@XX629-Bulldog I had to do some trimming on some of the seals I fitted. The piston seal took some bedding in, I probably should have put a new spring in too but my plans are to take it apart just to check the piston seal is smoothing off. I think the replacement ones are a bit thick. Good luck
Yes, you're right but by the time I realised I hadn't done it, it was a couple of weeks later. I'm going to be trying to sort out a very poor firing Hector junior in the future, I'll have to be a bit more in depth with this one. Thanks for watching.
Hi Dale, no but my dad got me into airguns as a lad and I've got a few already. A bit like tools, you can't have too many, although I do need to start on the back log building up in the shed!
Struggling with my own piston seal - really doing my head in!
@@XX629-Bulldog have you managed to replace it?
@ frustratingly not yet - just running through my mind how much to trim it.
@XX629-Bulldog I had to do some trimming on some of the seals I fitted. The piston seal took some bedding in, I probably should have put a new spring in too but my plans are to take it apart just to check the piston seal is smoothing off. I think the replacement ones are a bit thick. Good luck
@ thanks. I’ve got a new spring too. Just got to pluck up the courage to trim the seal. Slowly slowly, can’t add back!!!
I've also found that rubbing leather seals with a 400 grit wet and dry sand paper helps to smooth them off a bit too.
Nice little pistol, I have a Webley Tempest, thankfully no leather seals.
Should the leather have been lubed or soaked before installation?
Yes, you're right but by the time I realised I hadn't done it, it was a couple of weeks later. I'm going to be trying to sort out a very poor firing Hector junior in the future, I'll have to be a bit more in depth with this one. Thanks for watching.
That was interesting , is it a gun you had as a younger lad? Your patients were tested on that one but success at last.
Hi Dale, no but my dad got me into airguns as a lad and I've got a few already. A bit like tools, you can't have too many, although I do need to start on the back log building up in the shed!
Looking forward to your restorations.@@Bloodshed.restorations
Please I have like this car and find some drops of oil in the exhaust what can be the problem?
ช่างปรับปรุงแล้วหวังว่าคงแรงลมสัก360สนุกแน่
Thanks for watching 👍🏻