Great job guys, you are truly the go to guys for performance and horsepower, I don’t believe that there’s anything you can’t do, keep up the good work. Outlaw
Mechanics are like Chefs ,Doctors and other high level skilled professionals... Sometimes you wish you had the better one for a more confident feeling as you watch what they do, how they do it, and overall how they conduct themselves. No Joking as they do the process. Dan comes across like a surgeon working on engines.
Love the high power stuff Lots of info for where I'm headed Twin Nelson mirror image gen2 72/68 thru a a huge water to air Got my eye on a 441 shortblock Running the 5.3 to learn on before I crank it up It's a 4wd silverado
Just started looking at your channel like what I see I wanted to ask your professional opinion on the Pro Charger and what is your favorite power adder is it Pro Charger TwinTurbo‘s or Whipple Supercharger
Just getting it all together to install I fit everything on an engine stand on a dummy with all the front accessories Got a sweet kit together ! Time to put that shit IN
Ill take a crack at this coz have the same car (not mods) but to reach 1400 in our cars requires ALOT of work/money. From the factory our 376ci can handle 900. To hit 1400 It was definitely pulled and built with cam and heads , likely a 416 or 427... our biggest issue is fuel . Going over 900-1000 requires a full port injection kit($6-7k) with injectors that will allow him to run full e85. I know he’s running meth as well.. since he’s procharged im sure it’s the big boy which is a D1X which runs up to 32psi. Even then he’s had to upgrade the tranny, rear end /axles and eventually he’ll need a rear wheel 15” Carlyle conversion because the smallest wheel we can run is 18” .no way he’ll hook on a 18”.
@@chaznad5411 d1X is smaller than an f1X and I’d say f2is bigger than both of them like if you want more than 1600-1800 wheel is f2 or bigger if close to 2k hp
Nice work bro!! I recently started my channel Speed Therapy407 as well. Bout to get down on my C6Z build. Keep up the good work 👍🏻👍🏻 I just subscribed as well
Must be nice, 1400hp but it can do more. Not hating at all just in wow mode. Would have been nice to see you test drive it but I like how you respect the cars and the customers wishes. Keep making and repairing these high horse power monsters.
That blower is about maxed out. You’re at the brink. You may can fool with the timing and add a lb or two but for all intents and purposes. That’s all the steam that’s left in that setup.
Buddy if you ever run across a calvo viper you’re going to get your feelings hurt real bad. Your vette is a bad ass ride no doubt but those calvo vipers are a whole different world seriously 😳
Thought the same. Shouldn't show him doing a handstand on a customer's car. Seems like a hack. Might know what he's doing but he wouldn't be working on my vette.
Haaa! “Customer just wants something to just jump in and drive!...” At 1400whp! ‘Merica!! Love it guys! Wicked monstah.
“Curse it out a few times” every mechanic ever
That's how I begin every project. You have to establish dominance early or else it may start to get ideas.
Great job guys, you are truly the go to guys for performance and horsepower, I don’t believe that there’s anything you can’t do, keep up the good work. Outlaw
Great, awesome, Ultra good things happening in the LMR shop. Man o man you guys is the Vette kings.
Mechanics are like Chefs ,Doctors and other high level skilled professionals... Sometimes you wish you had the better one for a more confident feeling as you watch what they do, how they do it, and overall how they conduct themselves. No Joking as they do the process. Dan comes across like a surgeon working on engines.
Love the high power stuff
Lots of info for where I'm headed
Twin Nelson mirror image gen2 72/68 thru a a huge water to air
Got my eye on a 441 shortblock
Running the 5.3 to learn on before I crank it up
It's a 4wd silverado
1400 RWHP! AT BASICALLY ZERO TIMING !!!!! HAHAHHAHAA WTF ! THAT THING IS AN ABSOLUTE BEAST
Just wanna say this is the most tasteful Corvette that I've ever seen built .
ua-cam.com/channels/Y3iW5lcAb0X3sfgYXAnzHA.html
I have it a thumbs down! Only because it’s not in my driveway. 🔥
Facts🤣🤣🤣
I feel that
Just started looking at your channel like what I see I wanted to ask your professional opinion on the Pro Charger and what is your favorite power adder is it
Pro Charger TwinTurbo‘s or Whipple Supercharger
That's impressive. Spun up that drum really fast
Just getting it all together to install
I fit everything on an engine stand on a dummy with all the front accessories
Got a sweet kit together ! Time to put that shit IN
Older video but.. love how clean this install is. 🤘
What size wheel and tires on in the back? It looks bigger..The car sounds mean!!
