Це відео не доступне.
Перепрошуємо.
Setting up your FT-891 for SSB Mode plus RT-Systems.
Вставка
- Опубліковано 23 гру 2022
- The Yaesu FT-891 is a small, but mighty, HF plus 50 MHz, full-featured and very capable rig, with a cost point that should make it a top contender for hams on a budget.
Because of it’s small size, where many larger rigs can put many controls up front, the FT-891 has to keep its secrets hidden. This video digs out those secrets so you can use your rig to its, and your full potential.
The standard hand-mic that comes with this rig is the Yaesu FT-891, so the settings described in this video focus on use of those settings.
Here is a list of all settings described in this video
Functions:
FUNCTION 2 - AGC, set to AUTO
FUNCTION-2 - MTR, set to ALC
REC SETTING - MEM and CH1 - CH5
Menu items:
01-03 - AGC SLOW DELAY: 3000 msec
*11-01 - SSB LCUT FREQ: 100 Hz
*11-02 - SSB LCUT SLOPE: 6db/oct
*11-03 - SSB HCUT FREQ: 3000 Hz
*11-04 - SSB HCUT SLOPE: 6db/oct
11-05 - SSB MIC SELECT: MIC
11-07 - SSB BFO: AUTO
11-09 - SSB TX BPS: 100-3000
13-01 - SCP START CYCLE: 3sec
15-01 - EQ1 FREQ: 200
15-02 - EQ1 LEVEL: -8
15-03 - BWTH: 2
15-04 - EQ2 FREQ: 1100
15-05 - EQ2 LEVEL: 5
15-06 - EQ2 BWTH: 3
15-07 - EQ3 FREQ: 2300
15-08 - EQ3 LEVEL: 7
15-09 - EQ3 BWTH: 4
16-01 - HF SSB POWER: (YOUR CHOICE), SET YOUR OUTPUT POWER FROM 0-100 W
16-07 - SSB MIC GAIN: 30 (your mileage may vary)
05-11 - REC SETTING: ENABLE
* These menu settings were in the original recording, but were inadvertently edited out during processing. Sorry…
Chapters:
00:01 Introduction
00:38 Mostly Receive
03:29 Mostly Receive
07:13 Voice Channel Recording and Playback
10:20 Screen Display
12:07 RT-Systems Overview
18:26 End Notes
Thanks for watching. Please remember to Like, Share, Comment and Subscribe.
73 de Tom, ND3N
Went along and ordered a FT-891, your videos are among the best on this rig. Once again thank you.
Thanks…
Just got my FT-891 and your video has helped me tremendously. Thanks and keep up the good work.
Will do
Great video, looking forward to seeing some more on the FT-89. Thank you
More to come!
Tom, Thanks again.
I drove down to R&L this morning. I registered the radio for the warranty and immediately watched this video and set it up. 73, K8STU
Thanks for video and your time.new subscriber from uk 🇬🇧
Thanks
Thomas, Very nice job sharing the menu system and some of the settings. I recently purchased the Ft-891 and very happy with it. It's videos like these that I keep spending time reviewing to better help understand the radio and its features and settings. Thanks and 73.....KI5MD
This is a great video series for any FT-891 user. Thanks for putting it together!
I'm keeping this video for when I buy it later this year :-)
Hello Tom, thank you for the video and the fantastic settings (by menu order btw) in the description. Cut, paste print, saved and bookmarked!
Awesome, thank you!
Thank you man for taking the time to research this and post it. It is definitely helping me thank you so much
Thank you for all your research to get this info to your viewers!
My pleasure!
great video. love the rocky horror clip!
Glad you enjoyed it
Good tutorial on settings. Rocky Horror excerpt .... your'e a funny Ham. I'll get that software but it looks like long time to learn & use. Thanks for posting.
Actually, RT-Systems is very intuitive and doesn’t take much effort to use. They also have a really good customer service that will talk you through any problems you’re having…
Thank you. Great info!
Glad it was helpful!
Thanks ! This is very helpful.
Glad it was helpful!
PRC on or off (tx audio processor) is channel setting specific with memories, yet RT systems has no column for PRC in the memory channel editor screen (not in radio settings either). I reported this to them and I hope they add it soon.
I don’t think I’ve seen that in any RT Sys. S/W…. Perhaps because it’s something that is dynamically set to conform for each individual voice. But it would be nice to be able to have a way to easily reload them in case of a required reset…
Nice video. I am using the FT-891 with RT Systems. I frequently use FT8 and I always have to remember to change the Width to 3000 when I switch to data mode. I don't see where I can set that up in RT Systems. 73
Thank you sir.
Most welcome
💎👍
thank you!!!!
You're welcome!
@@ND3N 73 from Lu1fcq!!!
Thank you, very helpful! 73 de W3LAM
Glad it was helpful!
Very helpful….VK6BP
Glad it was helpful!
Thanks for the great video. Most informative one I've found for the 891. kf0ntp 73
Glad it was helpful!
I narrowed the band and I heard myself on the Maui sdr receiver with S7 using 80 watts at 5:00 AM UTC 02/28:2024. Thank you for the advice. However, the EQ settings did not work for me. It’s better to turn it off. Why? Can you please share? Thank you.
Wondering if you can help me out started changing the menu but now I can’t move it anymore. It’s like it’s locked any ideas of how to fix it?
Is this information available to print?
I assume you mean the menu settings. They are all listed in the video description where you should be able highlight, copy, and paste into any text editor and print from there.
Great video! de W2CSI
Thanks!