Excelente, estava procurando algo mais rápido que o Radmin, encontrei esse software, mas não sabia como configurar, agora sim, fiz e deu tudo certo, velocidade Full da rede, Parabéns.
hi i have tried this. it works flawlessly. but it does not work on multiple clients.. what is the procedure to connect multiple clients. kindly help . Thank you.. Great work!!!
@@marcelgossner8540 I had to use a USB dongle with ethernet for this to work correctly. For some reason the program didn't like my built in ethernet card.
@@goku25jasongohan23 Thanks for the answer. I also found out about it yesterday. I installed a different network adapter and it worked. Then I uninstalled and deleted the driver for the OneBoard adapter twice so that an old driver was installed and it works with that one too. So it must be a driver problem.
consulta, y es rapida ambas conexiones? claro q ambos extremos tengo buena señal. He probado algunos vpn gratuitos como hamachi y radmin, sin embargo se satura la red por mas q tengo buena señal en ambos extremos, espero que el WG me vaya bien, slds
I have two routers, one ac88u (PPPOE+DHCP) wan to pfsense (DHCP) pfsense lan to switch device, wireguard pc on pfsense lan area, do port forwarding twice, I use my mobile phone 5G to simulate outdoor connection, but it has not been able to Normal access to the network seems to be a problem with multi-layer port forwarding. I have tried to consult various information and tried many times, but still cannot solve it.
Not that I know of. If you want to make a server a fallback, the easiest solution I can think of is to just have two profiles. But if you really want to only use one profile, you can have another server that is always online that acts as the gateway, and that gateway can check which server is up and redirect you to that server, althought I don't know exactly how to do it. Like what software to use.
When I start the server, it creates the network adapter, but then it disappears and it says that it was unable to configure and then deactivates it. Can you help me?
same thing. It never will activate for me. i wish someone would make a video 30 min long of deep dive into all things about this with trouble shooting.
does this tutorial means that you have to create/edit connections every time you change of router ? Im saying this because at 3:32 you show your public IP address, but when you connect to another router it changes, right ? Please anyone respond and thank you !
Mostly good video, but after installing the sharing for my ethernet, my PC connection is lost when I activate my Wireguard. I put the client on my android and it connects but again, whether I connect wireguard in windows or not, as soon as connected I lose my internet on my PC. I need more explanations on what to use for Allowed IPs and Addresses so I can figure this out. It's very confusing.
Maybe your firewalls settings are blocking the ports and you didn’t port forward correctly or your public ip address was put wrong. Double check those two things
Não funciona!!! coloqueio o meu telefone como cliente e não funcionou !! Não tenho IP estatico , ele é sempre dinamico! Não sei onde foi buscar o ip 192.168.100.1 , configurou como assim?
Any help would be greately appreciated. I am connected to my university internet I tried to connect through my phone on data roaming but still nothing.
Try using "AllowedIPs = 0.0.0.0/0, ::/0" or "AllowedIPs = 0.0.0.0/1, 128.0.0.0/1" in the client configuration file to connect to the server. In my case, it worked, and I could connect to the Internet with tunneled traffic through my server.
If you have done everything according to the instructions and your connection still does not work, then most likely your provider provides you with Internet access through its local router and gave you a so-called "gray" or "private" ip address. In this case, it will be impossible to connect to your computer from the external Internet, because the provider blocks port forwarding on its router by default. In this scenario, you have ways to solve the problem: 1) Buying a "white" or "public" ip address allocation service from your provider, usually this service costs a couple of dollars per month. 2) Purchase a VPS/VDS server with a dedicated public IP address and configure your wireguard on this remote server.
Excelente, estava procurando algo mais rápido que o Radmin, encontrei esse software, mas não sabia como configurar, agora sim, fiz e deu tudo certo, velocidade Full da rede, Parabéns.
Se fizer exatamente o que ele ta fazendo no video funciona?
Sim, mas você precisa de ter um ip ipv4 válido e abrir a porta no roteador e no windows
@@JohnCabralf TEM QUE TER IP PUBLICO?
@@BUCA_777 ipv6 funciona também
Nicely done! . Thank you
Thanks, it works with me, but my question is how to do it with multi devices like i want 3 more clients or 3 of my device to work on it?
try using a travel router such as GL iNet where you can configure wireguard client and be shared with all connected devices
@@Userxx75jfdoirjjem thanks, and also i already figure it out, laptop to laptop and so many client can connect to wireguard.
Like everytime, usefull tip/trick ❤❤❤❤❤❤❤❤❤❤❤❤❤
it was something that actually worked, thanks
Perfect! just one thing, when importing zip file into android you need to re-enter the post, It does not automatically import the port number.
hi i have tried this. it works flawlessly. but it does not work on multiple clients.. what is the procedure to connect multiple clients. kindly help . Thank you.. Great work!!!
It's free or paid ?
@@Rjsolution1134 It's free it takes just 5 mins
Bác phát âm tiếng Anh, ngữ giọng đỉnh quá cứ tưởng người nc ngoài luôn, ko ngờ coi mấy tên user mới biết người VN :D
On my ether network connection when I click to share the connection the wg -server connection does not show.
figured it out. This video helped me finally access my network resources outside of the home! Thank you!!
what did you do? i have the same problem
@@marcelgossner8540 I had to use a USB dongle with ethernet for this to work correctly. For some reason the program didn't like my built in ethernet card.
