Telescopic sliding gate

A roller cable mechanism is used.
A point on lower part of the cable is fixed with the grounded post.
A point on upper part of the cable is fixed with the blue panel 2 that moves twice faster than the yellow panel 1.
STEP files of this video:
www.mediafire.com/file/tgd681b...
Inventor files:
www.mediafire.com/file/xgq2u7r...
For more information see:
www.automaticsolutions.com.au/...
For gate with three panel please see:
• Chain drive 4C
where the cable drives are replaced by chain ones.

[@TechsScience]

I have made a sliding gate with same Mechanism
Thanks for this video

[@thang010146]

Hi,
I have just made a video related to “Telescopic sliding gate” with three panels.
If you are still interested in it, please see the description of this video.
Best regards:

[@stephenhughes6920]

I have the same question, could you do it with 3 panels and also cantalevered ?

[@Roaxo]

Clever idea! Thanks! Maybe i'll use similar mechanism in future.

[@osalinasb101]

Tienes algo con tres paneles pero similar a este ?

[@bisutommy79]

hi would be possible to do something like this but with three panels?

[@haihung39ma]

Cam on chu rat nhieu. Chu la tam guong cho nhung ky su tre nhu chung chau.

[@thang010146]

+Phạm Hải Hùng
Chú rất vui khi thấy việc làm của mình có ích cho đồng nghiệp trẻ.

[@haihung39ma]

Chic chu suc khoe. De tiep tuc lam

[@jysup1446]

I love this one!

[@seamusfitzgerald6506]

Hi Thang have any design for a gate that slides around the corner in sections and automatic ? Please

[@thang010146]

+Seamus Fitzgerald
I don't understand your request. Please explain it with sketches.

[@ngocdiepkieu]

cơ chế này áp dụng chế tạo cổng cửa tự động có khoảng mở rộng nhưng không gian hạn chế. video của anh rất hay. thanks

[@denisbirsa6624]

Very clever idea. Is possible to receive 3D file?

[@powergateinternationalpvt.3671]

Dear Mr. Thang
After i have seen your graphic i made a telescopic gate. I have a another gate to install. I will explain it. I want to install two motorized sliding gates in between two walls. Please help me. Thanks.

[@thang010146]

Please show sketches to help me easily understand your project.

[@simonmunday8363]

How do you work the gear wheel size out

[@thang010146]

Sorry, I have no information you need.
I made this animation just for showing the working principle.

[@mahareddylakshminarayana7944]

hi sir your are so brilliant

[@thang010146]

Hello. Thank you for watching.

[@helionishikuma]

Perfect!!!! I made it here, in my home, thanks!!!!!!

[@thang010146]

+Hélio Nishikuma
I am glad to hear that. Thank you for your information.

[@helionishikuma]

+thang010146 I would like to send a video , once it is completed . Very simple solution , and congratulations thank you so much !

[@helionishikuma]

Hellooo Thang, tomorrow I would like to send you a video of how it was, what´s your e-mail?

[@mohinistudio5913]

Hélio Nishikuma please can you send me the video of the gate you made. I also want to make one. Please

[@PRTrendsGroup]

@@helionishikuma can you please send a video of your gate...iam also planning to do same gate for my home...my mail id : [e-mail]
Thank you😊

[@daotacspkt]

very good.thanks!

[@mohamedjb1786]

amazing !

[@christopher_ds]

can you please tell me what kind of motor this is?

[@thang010146]

+Christopher Shaw
The motor shown here represents a motion source. In simplest case it can be an ordinary electric motor and a gearbox for reducing speed.

[@christopher_ds]

+thang010146
thank you for getting back to me. do you know of any upright motors such as this which automate but also support the gate through its entire length? seems to be different from your typical setup

[@thang010146]

Christopher Shaw
Sorry, I don't know.

[@kaikart123]

Anyone could explain to me why the top gears and chain also spins?

[@thang010146]

A similar case:
ua-cam.com/video/cbENtxMiRk0/v-deo.html

[@thang010146]

Another similar case:
ua-cam.com/video/sEp-K6eyYz8/v-deo.html

[@sorin.n]

Genius!

[@powergateinternationalpvt.3671]

Hi sir,
This mechanism very helpfull. Did you design 3slash telescopic gate? Please share if you have.
Thank you very much

[@thang010146]

Please refer to the following:
ua-cam.com/video/CjVJk_0uYhE/v-deo.html

[@zynthos9]

What about this makes it "telescopic?"

[@thang010146]

+Zambia95
The word "telescopic" originally is used to for device having or consisting of concentric tubular sections designed to slide into one another. However it is used also for the one that consists of panels. See:
ua-cam.com/video/u3lpW24kCgg/v-deo.html

[@osalinasb101]

Me parece un bue sistema

[@xxZerosumxx]

I need this.

[@alejandroparrello6493]

Hi mr thang, sorry my english, i from Argentina... I have one made for my own, could you give me your email or something to ask a few questions please?? thanks so much!! 👍👍

[@thang010146]

My email:
[e-mail]

[@nguboyypbn]

Con chào thầy ạ,con đang là sinh viên, con hay theo dõi các cơ cấu của thầy. Con muốn xin thầy các bộ phận trong cơ cấu được k a? tại con nhìn vẫn chưa hiểu vài chỗ cho lắm. Nếu được thầy cho con xin vào mail: [e-mail]. Con cảm ơn a!

[@thang010146]

Có files STEP hoặc Inventor cho mỗi video. Từ đó mà có từng chi tiết của cơ cấu.
Cho biết video nào, loại files gì là có link để tải về.

[@LuisMolina-rc3tm]

Nice video. Can I write you an email?

[@thang010146]

Yes. For the discussion on technical matters only please.

[@LuisMolina-rc3tm]

@@thang010146 Thank you for answer, and yes the email will be only about technical matters. What its your email?

[@thang010146]

@@LuisMolina-rc3tm
My email:
[e-mail]

[@garywheeler7039]

item 404

[@vulinh2564]

bác có thể cho cháu bản vẽ được không ạ cháu cảm ơn bác nhiều ạ!! Bác có thể gửi vào mail giúp cháu ạ [e-mail]!!

[@thang010146]

Không có bản vẽ vì xuất từ files 3D ra bane vẽ mất cả buổi.

[@vulinh2564]

dạ vâng cháu cảm ơn bác ạ