I hope you can imagine the smell. The reason I do woodworking is probably because of the smell. When wood cut down, every piece of wood gives off its own unique smell. It's a pity that I can't pass this on to you guys. If you visit my workshop, I will let you smell it. It's free. 저는 여러분들이 냄새를 상상할 수 있기를 바랍니다. 제가 목공을 하는 이유는 아마도 냄새 때문일 것이다. 나무를 자르면 나무마다 고유한 냄새가 납니다. 여러분께 이 냄새를 전해드릴 수 없다는 것이 안타깝습니다. 제 작업실에 오시면 냄새 맡게 해드리겠습니다. 무료입니다.
Very nice video , nice live edge walnut slab . I purchased a 3 inch x 5 foot long walnut slab , that was from the base of the tree . One end is 2 1/2 feet wide , with the other end at 3 3/4 feet wide , for an island counter top . I didn’t have commercial tools , just orbital sander and a regular circular saw . I bevel cut the ends at a 45 degree angle at 1 1/2 inches . I spent about 15 hours hand sanding it plus 7 coats of varnish with hand sanding between each coat , looks great . When the tree was cut down , a civil war canon ball was found embedded in it
@@julienthurm95 Will check out that channel too. Pay no mind to the troll above. That’s what he does for entertainment. You’ve heard of George Nakashima obviously. His daughter still has a few barns filled with raw beautiful slabs in PA. That must be an experience to see. (Apologies for late response, just activated replies)
Outstanding !! and that’s exactly how to treat the wood sealing from water and insects. Thanks for showing the techniques. Probably this wood will last another 200+ years of service outlasting the owner’s lifetime.✌🏻
My name is Gean and I live here in the neighborhood of Itaquera, Sao Paulo, SP. Brazil. I have to admit it is a wonderful job, magnificent, you are a very competent joiner, my congratulations.
Excelente proyecto muy bien desarrollado y mejor ejecutado , pedazo de tablón que da cómo resultado una tapa de mesa perfecta , gracias por compartir , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España) 🤓 😜
Shouldn't be terribly hard. I'd think you'd have to trim the live edge so it's perpendicular to the slab face first. To make the frame, I'd think laminating the sides and top, then laying atop the slab, trace the outline, then jigsaw (or router) to fit. It's a door, so it doesn't have to fit perfectly. I would think the biggest issue would be that that slab would move more than a glacier, being so open to the elements. I suppose you could resin impregnate it somehow...... It would certainly be the oolest door I've ever seen.
@@OldNew45 I wonder if you could slice the slab in the middle and laminate a sheet of plywood between the two halves. Best look would be routering out the the center so that the 2 halves join back together. It would be quit the trick project.
@@MustPassTruck weeeeeeeeelllllllllll..... I Got excited when Matt Cremona started doing his "slab skins", then filling out the thickness with epoxy, for this very reaaon. Hey, people by thousand dollar doors all the time, right?
@@MustPassTruck same here. That's why I mill my own wood, and build my own stuff. Everything I have now is really cool, but is still pretty amateur. By the time my kids are getting their own houses, I'll hopefully be making some really amazing stuff, to fill the timber frame house we built together.
Great job, congratulation. Please tell me, what kind of finish did you use for this project? When you apply it, it looks like an oil. When you polish it, it looks like varnish.
Wow, very nice. I will get back to you later. I'm impressed with your work. I would like a coffee table like this in the future. So I will be in touch.
What happened to the circle flat umbrella for the big Aldi while the small Aldi gets a double bullet belly with drinks r us 😂 made into a lantern for more sunlight? 😂
Façonner de très belles pièces a partir de matière brute avec imagination artistique et précision qualifiée par des professionnels du domaine purement adaptés . !!!
Hi, as far as i know they first plane one side dead flat and than thickness other side to desired level. How can this machine do both 😍. Or is it because your slab is not so twisted 🙄?
What a joy to watch. Love the butterfly joints. they really add something artistic to the look of the whole thing. I wonder what a redwood or mulberry would look like in the butterfly joints.
I hope you can imagine the smell.
The reason I do woodworking is probably because of the smell.
When wood cut down, every piece of wood gives off its own unique smell.
It's a pity that I can't pass this on to you guys.
If you visit my workshop, I will let you smell it.
It's free.
저는 여러분들이 냄새를 상상할 수 있기를 바랍니다.
제가 목공을 하는 이유는 아마도 냄새 때문일 것이다.