@@goku25jasongohan23 Thanks for the answer. I also found out about it yesterday. I installed a different network adapter and it worked. Then I uninstalled and deleted the driver for the OneBoard adapter twice so that an old driver was installed and it works with that one too. So it must be a driver problem.
What do you mean by resources? Can i access windows and storage and how using wireguard
Awesome.
Please I will like to hire your expertise, how can I get in touch with you.
in Wireguard Log it said 'Invalid handshake initiation from xxxx' does anyone know the cause?
So to have multiclientes on my network i have to create a peer for each one?
consulta, y es rapida ambas conexiones? claro q ambos extremos tengo buena señal. He probado algunos vpn gratuitos como hamachi y radmin, sin embargo se satura la red por mas q tengo buena señal en ambos extremos, espero que el WG me vaya bien, slds
Nice! How about if you wanna have multiple clients? What Should change in this setup?
Excellent! Thank You so much!
Can you make a video for How to port forwarding on Model 5268AC?
Excellent 👍
I have two routers, one ac88u (PPPOE+DHCP) wan to pfsense (DHCP) pfsense lan to switch device, wireguard pc on pfsense lan area, do port forwarding twice, I use my mobile phone 5G to simulate outdoor connection, but it has not been able to Normal access to the network seems to be a problem with multi-layer port forwarding. I have tried to consult various information and tried many times, but still cannot solve it.
Can i use my pc both as server and client ? I don't have another computer to act as a server
Is it possible to setup two servers with the same configuration? eg. in case of one server's down, the other takes action.
Not that I know of. If you want to make a server a fallback, the easiest solution I can think of is to just have two profiles. But if you really want to only use one profile, you can have another server that is always online that acts as the gateway, and that gateway can check which server is up and redirect you to that server, althought I don't know exactly how to do it. Like what software to use.
Чувак, спасибо, самая понятная инструкция оказалась, все работает)
When I start the server, it creates the network adapter, but then it disappears and it says that it was unable to configure and then deactivates it. Can you help me?
same thing. It never will activate for me. i wish someone would make a video 30 min long of deep dive into all things about this with trouble shooting.
@@Presidentialrun2028 I couldn't fix it here and gave up. Another day I test Tailscale
You have to setup the IP adress of the sever to a different IP from the one that's on the main NIC you use
I configured the server and client as u said but on the client side when I activate the wireguard it is not handshaking. Pls tell why?
Is it possible to run this as a service, if it isn't by default already? I want to be able to use this before windows login, Is this possible?
very clear tutorial👍
самое понятное видео. спасибо! наконец настроил 2 микротика между собой
If I want to add another client, I have to edit the server file?
Hi thankyou for the tutorial, i have an problem, my router dont have this function "forwarding - Virtual server" can you help-me please? thanks
does this tutorial means that you have to create/edit connections every time you change of router ? Im saying this because at 3:32 you show your public IP address, but when you connect to another router it changes, right ?
Please anyone respond and thank you !
Mostly good video, but after installing the sharing for my ethernet, my PC connection is lost when I activate my Wireguard. I put the client on my android and it connects but again, whether I connect wireguard in windows or not, as soon as connected I lose my internet on my PC. I need more explanations on what to use for Allowed IPs and Addresses so I can figure this out. It's very confusing.
The IP of the vpn server is .105 or .1 ?
.105 is for the Physical Network Card, 1 is for the WG Virtual Network Card.
Please make video on split tunneling
Possible with dyndns hostname?
I did everything. The connection is successfully established. But I get an IP Not Received error. I am using a Static IP
まさに私が求めていたものです。
ありがとう。
excelent
I installed the wireguard according to the steps in the video but I couldn't ping, can you help me?
Maybe your firewalls settings are blocking the ports and you didn’t port forward correctly or your public ip address was put wrong. Double check those two things
Possible without public Ip??
No. When your in a remote network you need to look for the VPN. And so you need a public IP
GREAT 👌👍
Thank you! Cheers!
Excelent....
Não funciona!!! coloqueio o meu telefone como cliente e não funcionou !! Não tenho IP estatico , ele é sempre dinamico! Não sei onde foi buscar o ip 192.168.100.1 , configurou como assim?
I have done everything as shown in the video and I'm still not able to connect to the server.
Any help would be greately appreciated. I am connected to my university internet I tried to connect through my phone on data roaming but still nothing.
Cảm ơn bác nhiều em làm được rồi .
Very useful
Glad you think so!
Bagaimana cara sewa pport wireguard
643k subs and so low production value is crazy
you might of just leaked your own ip at 3:33
merci
not working for me
Try using "AllowedIPs = 0.0.0.0/0, ::/0" or "AllowedIPs = 0.0.0.0/1, 128.0.0.0/1" in the client configuration file to connect to the server. In my case, it worked, and I could connect to the Internet with tunneled traffic through my server.
If you have done everything according to the instructions and your connection still does not work, then most likely your provider provides you with Internet access through its local router and gave you a so-called "gray" or "private" ip address. In this case, it will be impossible to connect to your computer from the external Internet, because the provider blocks port forwarding on its router by default. In this scenario, you have ways to solve the problem: 1) Buying a "white" or "public" ip address allocation service from your provider, usually this service costs a couple of dollars per month. 2) Purchase a VPS/VDS server with a dedicated public IP address and configure your wireguard on this remote server.
@@senya_musicthank you for the info
why u can use indonesian language ?
nice
Thanks
This is an ephemeral concept, it will not work in practice
make a video on split tunnel open vpn
Thanks very Thanks for job ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