I actually had a 2002 cr125r back when I was younger and I love it. Great bike, my only complaint is that it had a nickel plated top end so every time you had to rebuild it the top end would be all scarred up and would have to replace it each time as well. So would always cost more to rebuild it than your average 2stroke. I sold it for that reason and got a 04 rm125 at the time and man what a difference... it set lower than the cr but was way quicker plus has 6 gears unlike the cr that has only 5. And not to mention it was tough as hell and only had to replace the piston and rings when it blowed up most of the time. So was cheaper to maintain than the cr as well but I’m not hating tho. Both were amazing bikes.. 2strokes 4life! Lol
Interesting; I'm curious if your top ends got scored up due to improper jetting or maintenance? The cylinder on this bike was original and didn't have a scratch in it. Granted I don't know how hard it was ridden. I ride my 125s pretty damn hard, so we'll see how she's holding up when it's time for a piston. Also I've had an 02 KX125 and an 04 YZ125. I've only ridden this CR125 once so far (going again this evening!) But I actually think it's the fastest, best handling 125 I've owned. The powerband is way longer than the YZ125's and it seems like it just loves to wheelie. Very impressed so far - exceeded my expectations.
I’m not sure tbh with you I’m no mechanic.. I mean I know I how to rebuild one and never had issues with my rm... but when I was younger I didn’t know how and my dad paid mark 4 Honda shop to always do the rebuilds and maintenance and I rode it pretty hard I even started racing it but they easily could of ripped us off... happens all the time... I just know I love the bike in general, just with what I was told and everything it was to pricey for me at the time to keep and race... but all in all they’re great bikes... just like the ones you mentioned as well. I’ve rode a lot of bikes back when I raced and my 04 rm125 was my favorite 125 by far... it was built right and I barely weighed anything so I stayed with the 250s lol. But I loved the yz250s man. Def my fav 250s...
@@rapscallion3421 That may be true, but I wouldn’t know considering that 2002 cr125 was the oldest bike I’ve ever had. But yeah I was younger and didn’t know how to properly work on my stuff and got ripped off by a shop. They told me the reason my top end kept scoring was because of the nickel plated top end… which I later found out was a lie lol.
@@KincadePavich the shrouds are not, but the stock graphics are. When I rebuild bikes I try to make them look as oem as possible using oem parts as well. Thanks for responding and again, dope build on the 125!
This bike was in nice shape when I bought it and didn't need a lot of parts replaced; a lot of this build was cosmetic. So it can vary a lot. I put around $1000 into this bike after the cost of the bike itself and around $600 worth of sponsored parts. I built a YZ125 where I replaced everything and spent north of $3000 on parts. All depends on quality and what all you plan to do.
Ciao amico volevo chiederti non la usi più il coprisella rosso e nero quella originale Honda non è che me la vendi che te la pago e ti do l'indirizzo e me la spedisci
Unfortunately you can't. TX Race makes a restyle kit for the older models I believe, although it's pretty pricey. You can also swap some parts I think to make it work, but it's a lot of work.
It depends entirely on how much you pay for the bike, what's wrong with it, and how nice you want to make it. I bought a YZ125 for $400 and ended up in $3800 because I rebuilt literally everything and put a lot of nice parts on it. I bought this bike for $1800 and only ended up in around $2800 total since most of what I did was cosmetic. Just gotta be smart and plan it out. I generally always make a spreadsheet and price everything out before I buy it all so I know what to expect.
Hello so I have a 2001 cr125r that i bought completely rebuilt and it seems that I have a lack of power in the low end which it seems to bog and in the top end it seems to Plato and not want to go any faster. It became realy abvios when I drag races a ktm 85 in a bean field and lost (not rider problem) seems to run fine starts first kick, idles fine, sounds fine but it’s just not right. Im hoping someone could help me because I couldn’t figure anything out. Thanks
Forgot to add, but I have a friend that has a 2002 cr125 that just gets up and goes and likes to pick the front tire up in 3rd while i can’t get mine up in 2nd
Hell yea 🤙 I'll hopefully be picking up an 02 Cr125 myself in a couple days. Can't fricking wait 😎
You make the best looking dirt bike I have ever seen 🤩😻👌
You should upload build videos more often
Doing my best! Have you checked out the playlist? There are 5 of them now!
@@KincadePavich I have seen all your builds
Like the beats,dude does a good job.
Thanks I'll pass this on to Chandler! He's the man!
Honda made some awesome 2 smokes, nice video 👍
Finish it off with some sick spoke wraps.
🤢🤮 rice rice baby
Bro this channel is underrated I subbed watched till the end and also gave it a thumbs up
Thanks for the kind words and glad you enjoyed! Starting a KX250 build currently.
