Broken Zipper Fix #2

Поділитися
Вставка
  • Опубліковано 5 вер 2024
  • This is a response to a viewer who wanted to know what to do if the Insert Pin is missing. The Insert Pin goes into the Box Pin. That is what aligns the zipper.
    I hope this video is valuable information for all who likes sewing and stitching their clothing items.
    Even if this looks difficult..it is not that hard to do.
    DIY Forever!
    (Do, It, Yourself)

КОМЕНТАРІ • 44

  • @EddieMagana
    @EddieMagana 2 роки тому +3

    Ha ha... you got me. Lol. Not what I was looking for, but thanks for the laugh.

  • @shayshores4571
    @shayshores4571 3 роки тому +3

    This vid is almost 2 yrs old but it saved the zipper on my tote bag thank you😁

    • @M-E-G-A
      @M-E-G-A  3 роки тому +2

      Thank you it deserves more views and sharing.
      If you can share it that’ll give it a boost!👍🏼

  • @jamesff68
    @jamesff68 3 роки тому +3

    It worked! Saved my favourite zip hoodie! Cheers!

  • @JNE1
    @JNE1 2 роки тому +1

    Well you saved my old liner for my jacket 👌👌

  • @seasons0123
    @seasons0123 3 роки тому +3

    Zipper pin. Buy the way that is not fixing the zipper. That's upcycling. LOL

  • @highendtrends3508
    @highendtrends3508 3 роки тому +1

    Omg! I literally thought you where gonna make a new zip tip. But this is a great video on “ this is the way it is now” or “this is the best it’s gonna get” lmao

    • @M-E-G-A
      @M-E-G-A  3 роки тому +1

      You’ve hit it on the point!
      Thank you. 😄

  • @viewfinder2021
    @viewfinder2021 3 роки тому +2

    Nice one myan .. thanks

  • @scottish785
    @scottish785 2 роки тому +1

    Thanks this is an idea as I have a nice Alaska Railroad jacket with their old logo and would hate to loose it so this is one idea I will add to my pot of ideas.

  • @pilucalondon
    @pilucalondon 4 роки тому +15

    You just broke a perfectly fine jumper to do a video, and for that, you have a like...you are funny :)

    • @M-E-G-A
      @M-E-G-A  4 роки тому +1

      It is a fine jumper but it’s dangerous to wear its color where I live. Thanks for your support.

    • @kikithepupper6774
      @kikithepupper6774 3 роки тому +1

      @@M-E-G-A oh no, by any chance is it because of gangs. That's how it is where I live

    • @M-E-G-A
      @M-E-G-A  3 роки тому +1

      Kiki the pupper indeed.

  • @hutchie5972
    @hutchie5972 4 роки тому +1

    Saved a fortune. Spot on.

  • @calholli
    @calholli 2 роки тому +1

    I used to do this repair in the past--- but I would sew up about the bottom third of the zipper; basically turning it into a "pull over" style. When I was younger, having a "pull over" jacket was all the rage. lol.. I had a Dallas Cowboys pull over style Starter jacket, not gonna lie.

    • @M-E-G-A
      @M-E-G-A  2 роки тому

      It’s the best feeling when you fix it yourself!😃 A little repair work let’s you keep the things you like. Oh, and nice guitar music you played on your channel!👍🏼

  • @bryan_100x
    @bryan_100x 4 роки тому +3

    Exactly what I was thinking if I had the materials😂.

  • @ForGodsolove
    @ForGodsolove 2 роки тому +1

    So I have a kids spiderman over the face hoody with broke zipper and the zipper broke can you post a video

    • @M-E-G-A
      @M-E-G-A  2 роки тому +1

      I did a video on zipper repair. Check my list of videos I did. You’ll see it.

  • @abdulrahman-hm3fg
    @abdulrahman-hm3fg 3 роки тому +2

    Thanks man

  • @seattlesportsguy2684
    @seattlesportsguy2684 3 роки тому +2

    But can't you clamp on a new end slide?