나무를 자르면 나무마다 고유한 냄새가 납니다.
여러분께 이 냄새를 전해드릴 수 없다는 것이 안타깝습니다.
제 작업실에 오시면 냄새 맡게 해드리겠습니다.
무료입니다.
저도 12년째 반려동물과 함께 살고 있습니다. 선생님의 티셔츠문구와 후원글을 보니 마음이 따뜻해지네요. 감사합니다
부끄럽네요^^
@@mokongtv123 왜 선생님이 부끄러우신지요. 반려동물에 대한 사랑의 메시지를 전달해 주심에 감사드릴뿐입니다^^
Наблюдаю за Вами давно, практически пересмотрел все Ваши работы! Потрясающе!!! Золотые руки у Вас!!!!
Спасибо.
Gostei
Классно когда твое дерево обрабатывает и продает китаец за бешенные деньги,взяв его даром у вовы,правда же?
@@corsairxxx9625 зачем сюда то политику приписывать?) Человек-Мастер своего дела! И все!!
@@АлексейДи-е8е а тебе не обидно,что с твоего леса китаец делает товары и продает,а свои сосут бибу или кто-то не хочет чтобы мы хорошо жили?
It's incredible when an ordinary board turns out to be a masterpiece! I respect your work. I wish you good luck and inspiration!
위치좀 알수 있을까요
Sorry, but this was not an "ordinary board"
WOW ! Now that's wood working craftsmanship 👍🏻👏
Your attention to detail and dedication to the craft is what makes your work look so great.
Thank you very much for your sincere comments.
Very nice video , nice live edge walnut slab . I purchased a 3 inch x 5 foot long walnut slab , that was from the base of the tree . One end is 2 1/2 feet wide , with the other end at 3 3/4 feet wide , for an island counter top . I didn’t have commercial tools , just orbital sander and a regular circular saw . I bevel cut the ends at a 45 degree angle at 1 1/2 inches . I spent about 15 hours hand sanding it plus 7 coats of varnish with hand sanding between each coat , looks great . When the tree was cut down , a civil war canon ball was found embedded in it
I, I, I , I and I sound like your favorite subject to talk about ...
Norm Abrams called these bowties 'dutchmen'. And since then they have been one of my favourite repairs. Good job. Regards
Five Million Views says it all. Well Done.
Здорово!! Великолепный результат!! С уважением из Владивостока.
Если б всё это дерево у нас оставалось было бы ещё лучше.
А вот "БЫ" мешает!
Beautiful. Reminds me out our old shop days. I made one table like this for the owner of our shop.
Не знаю почему подсела на ваши видео. Случайно попала и не могу понять, чем зацепили, но не могу оторваться
Very nice and beautiful 👏👌👍❤😀😀😀😀
To create a beautiful table such as this is on my bucket list.
Outstanding craftsmanship. Thank you Mokong, I love your work. 👍💜
I love this kinds of comments. Thank you very much!
@@mokongtv123 😊👍💜
Have a look at Blacktail Studio. He makes beautiful epoxy tables and gives a lot of advice on techniques, tools and products to use in a build!
200 years to grow a tree like this. This means it is economically viable, so nobody seeds such tree. Tell me: was this legal extraction??
@@julienthurm95 Will check out that channel too. Pay no mind to the troll above. That’s what he does for entertainment.
You’ve heard of George Nakashima obviously. His daughter still has a few barns filled with raw beautiful slabs in PA.
That must be an experience to see. (Apologies for late response, just activated replies)
Very good video
Outstanding !! and that’s exactly how to treat the wood sealing from water and insects. Thanks for showing the techniques. Probably this wood will last another 200+ years of service outlasting the owner’s lifetime.✌🏻
Llclllcclcclcc
0
Beautiful, I really like the x ties to prevent further splitting. Fantastic tee shirt. 😊Thankyou for sharing 👍
Inspiring and beautiful work. I love how the contrasting X inlay's have become a part of the Table.
I don’t like it at all. It detracts from the beauty of the natural wood grain.
Заинтриговал название ролика. Что же вас ждало при распиле?
Оказалось-красота😂👍
It's a stunning looking table. It has a lot of personality, depth, and warm deep colors. Thank you so much for sharing.
when you have the right tools for the job , nice
My name is Gean and I live here in the neighborhood of Itaquera, Sao Paulo, SP. Brazil.
I have to admit it is a wonderful job, magnificent, you are a very competent joiner, my congratulations.
