It will be helpful sometimes if you show where to hook up your probes and how to set up the oscilloscope scales. That will give your new audience better understanding. I like your content and i really appreciate what you do
I have the Micsig Gen4 STO1004 with the 8” screen and side buttons. Been happy with it. The one you’re using is the Gen 5 10.1” but after some research i saw that Micsig also has a Gen 5 with 13.1” display. However i don’t see any U.S. sellers. So don’t know if is available here yet. The screen is gonn be slightly bigger that the Autel Ultra screen for comparison. I donno if ima miss the buttons, but i do want a bigger screen.
Thanks for sharing that one, it's not every day we get someone showing the true confirmation of everything outside the dme working and doing its job, and simultaneously show that the dme isn't responding to its inputs. I've personally haven't run into that so def will keep it in the back of my mind. 👍👍
I had a GM van pre OBDII do that to me. The tps at its output read .6 volts, and the scan tool reading was climbing from .7 volts and it slowly passed 1.5 volts. A reman GM PCM fixed it. Your scope gave a great reading. It's great when you can surround the problem with the scope and the diagnostic tool! Thanks for the video Mario.
It will be helpful sometimes if you show where to hook up your probes and how to set up the oscilloscope scales. That will give your new audience better understanding.
I like your content and i really appreciate what you do
Yep!
That the dme he’s pierced into
You got it, I’ll be doing more setup in my videos
Truly dependent on the circumstances though. Things have been hectic as of late
@@SuperMarioDiagnosticsyeah close up shots or still photos please
Wasn't really the purpose of Mario's video , he was just showing a dme issue and not really a scope class
I thought you died
i dont think this is simple resistor,transistor, diode or capacitor problem inside the DME. Must be processor or MCU. Now this would be a repair !
Can u show hooking up the scope
good to see ya Mario ,cheers
I have the Micsig Gen4 STO1004 with the 8” screen and side buttons. Been happy with it. The one you’re using is the Gen 5 10.1” but after some research i saw that Micsig also has a Gen 5 with 13.1” display. However i don’t see any U.S. sellers. So don’t know if is available here yet. The screen is gonn be slightly bigger that the Autel Ultra screen for comparison. I donno if ima miss the buttons, but i do want a bigger screen.
Could the DME be ignoring the pedal position sensors inputs if the DTCs is set? If you clear codes, does data pid come back? Just curious.
Cuanta diferencia entre mig sun y pico ocupo uno pero no money 😂
Thanks for sharing that one, it's not every day we get someone showing the true confirmation of everything outside the dme working and doing its job, and simultaneously show that the dme isn't responding to its inputs. I've personally haven't run into that so def will keep it in the back of my mind. 👍👍
Buenísimo primos
Excellent Mario
Nice diag, Thanks! Are you going to be doing a review on this scope?
Good stuff Mario
POST. MORE. plz
Great diag! Hope they go for a trouble free new one!
Hola marito
Que es ¿ dme? Sorry me no comprendo
La computadora del carro.
I had a GM van pre OBDII do that to me. The tps at its output read .6 volts, and the scan tool reading was climbing from .7 volts and it slowly passed 1.5 volts. A reman GM PCM fixed it. Your scope gave a great reading.
It's great when you can surround the problem with the scope and the diagnostic tool!
Thanks for the video Mario.
Solid video. It's a while since i saw a micsig in action. This scope have a nice touch to it.
Keep em coming brother , nice quick diag
Nice one. I haven't seen it before.
Saludos bendiciones
Voodoo
👍👍👍
WTF is a DME?
Digital Motor Electronics. DME SHORTLY.
Just another fancy word for ECU or PCM
@@dude8165 BMW Group mostly word.
SHREWD Super Mario Diagnostics
👌
👍
From Nick Ayivor from London England UK 🇬🇧 ⏰️ 07:58am Good Morning 🙏 🌄 🌧 more 🌧 🌦 🌂 ⛈️