    • @M-E-G-A
      @M-E-G-A  3 роки тому +1

      I thought about that if you can salvage the pin from another jack. But removing it may be tricky. You’ll have to pry it off with a smaller screwdriver. And you’ll have to use nippers to clamp it precisely on the material.

  • @BecBec1967
    @BecBec1967 3 роки тому +1

    How do you fix a long coat zipper that the pin, what you cut off, is too frayed to go into the anchor box to zip the coat.

    • @M-E-G-A
      @M-E-G-A  3 роки тому +2

      You could use pliers, needle nose pliers and squeeze it in shape narrow enough it’ll slide in the box again. Try that. 👍🏼

  • @mexiluvr
    @mexiluvr 3 роки тому +3

    well thats pretty useless if its a heavy coat no one wants to pull your leather coat over their head

    • @M-E-G-A
      @M-E-G-A  3 роки тому

      If the heavy coat costed 100+.. then you can pay an experienced tailor to replace the entire length of that side. Be sure not to pay for the other side which is fine. Some zipper teeth are universally the same design, but don’t get suckered into paying a bunch of money for both sides. Unless you can live with pulling the coat over yourself for free.

  • @kevinmatthews5897
    @kevinmatthews5897 3 роки тому +1

    wot do you do

  • @mikesmithe1325
    @mikesmithe1325 2 роки тому +1

    I want my 5 minutes back

    • @M-E-G-A
      @M-E-G-A  2 роки тому

      REFUND OF MINUTES
      Video 10:25 min/sec
      Refunded -5:00 min/sec
      Remaining 5:25 min/sec
      Credit 5:25 min/sec
      Remaining credit can be used for other video content.
      Credits are not redeemable for purchase.
      Thank you. Come again.👍🏼

  • @DryUrEyesMate
    @DryUrEyesMate 2 роки тому

    Why not just replace the pin at least that why it won’t look stupid

    • @M-E-G-A
      @M-E-G-A  2 роки тому

      It can be difficult to stitch the pin back on. The alignment may be off but the pin won’t last for long. I’ll look into it.

  • @sarahblue5531
    @sarahblue5531 3 роки тому +2

    Do you really need 10 mins for this

    • @M-E-G-A
      @M-E-G-A  3 роки тому +1

      I felt the last part was just for aesthetics.
      With all repair jobs there must be Refinement.
      It’s a final touch of completion for professionals-sake for the customers.
      Much like washing a car and they wipe the windows and body spotless. 👍🏼

    • @seasons0123
      @seasons0123 3 роки тому +1

      Nope... I skipped the sewing part to find out what he was doing. LOL

  • @sabaaman8259
    @sabaaman8259 3 роки тому +1

    You can't do that for a jacket. Can you?

    • @M-E-G-A
      @M-E-G-A  3 роки тому

      It depends on the material of the jacket.
      Is it leather, synthetic leather?
      What type of zipper is it?

    • @sabaaman8259
      @sabaaman8259 3 роки тому +1

      I am sorry your video is not helpful to me. I want my jacket to remain a jacket, not be a pullover. 😀

    • @M-E-G-A
      @M-E-G-A  3 роки тому

      @@sabaaman8259 is the pin missing from the jacket?

    • @simonhagle7488
      @simonhagle7488 3 роки тому +1

      @@M-E-G-A for me it is

  • @elleonclouds3589
    @elleonclouds3589 4 роки тому +1

    men are men, as long as things "tie up', hehehe, it doesn't matter if the thread and the fabric COLOR doesn't match.... peace... and oh, the 'knotting" technique is..... hehehe, sorry

    • @M-E-G-A
      @M-E-G-A  4 роки тому +2

      yes, the knotting is uh, a bit typical. Sloppy.
      But it can hold together.
      On a wing and a prayer.
      Peace to you too.