So cool to see somebody else figure out the laser print & tape trick we've been using in our fine art for a little while now! A couple of tips that we've figured out that might help you in future laser decals: a little drop of dish soap on your fingers helps keep your adhesive sticky (keeps your skin oils from gumming it up). And we like using laminating sheets instead of adhesive tape, as it's a little thicker and has more adhesive. Happy making!
Such a gorgeous case. I'm sorry I only now discovered your channel and this video (or I would have insta-bought this case + mouse). I hope you can still reply, what is the liquid you use when sanding the PLA? I'm guessing it might just be water + dishwasher soap?
Those green LEDs you use to solder the Pis for your MacPi cases can be sold for about $9 a pack at Amazon. I'm currently designing a MacPi case STL file for the newly-released rPi 5 (inspired by your project), which includes a switch for the power button, and I made a new label for the case with Inkscape and Linearity Curve. The Apple logo was used as a placeholder for an icon I made for the label. Once I finish, If you like, I can PM you the STL file and the label. Maybe you can make a few improvements to the case design.
Beautiful-- and awesome with the decal. I had no idea that could work. Can you tell us exactly what you sprayed after you affixed the decal/tape? Some kind of varnish?
This is so amazing! I've been wondering since a long time how I can build a plastic beige case (or at least a good imitation thereof) and turns out you can use sprite. Also important to polish the recently printed pieces.
This is awesome! My only suggestion is that you put some black electrical tape on the inside of the case at the front right side to block out the red power LED from shining through the plastic 14:23
Great work! Im currently designing a universal measurement housing based on the atari XL line style. Im allready courious how my printer will handle all those many cooling vents along the facetted edges...
As a huge fan of the old Macintosh aesthetic, I'm super into this. Are the STL files still available? It looks like there isn't anything on your Etsy shop at this time.
Sure! You‘ll be able to spend your money by end of next week since I’m going to release an upgraded version of this case on my online shop! :-) I would be very happy to make one of these for you! thank you for your comment and kind words! Best Regards Kevin
Damn cool. Awesome attention to detail! Also, has anyone out there attempted to print a full on full size retro Mac case, i.e. for a Macintosh II series or Power Mac i.e. Power Mac 8500? I have an 8500 heavily upgraded but its case is brittle as hell... I'd like to either print myself or have some someone print for me a new case for it so I don't have to be so careful with it.
Dude, this is freaking awesome. I wish I had those skillz. I want to make a life size Macintosh classic or se to fit a 7' or 10" LCD with a pi 4, but I can't model and don't think it would fit on an ender 3 to print lol
Thank you very much bro! Actually I’m having the same idea to print a life size Mac I’ll release a video soon :-) should be also possible on the ender 3 if you split the parts so that those fit on the buildplate and glue them together in the end 😃
@@KevinNoki if you make a render and subsequent file for printing, cany you let me know. I'd love to make it. I've been looking at Amazon for the r-pi lcd kits between 7-10"
9:40 - I have 5 different soldering stations (from small to large, from brands like the reputed Weller to chinese Yihua), and I NEVER have the situation of a soldering tip exiting a stand). I honestly think it is a bit dangerous... But then again, who hasnt burnt himself once...
what are you running for macintosh classic emulation? Sheepshaver or something else? I remember giving up on macintosh emulation at the time of sheepshaver due to things like no usb or serial support. Would be interested in what you are using :)
Hi Matt, I’m using sheepshaver ARM version on rasbian you can find your USB drive through the Unix partition or set it up as a shared folder i guess that should work too but I’m not sure yet. Serial support might be difficult
@@KevinNoki but its sadly just emulation would be really nice if someone would port it to raspberry pi natively even if then no external software works
Oh one other Question I've ben looking for a raspberry pi laptop 3dprinted case online but I had no luck. And I don't have Good 3d modeling skills. When you make the shell for the classic laptop can you send me a dow load link on my gmail or discord or something? Bucuse I'm getting really tired of searching and all I find is desktop shells. It would help me for my project of making my dream laptop thanks. I can send the blueprints that I drew so it could be more easy for you to make it and you could agust the size to make the rasbery pi fit it in with the kind of ports I would like. But the internals I could do I just need help with the case.
Hi! Thanks for your Comment currently there are only versions available that weren’t polished. 3D Printed lines are visible, here the link to my shop: www.etsy.com/shop/NokiOne
@@KevinNoki Hi! I am also interested in buying one! I have a Mac Color Classic at home, but would love this little guy. Please put me on your list when they are available. Thank you. You can email me at: mraroid@gmail.com
Thank you Jamie! Check out the video from the UA-camr „Novaspirit Tech“ he’s explaining it how to install OS9 on Raspberry Pi -> It works great! sound as well!
