Great! This is a trustworthy air pump, dropped and got ran over by truck couple of times and it still works. I’m gonna replace the batteries when my new 18650 arrives. :-)
Hi, your information is very good. A thousand thanks. It made me happy to watch them. I changed the batteries. But now the batteries are empty. I can't load it. I tried with different cables. I tried different grips. I tried with a different charging cable. What should I do? Can you help me?
Brother if you can let meknow the volt and mAh of the batteries. One more thing..is it mandatory to put the bms or without bms also it will run smoothly.
This was very helpful repairing my inflator... but instead of a blade, i used a paperclip through the holes to pry open the bottom cover... thanks for sharing tis video
Thanks for this Video but will you please guide us that How can we make any Tyre Inflator Air pump DC 7.4V to 12V Car/Bike battery Alternative. I mean we want to run Inflator with 12volt cliper Battery. Is it possible with resistance.
Para hacer todo eso mas vale tirar el cacharro y comprar otro nuevo..vaya audisea para cambiar una simple batería esta echo para q sea casi imposible remplazar 🔋.. Por esto no compraria estos cacharros ala q se funde la 🔋a tirarlos
A small hint, you should add as a disclaimer that this should not be done by anyone who has no idea about the matter. What you are doing is more dangerous than helpful and can quickly go wrong for non-experts. The battery could explode with serious consequences.
@@thornea7015 correct. I failed, first I short circuited the batteries when trying to remove the contacts with a plier causing sparks which burned my palm. Then the contact disconnected from the board, when I soldered it together, I accidently short circuited the board causing a chip to burn. Also soldering those contacts is not easy, they won't stick to the solder. Also there won't be enough space to pur it back. I don't want to think what would happen if they accidentally short circuit when it's unattended. Better just to buy a different cheaper pump that buying the batteries. They should have made it easier to replace batteries.
Baya chapuza😂😂😂 esperemos que de la vibración no se te despegue la soldadura o se recaliente i se te haga un corto con el estaño en la batería i te explote en la cara para eso usa mejor un soldador de puntos i nickel no eso 🤦
Estoy de acuerdo. Es una chapuza y un peligro soldar eso con estaño y no con un soldador por puntos. De la vibración se le puede despegar perfectamente el estaño.
![Xiaomi Mijia Air Compressor 2 [25% Faster] vs Mijia Air Compressor 1s Teardown, Test, Compare 4K](http://i.ytimg.com/vi/UfSYfcVE4OU/mqdefault.jpg)
This shows how messy it is to replace lithium batteries 😢
very good video. Detailed and well explained. Blessings
Nice! Obrigado meu amigo!
Can u post a battery link or something to get the replacement battery please.
Rubbish product from Xiaomi , don't buy!
Great! This is a trustworthy air pump, dropped and got ran over by truck couple of times and it still works. I’m gonna replace the batteries when my new 18650 arrives. :-)
thanks
Hi, your information is very good. A thousand thanks. It made me happy to watch them. I changed the batteries. But now the batteries are empty. I can't load it. I tried with different cables. I tried different grips. I tried with a different charging cable. What should I do? Can you help me?
Brother if you can let meknow the volt and mAh of the batteries. One more thing..is it mandatory to put the bms or without bms also it will run smoothly.
18650
3.7 volt
2000mah
@@aleksadrgavr4171what did you use flathead or pointed battery ?
Esto dura 2 o 3 años, después de eso es mejor comprar uno nuevo =/
What batteries did you use? I am looking into LG/Samsung's 18650 10A discharge rate, but not sure if that is enough...
lishen battery 2600mah , same brand as original
Spot weld much better but kudos to u very useful
thank you i follow this instruction and works for me.... the hard part is soldering the batteries
You should not heat up li-ion cells so long it can damage the cell.
That's right
After i replaced the battery.its still the same.what is the possible problem?fast low batt
thank you swapped mine as well, soldering was the only hard part, thank you 😁👍
This was very helpful repairing my inflator... but instead of a blade, i used a paperclip through the holes to pry open the bottom cover... thanks for sharing tis video
The video has been very useful for me to replace rundown battary. Though a little complicated process for new comers it isn't impossible. Thanks.
thanks
still waiting when he gone use screws from the top left corner.