I actually had a 2002 cr125r back when I was younger and I love it. Great bike, my only complaint is that it had a nickel plated top end so every time you had to rebuild it the top end would be all scarred up and would have to replace it each time as well. So would always cost more to rebuild it than your average 2stroke. I sold it for that reason and got a 04 rm125 at the time and man what a difference... it set lower than the cr but was way quicker plus has 6 gears unlike the cr that has only 5. And not to mention it was tough as hell and only had to replace the piston and rings when it blowed up most of the time. So was cheaper to maintain than the cr as well but I’m not hating tho. Both were amazing bikes.. 2strokes 4life! Lol
Interesting; I'm curious if your top ends got scored up due to improper jetting or maintenance? The cylinder on this bike was original and didn't have a scratch in it. Granted I don't know how hard it was ridden. I ride my 125s pretty damn hard, so we'll see how she's holding up when it's time for a piston. Also I've had an 02 KX125 and an 04 YZ125. I've only ridden this CR125 once so far (going again this evening!) But I actually think it's the fastest, best handling 125 I've owned. The powerband is way longer than the YZ125's and it seems like it just loves to wheelie. Very impressed so far - exceeded my expectations.
I’m not sure tbh with you I’m no mechanic.. I mean I know I how to rebuild one and never had issues with my rm... but when I was younger I didn’t know how and my dad paid mark 4 Honda shop to always do the rebuilds and maintenance and I rode it pretty hard I even started racing it but they easily could of ripped us off... happens all the time... I just know I love the bike in general, just with what I was told and everything it was to pricey for me at the time to keep and race... but all in all they’re great bikes... just like the ones you mentioned as well. I’ve rode a lot of bikes back when I raced and my 04 rm125 was my favorite 125 by far... it was built right and I barely weighed anything so I stayed with the 250s lol. But I loved the yz250s man. Def my fav 250s...
@@CoopDeViLLeOG I'm pretty sure every MX bike from the early 90s and on was nik plated. Been using it for quite some time
@@rapscallion3421 That may be true, but I wouldn’t know considering that 2002 cr125 was the oldest bike I’ve ever had. But yeah I was younger and didn’t know how to properly work on my stuff and got ripped off by a shop. They told me the reason my top end kept scoring was because of the nickel plated top end… which I later found out was a lie lol.
Killing the game since day one! Chee
another beautiful build my bradda 🤙
Hey just wondering are you doing the surron give away?
They almost got me
@kincadepavich
These videos are so satisfying, also I'm subscribing
Thank you! A new episode of my KX250 build will be up in about 5 minutes!
Beauty of a bike man 👌👌
Great job and video!!
Nice work man
Nice video what products did you use to restore the pipe and air box?
Great video. I’m rebuilding the same bike now. You happen to have those stock rad shrouds still?
Thank you! Ido not. I sold the bike and gave the guy all the old parts with it. Are they hard to come across?
@@KincadePavich the shrouds are not, but the stock graphics are. When I rebuild bikes I try to make them look as oem as possible using oem parts as well. Thanks for responding and again, dope build on the 125!
👌
what plastics did you buy and what website??
How much does one of these rebuilds cost? I am looking into buying a cr 125.
This bike was in nice shape when I bought it and didn't need a lot of parts replaced; a lot of this build was cosmetic. So it can vary a lot. I put around $1000 into this bike after the cost of the bike itself and around $600 worth of sponsored parts. I built a YZ125 where I replaced everything and spent north of $3000 on parts. All depends on quality and what all you plan to do.
Супер👍сколько в вилку масло ушло?
I just got my hands on a 2002Cr125R needs some work but I’m willing to do it I’m at 5,000 that’s my budget what do you think about that
You can build a damn nice bike for 5K!
Ciao amico volevo chiederti non la usi più il coprisella rosso e nero quella originale Honda non è che me la vendi che te la pago e ti do l'indirizzo e me la spedisci
Which style graphics did you use like t-whatever
Sorry for the delay on this, if it's still relevant I just looked at my order history and it's "Honda Factory Series 18"
Where can I get those plastics for a 2001, every restyle kit I see is only for 2002-07
Unfortunately you can't. TX Race makes a restyle kit for the older models I believe, although it's pretty pricey. You can also swap some parts I think to make it work, but it's a lot of work.
How are you able to put newer plastics on an older bike
How much are rebuilds. I want to do one but scared it will break the bank.
It depends entirely on how much you pay for the bike, what's wrong with it, and how nice you want to make it. I bought a YZ125 for $400 and ended up in $3800 because I rebuilt literally everything and put a lot of nice parts on it. I bought this bike for $1800 and only ended up in around $2800 total since most of what I did was cosmetic. Just gotta be smart and plan it out. I generally always make a spreadsheet and price everything out before I buy it all so I know what to expect.
Hello so I have a 2001 cr125r that i bought completely rebuilt and it seems that I have a lack of power in the low end which it seems to bog and in the top end it seems to Plato and not want to go any faster. It became realy abvios when I drag races a ktm 85 in a bean field and lost (not rider problem) seems to run fine starts first kick, idles fine, sounds fine but it’s just not right. Im hoping someone could help me because I couldn’t figure anything out. Thanks
Forgot to add, but I have a friend that has a 2002 cr125 that just gets up and goes and likes to pick the front tire up in 3rd while i can’t get mine up in 2nd
If you know what’s up please let me know
ΔΥΝΑΤΟ....
How many hours did you put into this?
That's a good question... Hard to keep track. Probably somewhere around 60 hours?
PUSH that’s wild awesome build though
God the 'music' or should I say noise will give you a brain tumour...
Sounds like you might already have one!
@@KincadePavich unsubbed, bye.
@@rztrzt i will miss u
Price of cr125
quanto ci hai speso vez?