@@KevinNoki Do you plan to sell that wireless retro 1984 mouse? I have been looking for a similar product to buy. (Maybe a little bit less original one with two buttons similar to C64 mouse and probably with a scroll). I must say that RAL 7044 made my day. Thanks for that. I've already ordered some Ral 7044 spray paints after watching this video.
hey... suuuuupper 👍👍👍👍🤣🥰🥰🤓 kannst du uns deine 3d druck datei, für das pi gehäuse geben? zb. mit einem link unter das video... 👌 thanks from deutschland. 🙋🏻♂️
Hi Martin freut mich das es dir gefällt! Werde die kommenden Tage die STLs hochladen, da ich noch ein paar Verbesserungen vornehmen muss. thanks ebenfalls from deutschland :-)
STL FILES ALSO AVAILABLE NOW!
Etsy shop: www.etsy.com/de/shop/NokiOne
RetrobrewDE is currently not selling on Etsy
did u remove it from etsy? where can we get the stl?
I really want to download the file, someone know where I can find it?
Really cool! Could you point us to where these files are now?
So cool to see somebody else figure out the laser print & tape trick we've been using in our fine art for a little while now! A couple of tips that we've figured out that might help you in future laser decals: a little drop of dish soap on your fingers helps keep your adhesive sticky (keeps your skin oils from gumming it up). And we like using laminating sheets instead of adhesive tape, as it's a little thicker and has more adhesive. Happy making!
Cool! thanks for the advice. I’ll try it on my next projects! :-)
Such a gorgeous case. I'm sorry I only now discovered your channel and this video (or I would have insta-bought this case + mouse). I hope you can still reply, what is the liquid you use when sanding the PLA? I'm guessing it might just be water + dishwasher soap?
That is seriously the coolest Hackintosh ever. ❤️
Thank you!
You sand so fast, you don't need a belt sander! I'm impressed.
Made my day 😂 to be honest the sanding part ist just faster. FYI since last year I’m a happy owner of a belt sander 😃
Those green LEDs you use to solder the Pis for your MacPi cases can be sold for about $9 a pack at Amazon.
I'm currently designing a MacPi case STL file for the newly-released rPi 5 (inspired by your project), which includes a switch for the power button, and I made a new label for the case with Inkscape and Linearity Curve. The Apple logo was used as a placeholder for an icon I made for the label. Once I finish, If you like, I can PM you the STL file and the label. Maybe you can make a few improvements to the case design.
Id buy one of those already built from you! Amazing work.
Not read all the comments so it might well have been said before but… Apple Pi, surely!?
Kevin, any chance you'd make the CAD files to this available for the public?
Yes please. Really enjoyed watching this creative video all the way through.
Wow that's just a stunning build - the transparent decal was esp cool!
Thank you very much! :-)
The music is funky fresh! Awesome video
Beautiful-- and awesome with the decal. I had no idea that could work. Can you tell us exactly what you sprayed after you affixed the decal/tape? Some kind of varnish?
Richard Peacock Thank you my friend! I sprayed a few layers of clear coat to prevent a detach of the logo :-)
@@KevinNoki did you use a laser or inkjet printer?
@@KevDoy sorry for my late answer! I saw your question just right now. This process works only with Laserprinters
@@KevinNoki thank you! Any chance of releasing the STLs? 😇
Amazing! 100% Perfect for Retro Fans.
Thanks :-)!
LOVE the creativity and execution!!!
Thank you very much :-)
This is so amazing! I've been wondering since a long time how I can build a plastic beige case (or at least a good imitation thereof) and turns out you can use sprite. Also important to polish the recently printed pieces.
especially love seeing the caliper and paper step of the design process thank you
Thank you! :-)
That was pretty impressive to watch.
Thank you ! :-)
I wanna make a vintage Mac case/shroud for my M2 Mini!
Great idea! I made one for the Mac Studio a while ago unfortunately I don’t own a Mac mini m2 but it should look amazing :-)
Dudeee this looks amazing! I'd love to have one of these myself! Great work!
Thank you so much! These will be available again soon :-)
6:46 this tape trick is so awesome! Thank you for this video!
this is super cool! good job and congratulations on the great outcome!
Suchipi thank you very much!!
Would love to buy the STL for this if possible. I see the Etsy store is down
Hi Dylan, the STL is now available on Etsy!
Regards
Kevin
Super Awesome, how did you get a Macintosh to work on a Raspberry Pi I have tried but no luck.
Thank you! Try Sheepshaver :-)
Could you explain that "decal making" process? Is that a special paper? or tape? How does that work?
Ian McCullough Decal is actually a special foil that you can print on but I did mine with a simple Laserprinter, Tape and Water :-)
Incredible work u have done! Perfect, congrats!