Very very good job!!!🔥👍
Too beautiful for words
Great craftsmen with brilliant skills
Красота дерева,ни один металл или камень не сравнится с ней.
Особенно если это дерево взято из России за копейки,а свои валежник собирают.
@@corsairxxx9625 троллина вали отсюда,люди тут не о политике разговаривают
@@seregapesnev5716 можеш не разговаривать,но она тебя затронет в свое время сама.
@@seregapesnev5716 или ты думаешь,что русские сами не в состоянии сделать такое?просто им не дают.
Really Beautiful hand work 👍👍👍Great video 👍👍👍
Very nice 👍
Organized,precision,perfect.
О да, такое место чудное.. Так много слэбов 😍👏👏👏 Заглубляйтесь ребята🤓
Wow!
Fantastic
I love to much walnut slab table
Thanks a lot
So nice. Woodworking is so rewarding.
너무 탐나는 원하던 테이블 이네요....나중에 단독으로 가게되면 꼭 의자랑 셋트로 제작의뢰 하고싶네요~~
멋지네요~
천연목재의 유연한 감성을 대체할 만한 물질은 없는듯 해요.
섬세하고 야무진 작업 잘 보았습니다.
Lindo trabalho também acho que poderia ter feito as borboletas com a mesma madeira pra ficar na mesma tonalidade.Parabens ficou lindo
I agree with you. Butterflies are superfluous here.
I totally agree. The butterflies look stupid. Why not use a matching wood or stain them.
Dang that's a planer. 👍. Nice. Big 💲💲💲. Table. They got a lot of money setting in that shop. Nice place. I would love to work there. 👍👍
Por que não fez os reparos (borboletinhas) com a própria madeira que cortou na borda? Ficariam na mesma tonalidade. Belo trabalho.
I just come from tiktok I saw your video on tiktok so I come Over here to see lots of other videos keep up the good work I like that.
Шикарная работа большое мастерство красота хвала рукам
Some good results fellas. Like the message on the T shirt too. Well done.
Pppppp
Pppppp
예쁘다~예쁘다~예쁘다를
연발하며 봤습니다.
손에 부상이 보이네요.
조심하세요.
멋진 영상 잘 봤습니다.
Excelente proyecto muy bien desarrollado y mejor ejecutado , pedazo de tablón que da cómo resultado una tapa de mesa perfecta , gracias por compartir , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España) 🤓 😜
muchas gracias.
Excellent travaille j'aime beaucoup le bois et quand je vois sa c est magnifique is good thank you😍😍😍😍😍
테이블 완전 이뻐요~~💖❤️💜
색깔도 이쁘네요😻 오늘영상도 재밌게 잘 보고갑니당
감사합니다^^ 아봉카동님 채널도 번창하세요 ^^
Stunning !!
Great job, Man! Amazing! Thanks for shearing!
VERY NEATLY DONE GENTLEMEN
Great job great video thanks for sharing 👍👍👍5 stars ⭐️
Amigo vc tem muitas madeiras que legal, parabéns pela mesa ficou muito linda
엄청난 정성이 들어가네요
멋진 기술입니다
재미나게 잘 보고 갑니다
Beautiful work
Я восхищен Вашей тщательной и кропотливой работой!👏👏👏👍👍👍
Very beautiful. I love solid wood.
Magnifique...
Wonder how a door would look with live edges. Getting the door frame to match would be an interesting process.
Shouldn't be terribly hard. I'd think you'd have to trim the live edge so it's perpendicular to the slab face first. To make the frame, I'd think laminating the sides and top, then laying atop the slab, trace the outline, then jigsaw (or router) to fit. It's a door, so it doesn't have to fit perfectly. I would think the biggest issue would be that that slab would move more than a glacier, being so open to the elements. I suppose you could resin impregnate it somehow...... It would certainly be the oolest door I've ever seen.
@@OldNew45 I wonder if you could slice the slab in the middle and laminate a sheet of plywood between the two halves. Best look would be routering out the the center so that the 2 halves join back together. It would be quit the trick project.
@@MustPassTruck weeeeeeeeelllllllllll..... I Got excited when Matt Cremona started doing his "slab skins", then filling out the thickness with epoxy, for this very reaaon. Hey, people by thousand dollar doors all the time, right?
@@OldNew45 yep. I'm not even wealthy or have a fancy house, but my front door would be more than that much to replace.
