Розмір відео: 1280 X 720853 X 480640 X 360
Показувати елементи керування програвачем
Автоматичне відтворення
Автоповтор
*REMEMBER* Make sure to go to FixYourDirtBike.com for the detailed walk through! → goo.gl/L4wrTm
This channel deserves more than 7.57k subscribers. VERY good content--clear & cut
In 3 years they’ve doubled!
Very well spoken and Easy to understand Amazing Job !
Thank you!
Great video thanks a bunch. I changed bearings out many times but never thought to use the axle to keep the spacer in place, good thinking
Your a g Iv watched so many videos on how to change bearings and this was by far the best 🙌🏼
My distance collar had a slight bur and I grinder like half a miler meter off to make it smoother is that ok?
I messed up the bearing seal when i was tapping it with a hammer, must have hit it sideways, i wonder if there is a more easy way to do it
Nice job ! knows how to make a video and instructions ! Get er done!
What you tire moves from side to side?
i need to know that too
Hammer the opposite bearing out? My bearings sit on a groove in the hub, cannot hammer opposite bearing out. Heating hub up before removal works great tho!
Are the bearings the same for every dirt bike
I was thinking the same thing. Looks like this hub has a groove the bearing sits in too. Pretty sure they all do.
Thankfully, my wheelbearings aren’t shot onto another video Why is my brake caliber sticking?
4:14 Make sure you take time to clean the brake rotor before you put the wheel on. Grease at 3 o'clock.
Good catch!
Short and thorough, but a ton of rewinding .
In English.. it’s called interference fit !
Potato Tomato en.wikipedia.org/wiki/Interference_fit
doesn’t matter what grease I use
Something that’s greasy…🤣
The best grease to use is full synthetic marine grease as it has a better water repellent
*REMEMBER* Make sure to go to FixYourDirtBike.com for the detailed walk through! → goo.gl/L4wrTm
This channel deserves more than 7.57k subscribers. VERY good content--clear & cut
In 3 years they’ve doubled!
Very well spoken and Easy to understand Amazing Job !
Thank you!
Great video thanks a bunch. I changed bearings out many times but never thought to use the axle to keep the spacer in place, good thinking
Your a g Iv watched so many videos on how to change bearings and this was by far the best 🙌🏼
My distance collar had a slight bur and I grinder like half a miler meter off to make it smoother is that ok?
I messed up the bearing seal when i was tapping it with a hammer, must have hit it sideways, i wonder if there is a more easy way to do it
Nice job ! knows how to make a video and instructions ! Get er done!
What you tire moves from side to side?
i need to know that too
Hammer the opposite bearing out? My bearings sit on a groove in the hub, cannot hammer opposite bearing out. Heating hub up before removal works great tho!
Are the bearings the same for every dirt bike
I was thinking the same thing. Looks like this hub has a groove the bearing sits in too. Pretty sure they all do.
Thankfully, my wheelbearings aren’t shot onto another video Why is my brake caliber sticking?
4:14 Make sure you take time to clean the brake rotor before you put the wheel on. Grease at 3 o'clock.
Good catch!
Short and thorough, but a ton of rewinding .
In English.. it’s called interference fit !
Potato Tomato en.wikipedia.org/wiki/Interference_fit
doesn’t matter what grease I use
Something that’s greasy…🤣
The best grease to use is full synthetic marine grease as it has a better water repellent