Iván Muhlenberg thank you so much Iván I really appreciate it!
Saw this on Reddit, super cool!
yanksrock1000 same
Great job on this!
Thanks Michael!
This is awesome!
My only suggestion is that you put some black electrical tape on the inside of the case at the front right side to block out the red power LED from shining through the plastic 14:23
awesome work, stunning
any chance to get these files to reproduce your cute case for private purposes?
Thank you very much! I’ll try to release it asap
Wait wait: 6:52 what kind of paper are you using? =D
Great work! Im currently designing a universal measurement housing based on the atari XL line style. Im allready courious how my printer will handle all those many cooling vents along the facetted edges...
Very cool I think it will be Awesome! :-)
Will my low profile ice tower fit in this case
With some little adjustments it should fit :-)
Y los STL ?
Cool project!
Thank you !!
really cool construction!
Is there a 3D project for the case to hold a Raspberry Pi 5?
Also could you please create the macintosh pi for the raspberry pi 5 because it’s a much more capable machine and I’m planning on 3D priming the files
As a huge fan of the old Macintosh aesthetic, I'm super into this. Are the STL files still available? It looks like there isn't anything on your Etsy shop at this time.
Impressive video, fantastic! Which design program did you use, it looks very clear. 👍
Err, this is wicked… any chance you could make more complete kits and take my money?
Sure! You‘ll be able to spend your money by end of next week since I’m going to release an upgraded version of this case on my online shop! :-) I would be very happy to make one of these for you! thank you for your comment and kind words!
Best Regards
Kevin
etsy.me/3kwrnAT
Damn cool. Awesome attention to detail! Also, has anyone out there attempted to print a full on full size retro Mac case, i.e. for a Macintosh II series or Power Mac i.e. Power Mac 8500? I have an 8500 heavily upgraded but its case is brittle as hell... I'd like to either print myself or have some someone print for me a new case for it so I don't have to be so careful with it.
any chance of the STL files becoming available again?
This gives me Nostalgic about a Mac OS 9.
looking forward to buying this case, good job!
Thank you very much Andre :-) few more days and it will appear in my Onlineshop
@@KevinNoki is it there yet?? : )
Almost! Waiting for some Parts which are needed to build this case then I can start! Thanks for your patience :-)
etsy.me/3kwrnAT
Which software did you write on sd card ?
The OS is Raspbian the Software is SheepShaver
Dude, this is freaking awesome. I wish I had those skillz. I want to make a life size Macintosh classic or se to fit a 7' or 10" LCD with a pi 4, but I can't model and don't think it would fit on an ender 3 to print lol
Thank you very much bro! Actually I’m having the same idea to print a life size Mac I’ll release a video soon :-) should be also possible on the ender 3 if you split the parts so that those fit on the buildplate and glue them together in the end 😃
@@KevinNoki if you make a render and subsequent file for printing, cany you let me know. I'd love to make it. I've been looking at Amazon for the r-pi lcd kits between 7-10"
@@adonian Sure!
Wow Nice Project, what printer do you have?
Thank you! I used an Ender 3 for this project
9:40 - I have 5 different soldering stations (from small to large, from brands like the reputed Weller to chinese Yihua), and I NEVER have the situation of a soldering tip exiting a stand). I honestly think it is a bit dangerous... But then again, who hasnt burnt himself once...
what are you running for macintosh classic emulation? Sheepshaver or something else? I remember giving up on macintosh emulation at the time of sheepshaver due to things like no usb or serial support. Would be interested in what you are using :)
Hi Matt, I’m using sheepshaver ARM version on rasbian you can find your USB drive through the Unix partition or set it up as a shared folder i guess that should work too but I’m not sure yet. Serial support might be difficult
Wie bringst du das Mac OS auf den Pi, bzw. lauffähig, von ner 68000er cpu auf arm?
Really cool please upload it somewhere
Beautiful work!!
That's some nice work right there!
spooforbrains thank you my friend!
Un Súper Invento!!!! 👍🏻👍🏻👍🏻👍🏻😄
Muchas gracias :-) !
Now we just need macos 9 for raspberry pi
Emulation is possible with sheepshaver :-)
@@KevinNoki but its sadly just emulation would be really nice if someone would port it to raspberry pi natively even if then no external software works
@@KevinNoki great work that case looks amazing i really love the old design language of apple the new aluminum looks great too though
Sure that would be amazing!
How could you emulate the 68040 and Mac OS 9?
Hello I saw you your own made mac case its great!! i want to buy your case without raspberry Pi thank you
Hey why are there no more stl files and where can I get them?
Can you 3d print a retro case but in laptop form?
Sure I’ll put it on my list for my future videos :-) Have a great day!