@@MustPassTruck same here. That's why I mill my own wood, and build my own stuff. Everything I have now is really cool, but is still pretty amateur. By the time my kids are getting their own houses, I'll hopefully be making some really amazing stuff, to fill the timber frame house we built together.
Fantastis... 👍👍👍
Wonderful workmanship.
It's a beautiful job an amazing artistic skill you guys have. Looks awesome 👌
Your tables beautiful!
Great job, congratulation. Please tell me, what kind of finish did you use for this project? When you apply it, it looks like an oil. When you polish it, it looks like varnish.
Xin chào người bạn mới, tôi rất khâm phục bạn vì bạn rất tài năng ❤️👍👍
Прекрасная работа... прекрасный стол в прекрасный дом❤ жаль, что у меня нет такого стола☺
Beautiful 💙
자재구하기, 표면처리하기 등 많은 유용한 정보를 얻고 있습니다. 감사합니다.
It's a very good video.
Have a nice day.~~
👍+++
Wow, very nice. I will get back to you later. I'm impressed with your work. I would like a coffee table like this in the future. So I will be in touch.
Ótimo vídeo. Obra de arte em madeira de lei. Quem sabe um dia irei comprar uma dessa. 🙌
Modern creative idea
요즘 셀프인테어를 하면서 목작업이 잼있어서 검색하다보니 검색해서 봤네요 나무 본연에 멋을 살린 테이블 너므 멋집니다 잘봤습니다
즐겁게 봐주셔서 감사합니다.
Beautiful indeed, I got inspired every time I watch your video, but I don’t have the tool that you used.
Parabéns ficou linda se fosse no Brasil eu ia querer uma.👏👏👏👏👍👍👍👍
No Brasil tem, conheço uma pessoa que trabalha com isso. Lá em Pernambuco.
Huuuu nao e no brasil nao pensei que era
I wish I could afford to buy one. Such beauty and art!!!!
Amazing walnut table, like always your job are fantastic, congratulations
Very very beautiful.
Hello, thank you for the movie I liked very much. I have a question, how many workers do you need to run such a factory?
Awesome video. Simply splendid artistry.
Excelente! Saludos desde Durango, México.
รวยๆเฮงๆปังๆ ติดตามแล้วจ้า ติดตามยายด้วยจ้า
มิสนี แซ่บเวอร์ นะ
Awesome table
Wonderful craftsmanship. Great video!
Parabéns ótimo trabalho,
Ficou de primeira qualidade Top 🇧🇷🇧🇷🇧🇷
What happened to the circle flat umbrella for the big Aldi while the small Aldi gets a double bullet belly with drinks r us 😂 made into a lantern for more sunlight? 😂
Façonner de très belles pièces a partir de matière brute avec imagination artistique et précision qualifiée par des professionnels du domaine purement adaptés . !!!
Trabalho ncrível. Máquinas excelentes. Meu sonho essas máquinas.
Классно получилось навсе 1000 процентов
Es un trabajo increíble amigo, quedo muy bien. ¿Que tipo de acabado utilizaste??
natural finishing oil in Korea
Only wood it’s natural healthy beautiful crate for planet to helping peoples life thanks. God forever your design never expired
Wow amazing, great job, thanks for sharing, many greetings 🙏
정말 멋지네요
국내에도 이렇게 완벽하고 훌륭하게 목재를 다루시는 영상은 처음입니다
많이 부족합니다. 좋게 봐 주셔서 감사합니다.
Beautiful
Bellísimo trabajo..., Espectacular.
Hi, as far as i know they first plane one side dead flat and than thickness other side to desired level. How can this machine do both 😍. Or is it because your slab is not so twisted 🙄?
漂亮的桌面，真是稱得上藝術作品。讚👍。台灣
Sarà un bel tavolo di noce noce non strana sarà magnifico e bellissimo bravi falegnami del legno auguri buon lavoro ciao miei colleghi
나비장부 정말오랜만에보네요
좋은거 하나배워갑니다
땜빵은 역시 과학입니다
나비장부 나무가 종류가 물푸레나무인가?
오크(서양 참나무)입니다.
You made a very beautiful table with almost a gorgeous glass sheen, though I would not have the x inlays on the top rather put them on the bottom.
Amazing and beautiful
Great job and great video 👍
Excellent work
Beautiful table
What a joy to watch. Love the butterfly joints. they really add something artistic to the look of the whole thing. I wonder what a redwood or mulberry would look like in the butterfly joints.
Wow . Incredible job.