Just wanted to say this is a great video and really helped me install new door speakers. Very easy to follow and good at explaining in detail. After installing the front set by just popping off the grills, The back grills were making me scratch my head. Thanks
Really appreciate your video as I was struggling before I watched this. I did all the steps while watching just pausing and restarting for each step. Great video!!!
Thank you! Both of my back doors stopped opening and getting the panels off was giving me hell. Thanks for the tip on the handles too, I'll know what not to do when I put them back on. (I'm not a mechanic but I like to work on my own when I can).
Thanks bro. My door wouldn't open with door release issues, if not for video would of never found last screw on bottom of panel. Well put together video.
I have this same truck 2004 model. I need quiet ride wheels and I almost want to take the plastic door panels off to reduce rattling on any bumpy streets or especially offroad. Plus my speakers clip really bad and vibrate the panel which makes it sounds worse. need to be replaced. Any suggestions to make the truck in general have a smoother quieter ride.
You would need to take all the door panels off and use put sound deadening material in the door panels. You could even double up on layers where space permits. Here's some on Amazon amzn.to/3K90EXP As for the speakers I would basically glue them in with some silicon caulk. Still use the clips, but the caulk would hold everything firm and give a softer surface for the speakers to rest on.
4:38 you can see the door with the panel off. If you look to the left of the speaker, there is a opening there that will allow access to the window track. You might have to remove the speaker as well to fasten the track back onto the window glass.
They are 6 x 8 this is the exact speaker I have installed in my rear doors www.amazon.com/dp/B07VFMHC54/ref=cm_sw_r_cp_apa_fabc_NK2D7K7Q6QZKQKM78WTK?_encoding=UTF8&psc=1
Not surprised. On my driver side front door my window cable broke and I replaced it with an aftermarket parts. I got the motor, tracks, cables and all on Amazon for around $60. I installed it and it been working great for the last two years.
THANK YOU.
Good lookin on screwing down the door handle bro. Thanks
Good video man. Thnals again
Just wanted to say this is a great video and really helped me install new door speakers. Very easy to follow and good at explaining in detail. After installing the front set by just popping off the grills, The back grills were making me scratch my head. Thanks
Appreciate the comment man!
Really appreciate your video as I was struggling before I watched this. I did all the steps while watching just pausing and restarting for each step. Great video!!!
Really super fine video. You are an excellent teacher. Thank you very much.
Solid walkthrough dude. Thank you, you seem very knowledgeable.
Totally underrated video, most helpful.
Thank you! Both of my back doors stopped opening and getting the panels off was giving me hell. Thanks for the tip on the handles too, I'll know what not to do when I put them back on. (I'm not a mechanic but I like to work on my own when I can).
Thanks for door handle reinstall tip. It was giving me fits.
Yo watched your video on finding the new hard drive you put out a couple years ago and wanted to say thanks for helping me with that.
Appreciate the comment, glad it helped you out.
Yo tank you dawg low-key saved my ass
Thanx for the video and reminder of the door handles glad I watched this first 👍👍
Thanks bro. My door wouldn't open with door release issues, if not for video would of never found last screw on bottom of panel. Well put together video.
Great video sure helped me a lot!!!
Now off to find the rattle that recently developed. Thanks for the how-to!
Great video. Thanks for the quality explanation.
Thx man
Appreciate you 🙏
Great video. You're a life saver.
Great video. Thanks a ton
Thanks great video 👍
Great instruction. Thank you.
yessss finally good video
Thanks men!!!
Outstanding video. Thanks.
Thanks for the vid bro, very helpful 😎👍🇺🇸
I have this same truck 2004 model. I need quiet ride wheels and I almost want to take the plastic door panels off to reduce rattling on any bumpy streets or especially offroad. Plus my speakers clip really bad and vibrate the panel which makes it sounds worse. need to be replaced. Any suggestions to make the truck in general have a smoother quieter ride.
You would need to take all the door panels off and use put sound deadening material in the door panels. You could even double up on layers where space permits. Here's some on Amazon amzn.to/3K90EXP
As for the speakers I would basically glue them in with some silicon caulk. Still use the clips, but the caulk would hold everything firm and give a softer surface for the speakers to rest on.
I need to replace my plastic door handle. Do you have a video on that? Thanks. Good explanation on your part.
@@motehopper sorry I don't have a video on that. Good luck on your repair.
Well explained thanks brother 👍
Good stuff
Thanks
How do I get to the window? My window fell down into the door.
4:38 you can see the door with the panel off. If you look to the left of the speaker, there is a opening there that will allow access to the window track. You might have to remove the speaker as well to fasten the track back onto the window glass.
Can anyone tell me how to where the window sits? Mine is broke and am trying to replace
What size are the back speakers ?
They are 6 x 8 this is the exact speaker I have installed in my rear doors www.amazon.com/dp/B07VFMHC54/ref=cm_sw_r_cp_apa_fabc_NK2D7K7Q6QZKQKM78WTK?_encoding=UTF8&psc=1
i see you are from KC Also!!
Yep, Go Chiefs!!!
When the cable ends break the dealer wants to sell the entire mechanism
Not surprised. On my driver side front door my window cable broke and I replaced it with an aftermarket parts. I got the motor, tracks, cables and all on Amazon for around $60. I installed it and it been working great for the last two years.
Thanks