You can attach . If you do make sure you use a plate underneath to reinforce it. Use a piece of steel and drill a few holes that line up with your bolts to give it more strength.then just tighten down like a sandwich 👍🏻
There is also a one piece system instead of the 2 pieces. I got the 3 tool rack that's long for trailer floor mount. I mounted inside the bed of my ford ranger. Had to drill obviously and get my own bolt, but works perfectly. Super tight, zero movement. Added rubber to inside the mounts so nothing hurts the handles. Also wrapped my trimmer shafts with electrical tape where it rests in the front mount. Hope this helped. I love mine. Great alternative to green touch racks until later in business.
No good sadly u have to mount on the floor of the trailer or they WILL WOBBLE AND EVENTUALLY BREAK which means u will have to do a little fab work urself but our company bought 7 all but 1 is broke and only able to hold 1 trimmer bottom IS AND HAS BEEN SOLID TOP NEEDS RETHOUGHT CHINA COME ON
This the best set up I've seen for diy. Plus it fits the budget!!!$$$
THANKS FOR THAT ADVICE AT THE END NEEDED THAT ALSO MINE CAME WITH A J SHAPED PIECE WITH HARDWARE AND A SPRING
Hows the rack holding up? I'm wanting to get a Equipment defender racks but there $$$$
So far so good!! Holding up great for the price. They do the job. Good luck
@@HighRidgeHandyman I'll go ahead and order them. For the price you can't beat it
@@wardor9214did you buy they?
Are they still holding up mine are wobbly and I tightened everything right
So far so good. Try using lock washers👍🏻
Can we drill this onto the side of a pick up truck if we don’t mind drilling holes?
You can attach . If you do make sure you use a plate underneath to reinforce it. Use a piece of steel and drill a few holes that line up with your bolts to give it more strength.then just tighten down like a sandwich 👍🏻
There is also a one piece system instead of the 2 pieces. I got the 3 tool rack that's long for trailer floor mount. I mounted inside the bed of my ford ranger. Had to drill obviously and get my own bolt, but works perfectly. Super tight, zero movement. Added rubber to inside the mounts so nothing hurts the handles. Also wrapped my trimmer shafts with electrical tape where it rests in the front mount. Hope this helped. I love mine. Great alternative to green touch racks until later in business.
"this is how we open this when we have a Ford"... (Click, nothing happens) 😂😂😂. "I'm on a slant!!"
At High Ridge we don’t cut anything out! Good or bad but this Ford will take you off the line in two seconds bro
Hello, do these hold up well at high speeds or bumpy roads?
Yes haven’t had any issues yet👍🏻
@@HighRidgeHandyman good to know, thanks
Can't they just still your attachment
No good sadly u have to mount on the floor of the trailer or they WILL WOBBLE AND EVENTUALLY BREAK which means u will have to do a little fab work urself but our company bought 7 all but 1 is broke and only able to hold 1 trimmer bottom IS AND HAS BEEN SOLID TOP NEEDS RETHOUGHT CHINA COME ON