in Rotterdam came to end. NOW I have to find mine in the garage and actually assemble it at last ! Amazon Guy - crane nut.
its a liebherr lr1300, as for a starter, a good crawler crane would be a liebherr hs855 or a manitowoc 4100, a good truck crane would be a grove gmk 3055, or a terex rt130, or a terex ac100
Great job. Looks like alot of work to make this video and it was well worth it as for as I'm concerned. Keep it up, worth the watch more then once. : )
Give you alot of credit man. Wish all jobsites were that organized. Took the crew 4 reeaal days to put together my 1300. Awful conditions. Not the men's fault. Funny that you used it as assist rig. Haaa
Hey, its a great presentaion of the cc 8800! It's a amazing 'monster crawler'!! well i have at the moment the 'little' cc 3800 from the germain crane bilding 'baumann'. so......lift up. 🏗 😀 Frank 🦇
@spettacolo78 umm, they are really hard to find nowadays, i got this from ebay, but evot-usa or adm vintage might have them, they are pretty expensive now
I really enjoy your videos. Thanks for taking the time to make them. What type of camera/software do you use? I want to show my 5-year old how stop motion is done. I made a 3-minute film in 5th grade, but on 8mm film. I bet it is a lot easier nowadays. One suggestion: Invest in some lighting in order to stabilize the exposure and eliminate shadows. Keep them coming!
Efrain Gonzalez thanks, any still camera would work i think, i used a Nikon p500 i think. As for software, i used windows movie maker. I think you can use final cut pro but i havent tried it yet. The trick is the more photos you take with the smallest amount of movement, the smoother the video will be. Then you just edit all the stills to last a fraction of a second and it comes out as a video. Very time consuming to make. Which is why i havent made any recently. Don't have time like i use to
Very cool, I kind of wish I didn't see this, I don't need another expansive hobby. I never knew any of this stuff even existed. Looks like a lot of fun. "The only difference between men and little boys, is the price of their toys."
nice vid. 1 remark though, some of your arriving parts are divided in more pieces in real life. crawlers are two parts for example but very enjoyable to watch
This is an amazing video! Astonishing amount of work must have been done to do this. Thanks for sharing!
This has to be one of your best stop motion video's Brandon !!
2023 anyone?
I dont know what to say man. You`re the absolute best to make these incredible awesome stop motions! And that is seriously the biggest hook block i`ve ever seen, you must have spend a lot of time on reeving that one. :D
What a superb effort. I hope somebody from DeMag see's this.
Much enjoyed your stop-motion video, it added to my crane educational. The constant background noise l had to mute, try Wagner next time. Reading through the many comments, l'm amazed at the cost of these models and l'm much impressed with your fleet. Cheers.
I'm speechless, this video is amazing, congratulations...one of the best I have ever seen.
@312bcat Thanks, glad you like it
Very well made and entertaining video,
a lot more fluent than a real life video, and I think that keep us viewers watching till it ends.
Years ago, I watched a video on TV about how they used to bring down big cranes from the top of skyscrapers in the 1930's after the job was completed,
I've been looking, but I haven't been able to find it in UA-cam,
If you kow where I can find it, I'd appreciate your help. Thanks for sharing.
@Mitchcranes123 yes there is, i just havent gotten it yet
All I can say is WOOOOW!!!!! That was just awesome I have never seen anything like it great job..........
Really impressive! Can't wait to see this machine set up in Minneapolis.
We just put a brand new cc8800 together in TX City TX last month SWSL 78 and 60 she's a Beast! Twin boom going in in Louisiana!
Nice. that twin 8800 is insane
That was a fantastic video, I worked for a crane co.as a trailer driver back in the late 60s' our big Crane was a 200 ton P&H truck crane that took about 20 loads to move it
On a scale of 1 to 10 Video10+ Music -1
A couple of those cranes would look great model modle RR layout.
Lovely vid.I knew I had a great model when I purchased it plus the boom extension. Saw new full size cabin in shed at Mammoet before their lamented open days in Rotterdam came to end. NOW I have to find mine in the garage and actually assemble it at last !
Amazon Guy - crane nut.
@heavyhauler16 thanks, yes it is
A-W-E-S-O-M-E!!! All that work deffinetly paided off!
2010 YT was a simpler time, a nicer time
Getting better with the stop motion, nice crane beasts you have there! Nice
@bcmcustoms1 thanks! i paid 720 for it, but i got it from a collector, they are discontinued now and sell for 1,000$ and up
Really enjoyed this ...great bit of animation.
there are some screws underneath, i took it all apart
@sdjb111 thanks, glad you liked it
@328DLCR lol thanks, yeah it did
Dhs Diecast, Evot-USA, 3000toys
@plowman828 there are 90 weights on the entire crane!
Nice video.!! Congrat.. Good work with these models..!!! I'm portuguese, and i like your vídeos
very very cool crane, how much is it?
its a liebherr lr1300, as for a starter, a good crawler crane would be a liebherr hs855 or a manitowoc 4100, a good truck crane would be a grove gmk 3055, or a terex rt130, or a terex ac100
Great job. Looks like alot of work to make this video and it was well worth it as for as I'm concerned. Keep it up, worth the watch more then once. : )
where did you buy all those models of cranes
Awesome video, thanks, i use this crane CC8800 for stadium project,and can you tell me how to buy this mock up?