Everyone: Put a 10 rib on it
Fran from RPM: Just effin tighten in boys
Rpm > all for your vetted needs baby
Great video & build👍🏾👌🏾
ua-cam.com/channels/Y3iW5lcAb0X3sfgYXAnzHA.html
Beautiful car you guys do great work 👌🏽👍🏽
ua-cam.com/channels/Y3iW5lcAb0X3sfgYXAnzHA.html
I see they're fixing another one of Chuck's builds. Absolutely gorgeous car
Chuck? Who?
@@sliqdaddy91 Chucks tuning, works at hhp
@@nabws6 ty
Oh shit, shots fired.
I Seen the Valve covers and knew right away!
What is the A8 upgrade? Is it stock
Nice! Do we have an engine size?
The exhaust note needs more cow bell.
Mechanics love it when you’re in their ear at work lol
Amazing!
Awesome video. What's done to the motor ie. what cubic inch, rotating assembly, cylinder heads? Race fuel or straight E? Keep um coming!
Ill take a crack at this coz have the same car (not mods) but to reach 1400 in our cars requires ALOT of work/money. From the factory our 376ci can handle 900. To hit 1400 It was definitely pulled and built with cam and heads , likely a 416 or 427... our biggest issue is fuel .
Going over 900-1000 requires a full port injection kit($6-7k) with injectors that will allow him to run full e85. I know he’s running meth as well.. since he’s procharged im sure it’s the big boy which is a D1X which runs up to 32psi. Even then he’s had to upgrade the tranny, rear end /axles and eventually he’ll need a rear wheel 15” Carlyle conversion because the smallest wheel we can run is 18” .no way he’ll hook on a 18”.
@@chaznad5411 D1X ? I doubt that more like a F1X
@@chaznad5411 d1X is smaller than an f1X and I’d say f2is bigger than both of them like if you want more than 1600-1800 wheel is f2 or bigger if close to 2k hp
@@duhrell sorry I meant f1x
@@duhrell definitely not the D1X. Too small.
Houston House of Power is still in the game? Man, that’s a throwback...
Can't go wrong with a supercharger baby👍
Fantastic
Yes! Future driving content please!
ua-cam.com/channels/Y3iW5lcAb0X3sfgYXAnzHA.html
What motor is in it like lt4 wouldn’t take that much maybe a 416 stroker or lsx 427 I’m guessing built motor
What size procharger is that ?
Another great video, love this channel!
ua-cam.com/channels/Y3iW5lcAb0X3sfgYXAnzHA.html
What motor is this
Will the motor fit in my Miata?
🔥🔥🔥
Nice work bro!! I recently started my channel Speed Therapy407 as well. Bout to get down on my C6Z build. Keep up the good work 👍🏻👍🏻
I just subscribed as well
Cool !
What Corvette is this?
Chevy power 🔥
ua-cam.com/channels/Y3iW5lcAb0X3sfgYXAnzHA.html
Wow!😳
Where is this shop at?
Absolute beast.
OMG 😱 🔥🔥🔥🔥🔥🔥
What year is this vette
Is that a built motor?
Nice
thats a sweet blue zr1 in the background👀
stock transmisión ?
😍 love it
Sheeesh 30 beans of boost!! That’s some good curling weight
Sickest z ive seen in a while
Love the big horse power cars want to send you my C6 when the wife stops gripping about it lol you know how it is
This is my dream car.
Must be nice, 1400hp but it can do more. Not hating at all just in wow mode.
Would have been nice to see you test drive it but I like how you respect the cars and the customers wishes. Keep making and repairing these high horse power monsters.
