Button Box Update and Sim Dashboard For ATS & ETS2
Вставка
- Опубліковано 26 лип 2024
- update on button box for ets2 or ats plus a look at Sim Dashboard
link to first video - • How To Build A DIY But...
USB Encoder - www.amazon.com/dp/B01LZBFMWG/...
Extra Cables - www.amazon.com/dp/B07RRSG321/...
Box - www.amazon.com/Otdorpatio-Wat...
Push Buttons - www.amazon.com/dp/B08R9P9DFC/...
3 Gang LED Toggle Switches - www.amazon.com/dp/B08SCGNRVS/...
Round Toggle LED Rocker Switches - www.amazon.com/Nilight-90013L...
3 Position Spring to Center Toggle - www.amazon.com/dp/B013OZY16G/...
Wire Ends - www.oreillyauto.com/detail/c/...
Step Drill Bit Set - www.oreillyauto.com/detail/c/... - Навчання та стиль
Hello, how did you power the 12v LED's. The encoder is 5v, correct?
Yes the encoder is 5 volts but I figured it was worth a shot to see if that 5 volt rail would power the LEDs and it just so happened it did but most of the switches that I used are rated for 5 or 12 volts some of them they did not specify but they still work anyway on the encoder the red plugins are your 5 volt rail
@@CodeB Thank you.
Could you also install an ignition switch that uses a ket to the box?
Yes I actually have another box that I have done that with just never made a video about it it's a 3 position switch that can work more realistically
@@CodeB right on. Thank you for getting back to me. I will have to do some research on how to wire it up.
ua-cam.com/video/6TolCBTvSwQ/v-deo.html this is the video I followed for key switch
@@CodeB Thank you very much. I didn't realize that it would take up three spots on the board.
Yea it's kinda a bummer I'm thinking about getting one of the Adrino boards to build my next board with but I'd have to learn to program it
I wanna let you know i use a 2 player board with 28 bytyons and one with single for my shifter
Dang that's cool what's the brand on the board?
@@CodeB kNin9 sorry for the confusion it doesn't let me edit my comment.
Will it let you post a link to it I can't seem to find it on google