If the tool gives an incorrect measurement how can you tell if the injector is good or not? The capacitance meter shows a measurement of 1 uF (25%) lower than that indicated by the Chinese CRI250 tester (for example if we had a measurement of 3.0 uF on the CRI250 would you judge the injector in sufficient working order?). If the tester does not provide adequate measurements or correct operating instructions (e.g.: Valve Opening test should not be performed in the manner shown in the video) it is of no use.
hello friend thanks for commenting, of course everything depends on the capacity of the electric piezo to determine the correct amount of fuel delivery, only the video is a demonstration, it is not a real repair, in a course that is taught there it is taught in a way Correct operation, the video is only an instruction for the use of the instrument.
The megatester is an excellent product with a good degree of reliability in the measurements and in the detection concept of both the blind dimension and the energy measurements and the electric charges involved during the operation of the piezo injector. In addition to the Megatester, there are also other devices for detecting the parameters of the piezo injector actuators as well as for restoring the gap between the piezo actuator and the injector body
Es buena herramienta y súper económica a Comparación de otras
consulta ¿hay alguna tabla para eso?
Buenas Noches. Todos los inyectores piezoeléctricos dan la misma medición de flujo de retorno? o hay tablas para distintos inyectores? gracias
Interesante la herramienta y una pregunta la presión de aire que usa es negativo o positiva
saludos, esta herramienta utiliza presión de aire entre 6 y 8 bar, alimentación constante.
Buen dia, que costo tiene este equipo?
Buenos días señor Humberto qué ventajas tiene este equipo
saludos, calbracion por ajuste correcto del piezo, tambien el estado de la resistencia del actuador piezo, saludos.
La pregunta es ? Esta prueba que determina realmente?
If the tool gives an incorrect measurement how can you tell if the injector is good or not? The capacitance meter shows a measurement of 1 uF (25%) lower than that indicated by the Chinese CRI250 tester (for example if we had a measurement of 3.0 uF on the CRI250 would you judge the injector in sufficient working order?). If the tester does not provide adequate measurements or correct operating instructions (e.g.: Valve Opening test should not be performed in the manner shown in the video) it is of no use.
hello friend thanks for commenting, of course everything depends on the capacity of the electric piezo to determine the correct amount of fuel delivery, only the video is a demonstration, it is not a real repair, in a course that is taught there it is taught in a way Correct operation, the video is only an instruction for the use of the instrument.
Quem vende essa ferramenta..?
It is a poorly made copy of other equipment
pero funciona
@@humbertomundaca My friend also a stationary clock indicates the exact time twice a day
What is megatester v4
The megatester is an excellent product with a good degree of reliability in the measurements and in the detection concept of both the blind dimension and the energy measurements and the electric charges involved during the operation of the piezo injector.
In addition to the Megatester, there are also other devices for detecting the parameters of the piezo injector actuators as well as for restoring the gap between the piezo actuator and the injector body
Yes you know it