Where the batteries available?
Focus, why can't anyone focus.
You never put the black insulating tape back on the battery pack. Also, don't get your fingerprints all over the display 😭
Siaubas😢
Молодец. А какой температурой паял аккумулятор?
Thanks for this Video but will you please guide us that How can we make any Tyre Inflator Air pump DC 7.4V to 12V Car/Bike battery Alternative. I mean we want to run Inflator with 12volt cliper Battery. Is it possible with resistance.
Is the air hose replaceable, too?
yes
How to increase the battery capacity of Flipkart smartbuy tyre inflator?
why not just use a spot welder?
I AM AVAILABLE, BUT I WANT TO MAKE A VIDEO FOR THOSE WHO DON'T HAVE A SPOT WELDING MACHINE
Para hacer todo eso mas vale tirar el cacharro y comprar otro nuevo..vaya audisea para cambiar una simple batería esta echo para q sea casi imposible remplazar 🔋.. Por esto no compraria estos cacharros ala q se funde la 🔋a tirarlos
내꺼랑 똑같은 증상이네.. 2세대 구입해버림
U should have insulated the end of the wires before soldering all the wires....it can short if not careful!
Does anyone knows what is the battery type and capacity.
should be illegal to make things this unrepairable for no reason.
Can you convert this to have an external batteries?
too fast at disassembly, but good movie.
🐔🐔🐔🐔🐔🐔🐔🐔🐔🐔
Produto descartável é 💣
My xiaomi air pump 2 always display 264 psi hot to fix?
Any hint were to buy the bateries?
👏👏👏👏👏👏👏👏👏👏👏👏
💚💛💙🇧🇷
Thanks
kalo misal diganti yg lebih besar kapasitas batrenya bisa gak?
Excellent execution
where can we find batteries in Hyderabad?
Thank you :)
Saya punya pompa portable, eror dengan kode EAA, bagaimana cara memperbaiki.mohon pencerahan.
merek apa??dipakai gak nyala apa gmnaa
A small hint, you should add as a disclaimer that this should not be done by anyone who has no idea about the matter. What you are doing is more dangerous than helpful and can quickly go wrong for non-experts. The battery could explode with serious consequences.
what a karen
Hahahaha , cry not so loud whiner mimimi
My compressor is not being ON, and not taking charging as well, shat should I do?
battery test
omg
Thanks
отличный гайд, спасибо!
I will need to replace the battery as well. It stopped working out of the blue.
Неплохая ремонтопригодность для китайца!
я вьетнамец хаха
What kind or batter is needed
lishen 2600mha
Voltage & Ah?
4,2В , а ампер чем больше тем лучше @@jayeshdesai1627
which batteries are required?
18650 size
you can find lishen 2500mah battery
A good video has to mention the parts bought
A good video would add a disclaimer and other security Information...
@@thornea7015 correct. I failed, first I short circuited the batteries when trying to remove the contacts with a plier causing sparks which burned my palm. Then the contact disconnected from the board, when I soldered it together, I accidently short circuited the board causing a chip to burn. Also soldering those contacts is not easy, they won't stick to the solder. Also there won't be enough space to pur it back. I don't want to think what would happen if they accidentally short circuit when it's unattended. Better just to buy a different cheaper pump that buying the batteries. They should have made it easier to replace batteries.
Baya chapuza😂😂😂 esperemos que de la vibración no se te despegue la soldadura o se recaliente i se te haga un corto con el estaño en la batería i te explote en la cara para eso usa mejor un soldador de puntos i nickel no eso 🤦
Eso mismo e pensado 🤣🤣 es la primer vez q veo alguien soldando las pilas con el estaño, y no con los puntos. Este hombre es un peligro
Estoy de acuerdo. Es una chapuza y un peligro soldar eso con estaño y no con un soldador por puntos. De la vibración se le puede despegar perfectamente el estaño.
Harika video eline sağlık 👍👍
Thanks
Which 18650 battery you replaced it with?
lishen battery 2600mah
@@Mrdhk Thanks.
Volt..? 3.7V..?