Without tr.eto you are doing all this job. I am really appreciate you sir.. One of the best honorable ETO. I am waiting for your next reefer knowledge sharing video. Plenty thinks I am learning from your videos only..Thank you so much sir.
Your videos are fantastic! I love how you start each one with a scenic view of marine industry. It really sets the tone. However, I think the intro scene could be a bit shorter to keep viewers' attention. Thank you for sharing your knowledge 🙏
Boss i dont have expercience in reefer but i saw your video i learn lot and understand coz im working at ammonia industrial refrigeration i want to experience in reefer can you advice me what i can do first to join reefer same like you
Jack... Can you please tell about tech work squad on a cruise ship position... What is the duties and responsibilities of a that position ( tech work squad)
I have a reefer starcool that’s displays no phase detection 423 starcool unit unit has been running fine for a week now in range did my Morning round this morning aboard ship noticed unit off turned it back on and got that alarm in the past most time I could switch two leads on the plug or change it out and be good no dice so I changed the power measuring board cable to the unit also bypass the fc still no dice show I had a spare cable I ran just to test to see if it was the cable k got 440 across each phase but I am still displaying 330 across each phase on the display Do YOU think it might be the controller
Do your ship normally have a large amount of these kinds of spare parts on board for these refer boxes, and do you sometimes have to deal with boxes of other brands, or are they mostly the same manufacturer used?
Very nice video.. promote channel to next level. Sir NSK YSK meas And sir please make video on how and what controller settings we have to do for dikine reefer.
They running machineries that can get malfunction at any given time, especially transporting from the port, to track and loading to the vessel, lifting them up maybe 30-50 meters high and put down from that height. The bang, vibration and shock it may happen.
@@leckyjake that is true jake... after load just checked unit not running.... open panel and found all contactor was not attached well... some fuse torn out... yeah 🤭🤭
sir good day. i have a problem i hope u help me. it regards. in generator set. cummins faraday. if the gen set alarming. the error indicates in module display. is over voltage what is cause problem.
Sir how about the model of CA controller magkaiba ba un sa ibang controller ng starcool, nag palit kc ako ng controller ng CA unit ang pinalit ko is SMC 6.2 pero after ko ikabit nakalagay sa display not same program.. Ano dapat ko gawin sir dapat ba iprogram ko un kc hnd ako marunong mag program
I think this ship have a reeferman onboard because you have too many job onboard without enough time to attend every thing i believe this ship is very huge about 8000 Teus or more imagine 1000 reefers containers onboard to you alone
Good afternoon Mr. Jake i would like speak to you about job right now i'm unemployed could you please send to me any contact way??? Thank a lot in advance take care of yourself
Without tr.eto you are doing all this job. I am really appreciate you sir.. One of the best honorable ETO. I am waiting for your next reefer knowledge sharing video. Plenty thinks I am learning from your videos only..Thank you so much sir.
Your videos are fantastic! I love how you start each one with a scenic view of marine industry. It really sets the tone. However, I think the intro scene could be a bit shorter to keep viewers' attention. Thank you for sharing your knowledge 🙏
Thank you lecky for your information . I also reeferman. I wish your future
Thank you for the support
Thank you sir same pag share palagi ng video, it helps more... Good bless always...
😂 God bless always...
Thank you Sir, Your video helps me to learns lots of things.
Much appreciate your effort in making such a nice and step by step troubleshooting video
New subscriber here, thank you for the information this will help me for my future career.
Another excellent video. Well explained and keep them coming👍🏼
Thank you, Sir... Fair winds and following seas!
Thank you
Boss i dont have expercience in reefer but i saw your video i learn lot and understand coz im working at ammonia industrial refrigeration i want to experience in reefer can you advice me what i can do first to join reefer same like you
el mejor tutorial que he visto felicitaciones ,estamos en contacto
estoy en colombia y soy tec reefer
Very good excplenation thank you my friend. 👋👋👋👌🏼
Thank you sir for making such videos
Awesome video sir!!
Nice video lecky
Jack... Can you please tell about tech work squad on a cruise ship position...