@@KevinNoki ok thanks I'll subscribe so I can see it thanks
Oh one other Question I've ben looking for a raspberry pi laptop 3dprinted case online but I had no luck. And I don't have Good 3d modeling skills. When you make the shell for the classic laptop can you send me a dow load link on my gmail or discord or something? Bucuse I'm getting really tired of searching and all I find is desktop shells. It would help me for my project of making my dream laptop thanks. I can send the blueprints that I drew so it could be more easy for you to make it and you could agust the size to make the rasbery pi fit it in with the kind of ports I would like. But the internals I could do I just need help with the case.
Not available under the listed link, can the 3d model be purchased and self printed?
Hi! Thanks for your Comment currently there are only versions available that weren’t polished. 3D Printed lines are visible, here the link to my shop: www.etsy.com/shop/NokiOne
@KevinNoki “RetrobrewDE is currently not selling on Etsy”
Will you please sell it again?
Where is the resistor for that diode?
Hi John its soldered to the LED
Your work is awesome! Any chance you’d sell the case/mouse? I’d definitely purchase both if you had an online shop :)
Thank you very much!!! I'm producing both products right now, the shop will be online soon :-)
@@KevinNoki Hi! I am also interested in buying one! I have a Mac Color Classic at home, but would love this little guy. Please put me on your list when they are available. Thank you. You can email me at: mraroid@gmail.com
What bgm are u using
are the files avalibe to be bought?? i neeeeeeed this!!!!
Yes my shop is going to be online next week again.
awesome! pm8500 was my favorite tho. btw can you share how you installed macos 9 on your raspberry pi? everything works well? does sound work?
Thank you Jamie! Check out the video from the UA-camr „Novaspirit Tech“ he’s explaining it how to install OS9 on Raspberry Pi -> It works great! sound as well!
Kevin Noki Thank you so much!!
how did you get os 9 to run on the pi?
Hi, I'm using the SheepShaver emulator
Genius! I loved!
Thank you very much! And happy Easter :-)
Instant buy!
Soon available again :-) thank you 😊🙏
@@KevinNoki Do you plan to sell that wireless retro 1984 mouse? I have been looking for a similar product to buy. (Maybe a little bit less original one with two buttons similar to C64 mouse and probably with a scroll). I must say that RAL 7044 made my day. Thanks for that. I've already ordered some Ral 7044 spray paints after watching this video.
Will a usb floppy drive work with the emulator?
That’s exactly what I was also asking myself, so I ordered a usb-floppy drive. It should arrive the next days then I’ll give you an update!
Are you ever gonna sell these again🥺🥺🥺
Yes I’m working on it. The Shop will be online soon :-)
Broadcom BCM2711 quad-core SoC の1.5GHz 8GB RAMならMotorola MC68040 40MHz 32MB RAMのエミュレートぐらいはなんとかなるのでは無いか？もしかしたらIBM PowerPC 750CXe 500MHz 256MB +ATI RAGE 128 Turbo 16MB AGPx2も可能か？
hey... suuuuupper 👍👍👍👍🤣🥰🥰🤓 kannst du uns deine 3d druck datei, für das pi gehäuse geben? zb. mit einem link unter das video... 👌 thanks from deutschland. 🙋🏻♂️
Hi Martin freut mich das es dir gefällt! Werde die kommenden Tage die STLs hochladen, da ich noch ein paar Verbesserungen vornehmen muss. thanks ebenfalls from deutschland :-)
Can i buy this now? 😢 pi 4B
You can’t Buy Just Make A Case For pi Computer and That it
You are not running MacOS 9 directly, right? I guess you are using some kind of simulator... correct?
Yes, I used for this project the Sheepshaver Emulator.
Cooles Projekt! Wäre es möglich, dass du die 3D Datei veröffentlichst? Oder würdest du so ein Case auch Verkaufen? :D
Hey Kevin I just sent you an email, not sure if you got it cause once I sent it I got an error script. Let me know if you got it.
so just need a bare metal Mac emulator for the Pi
Real Mac Mini 🤣
Background music way too loud and annoying. Cute retro style MAC emulator.
Thanks for your comment! I agree with you I won’t add any background music in future videos
I want one soooo bad
Kevin Noki thanks
Clash with Kayden! Me too 😩
good job, but i would love to hear you discuss your process rather than listen to music.
Thank you so much for the feedback! I totally agree with you, in my next video I’m going to improve that.
I like the music too though
The prices on eBay are so F*ED up.
I guess that's chumacalit an Apple Pi
Apple Pi.........
🔇🔇🔇🔇🔇🔇
OMG! YOU ARE MY MENTOR!!!!! NICE WORK
Thank you ! 😀🙏🏻