What’s was total cost of this build and can it be daily driven ?
Yes and yes.
my heart
Was there a drive video?
I see SS 717 car in the back.
At 9:00 it looks like the intake tube is slipping off the TB towards the end of the run...
It’s using what a call a Wiggins clamp. Some people call it a clamshell clamp, but basically it allows for some movement.
Looked like Streetspeed's car in the background. When is the up date for that coming?
Seems like they've had it for awhile now. Thoght they were finished with it already...?!
Great video where are you guys located?
They are in Houston TX!
Brutal
is there gonna be a full vid on streetspeeds zr1 once its done ?
Yes, we will have a full video soon!
@@LateModelRacecraft me too. thats what i came here for. i cant wait until winter is over
That blower is about maxed out. You’re at the brink. You may can fool with the timing and add a lb or two but for all intents and purposes. That’s all the steam that’s left in that setup.
Might need an f2 pro charger that’s probably an f1X I’m guessing with 427 lsx f2 pro charger is good for another 200 wheel to 1600 wheel safe
BRING YOUR CAR TO L.M.R.🇺🇸🇺🇸🇺🇸🇺🇸
I didn’t have even see it. I knew that was Street Speeds car by the cam sound chopping wood in the back ground
Gimme that.
What transmission
👌👌👌👌
Niceeee
What does Mr. 1400HP do for a living?
Wow, I'm afraid!
Buddy if you ever run across a calvo viper you’re going to get your feelings hurt real bad. Your vette is a bad ass ride no doubt but those calvo vipers are a whole different world seriously 😳
I wanna see a test drive with this ☝️
This def needs to come back for a test drive. Although we have some big powah builds in the works rn!
Procharger bigger than my future lol
ua-cam.com/channels/Y3iW5lcAb0X3sfgYXAnzHA.html
Crazy stock looking z06 Vette 1400hp on the streets insane!
Man! Y'alls mechanic is on one too many monsters lol
Coke Zero
Thought the same. Shouldn't show him doing a handstand on a customer's car. Seems like a hack. Might know what he's doing but he wouldn't be working on my vette.
Mike leaves chat...
👍✌🤩
freakin nice build!!!!!! How much for a build like this? Thanks in advance
20k
More like 60k at minimum
Can we get some street action on this beast?
What movie was that second clip with Ashton Kutcher??
Dude where’s my car! Lol
@@johnmoniz2715 thanks bro 😂
Sic 👊👊
Finally something faster than Mike's zR1 😂 🤣
Yea that’s what we think tell mike turns it up😂😂
@@izaiabainvlogs always a bigger fish..
mikes should be 1400hp.😏😏😏😏
@@nyelement007 he's to busy jumping trucks or setting thm on 🔥 to care lol
hmmm i see the hhp on the covers 👀
The bro is funny as F
I like black corvettes.
Street speeds blue c7 is a monster also
How much is a set up like this 1400 hp. I have a 2015 z06 I would like to save on this in two three years
I have the same car. Got it in November 2021. I was asking the same question. Do you know where they’re located.
Houston,TX. Just found it in someone’s comment.
What is. Dune to car
Hey Guys do you have any updates on a pro charger for a pro-charger for c-8
Give us a call at the shop if you have any C8 questions.
@@LateModelRacecraft need your contact info
Sales@latemodelracecraft.com
@@LateModelRacecraft Thank you
Can you elaborate on build specs please?
That'd be nice!
@@whistlinduramax7723 what is dune to the car c8
I'm really warming up to the sound of prochargers
Warming up ? How can U not like em. I have an ECS on mine but the sound of a centrifugal blower with a loud blow off valve is just plain scary
Show us how fast it is on the street
What procharger f1x ???
Yes, this car has the FX-1
Fucking Aldo 😂😂 he’s a character
MAAAAN!
I thought you guys just worked on chevy vehicles
I gotta see this in TX2K
ua-cam.com/channels/Y3iW5lcAb0X3sfgYXAnzHA.html
How much $
He dont sound like he wants to b there lol