Give you alot of credit man. Wish all jobsites were that organized. Took the crew 4 reeaal days to put together my 1300. Awful conditions. Not the men's fault. Funny that you used it as assist rig. Haaa
@stegro84 thanks, no i didnt use any transition, just shortened the clip length and added them together
Incredible work, props to ya -keep sharing these videos
Hey,
its a great presentaion of the cc
8800!
It's a amazing 'monster crawler'!!
well i have at the moment the 'little' cc 3800 from the germain
crane bilding 'baumann'.
so......lift up. 🏗 😀
Frank 🦇
What scale is all this stuff
love how you did this video but you forgot the little worker guys
@CrazyNathaniel It was a fermentation tank
Where did you get all those awsome tower cranes in 1:50?
Buy them
How many do you have now?
which one is your highest crane ? with full extension kit and jib
Where i can buy this stuff
Please talk to me sir
How much cranes do you have?
@CrazyNathaniel Thanks, the weights are pretty heavy, I didn't want the video to take 10 minutes just to add the weights so I lifted a few at a time
do you have a ac200 if you do please do a review
@rollinlowford Thanks, you'll like it
nice video dude alot of work ha like when you use the crane without the tracks thas cool.
whats the total wight on that big boy
what model is the yellow crane? Also if anyone has any suggestions on a good starter crawler crane it would be good too.
@Coolrockndad thanks
You know it's a big crane when it takes another super crane to assemble it.
Astonishing video!
Di mana bisa beli barang seperti ini pak
I come from malaysia.. Where did you buy from ???
@spettacolo78 umm, they are really hard to find nowadays, i got this from ebay, but evot-usa or adm vintage might have them, they are pretty expensive now
yeah i know, but this is just a model, and not all the parts break down like the real thing. wish they did though
I really enjoy your videos. Thanks for taking the time to make them. What type of camera/software do you use? I want to show my 5-year old how stop motion is done. I made a 3-minute film in 5th grade, but on 8mm film. I bet it is a lot easier nowadays. One suggestion: Invest in some lighting in order to stabilize the exposure and eliminate shadows. Keep them coming!
Efrain Gonzalez thanks, any still camera would work i think, i used a Nikon p500 i think. As for software, i used windows movie maker. I think you can use final cut pro but i havent tried it yet. The trick is the more photos you take with the smallest amount of movement, the smoother the video will be. Then you just edit all the stills to last a fraction of a second and it comes out as a video. Very time consuming to make. Which is why i havent made any recently. Don't have time like i use to
Where did you buy from ?
Very cool, I kind of wish I didn't see this, I don't need another expansive hobby.
I never knew any of this stuff even existed.
Looks like a lot of fun.
"The only difference between men and little boys, is the price of their toys."
I will go see the giant crane when it's fully running,just live 15 miles away!
@CrazyNathaniel Yeah it is a very nice crane, not vey detailed like the manitowoc 18000 but pretty nice
since this video, ive gotten a few more, i have 14 now
JUST too COOL Bro, I liked it alot. Great Job
awesome stopmotion! thats a real nice crane too!
@cat325ccr thanks
Awesome stop motion!
in real life what would be the total weight ?
I feel like 10 years younger
hey whats the number one website you get crane models from
evot-usa.com dhsdiecast.com diecastmodels.co 3000toys.com
ok thx
wow! great great job! best yet!!
your so lucky to have the money to do this and can i get some help on finding a good starter crawler crane and maby a site to find one
sweet man just waiting on mine from DHS. Good music aswell
nice vid. 1 remark though, some of your arriving parts are divided in more pieces in real life. crawlers are two parts for example
but very enjoyable to watch
Hamlet Trương terex demag cc 8800 exo assembly and lift controlled
You sir have an awsome hobby im incredible jalous cuzz i cant affort this but one day i will i hope so..
thank you!
Betreibe dieses Hobby auch. Ein schönes aber verdammt teures Hobby
can you PM me where did you buy those die cast things?
Dhsdiecast.com
3000toys.com
Evot-USA.com
Diecastmodels.co
8:23 so many freaking sheaves omg bet that took forever....
nice video and such a huge crane indeed!!
buenisismo video felicitaciones ,Nice video congratulations
Increduble, is awesone
Just too cool! Thanks for sharing.
What is the name of this firt music of video
luis ricardo catalyst by linkin park
Nice video keep them coming!!
thanks
excellent choice for music nice vid :)
it's cool that u did stop motion. but I need to see your JSA and where is your spotter. lol.
Joseph Wright bg
I LOVE Your videos Cranedude07
what size was your trucks?
1/50 scale
you need to make a stop motion just like this with the manitowoc 31000 lol
You are so skillful.
Awesome video!!
twentynineification
@cranedude07 actually I think it's a coke drum... but I prefer your other definition... beer drum lol...
Thanks you, Videos very nice,
Excellent stop motion!
love your vids
Great job.
@CrazyNathaniel oh, nah it's just a beer tank haha
@TexasChevrolet 1/50