What is the duties and responsibilities of a that position ( tech work squad)
Pa content po yung CI or cold ironing. Thanks.
Thanks for sharing sir.
I have a reefer starcool that’s displays no phase detection 423 starcool unit unit has been running fine for a week now in range did my Morning round this morning aboard ship noticed unit off turned it back on and got that alarm in the past most time I could switch two leads on the plug or change it out and be good no dice so I changed the power measuring board cable to the unit also bypass the fc still no dice show I had a spare cable I ran just to test to see if it was the cable k got 440 across each phase but I am still displaying 330 across each phase on the display Do YOU think it might be the controller
just go to the configuration and choose phase detection to CW or CCW depending on the correct rotation of your fans.
Do your ship normally have a large amount of these kinds of spare parts on board for these refer boxes, and do you sometimes have to deal with boxes of other brands, or are they mostly the same manufacturer used?
Nice sir
Good info lecky! 👏 But why you did not call the port reefer technician, instead?
It was the second to the last container that was loaded hence no more time to call for technician
do they alo have extra harness or connector?
Very nice video.. promote channel to next level.
Sir NSK YSK meas
And sir please make video on how and what controller settings we have to do for dikine reefer.
Tks you very much indeed.
Great content @leckyjake ,is eyesight or lasik acceptable in merchant navy
Yes it is
Good information sir , but one thing after immediate loading , if any alarm is there , can we call techn.
Or unloading this unit to ashore back 🤣🤣🤣
All those reefer containers has been checked previously no fail should occur
They running machineries that can get malfunction at any given time, especially transporting from the port, to track and loading to the vessel, lifting them up maybe 30-50 meters high and put down from that height. The bang, vibration and shock it may happen.
@@leckyjake that is true jake... after load just checked unit not running.... open panel and found all contactor was not attached well... some fuse torn out... yeah 🤭🤭
@@leckyjake good job ... videos are reference to us
Hello I have a question . My display is not getting any power . Tryed my other control and still not working . Followed it back to K11 any help ?
Thanks a lot
please make a video on how to run reefer in controller bypass mode
Master pwede b I convert ung daikin EEV into other EEV and what brand can fit to daikin EEV
Mag emergency cap/magnet ka nalang
I have Al J291 Daikin LXE10E 136A
I cant find it the problem
Why don't you make more videos on Reefer Container ?
We are waiting for your new videos.❤
sir good day. i have a problem i hope u help me. it regards. in generator set. cummins faraday. if the gen set alarming. the error indicates in module display. is over voltage what is cause problem.
Sir how about the model of CA controller magkaiba ba un sa ibang controller ng starcool, nag palit kc ako ng controller ng CA unit ang pinalit ko is SMC 6.2
pero after ko ikabit nakalagay sa display not same program..
Ano dapat ko gawin sir dapat ba iprogram ko un kc hnd ako marunong mag program
thank u sir
By checking resistance how you find out that pressure switch is closed I could not understand? what's the relation ?
if alarm is active but the pressure switch resistance is closed then the alarm should not be there.
@@leckyjake what do you mean by pressure switch resistance is closed?
@@muneerkhan8127 Well if the pressure switch is open then what resistance would you expect?
thanks
Keep SAFE 🙏
THANKS
هل لي ان اتواصل معك سيدي
انا اعمل في هذا المجال
واريد التعلم منك
اذا تسمح لي
👍
satayendra Kumar mishra
reefer container technicians
I think this ship have a reeferman onboard because you have too many job onboard without enough time to attend every thing i believe this ship is very huge about 8000 Teus or more imagine 1000 reefers containers onboard to you alone
We have a ship that has the capacity of 1, 707 reefer containers alone. The biggest we have is having 19,600 TEUS.
Good afternoon Mr. Jake i would like speak to you about job right now i'm unemployed could you please send to me any contact way??? Thank a lot in advance take care of yourself
It is dangerous to work in ship as ETO officer
The unit continue AW307 😅 UNIT STOP
Why this loud music? Why?