Fxbb street bob: raise the gas tank and replace the headlight prototype.

Поділитися
Вставка
  • Опубліковано 4 жов 2024
  • Fxbb street bob-raise the tank and replace the headlight, protopyte made in home.
    music:
    Dutilleul: cloudZzz
    Dutilleul: Dark Room Full of Lonely People
    Tullio: Poolside
  • Авто та транспорт

КОМЕНТАРІ • 71

  • @shadowman5088
    @shadowman5088 4 роки тому +1

    Just did mine on my 2020 softail streetbob 2 1/2 inches..amazing the difference in look

    • @MrGeorgexorion
      @MrGeorgexorion 4 роки тому +1

      Hey what website did you get the tank lift from

    • @shadowman5088
      @shadowman5088 4 роки тому +1

      Defcon orion I bought the sportster ones on amazon ,and just made the top hole bigger,and picked up a long bolt from Home Depot ..literally 5 minute job

    • @DonCheach13
      @DonCheach13 4 роки тому

      Did you loose any gas mileage after you did it? In other words are you now not utilizing your full tank due to the increase in height.

    • @shadowman5088
      @shadowman5088 4 роки тому

      DonCheach13 I dropped it back down to original...didn’t ride it enough to recognize any change. Once I put a sissy bar on the bike,it just wasn’t looking right to me

  • @motocatador6255
    @motocatador6255 4 роки тому

    Vert nice look awesome , head light new position like old school chopper well congrats, my is 2018 there is no many accessories, well look to you happy Holiday.

  • @CraigSmith568
    @CraigSmith568 5 років тому +1

    Love the tank lift.

  • @justincase6908
    @justincase6908 5 років тому +1

    hi any updates on a production model? some black powder coat and it looks ready to go! love the look.

  • @kcfox3130
    @kcfox3130 5 років тому +5

    the small tank don't suit the bike needed to be bigger fill the gap between the tank & the seat give it a longer range & old style speedo

    • @Antovit22
      @Antovit22  5 років тому

      kc fox
      I solved the problem, you'll see it soon

  • @rebel_ltz
    @rebel_ltz 5 років тому +2

    With this tank lift can you do a full wire tuck like on a sportster? It would be great to eliminate the plastic piece from under the tank.

    • @Antovit22
      @Antovit22  5 років тому

      Fruice week you will see progress, follow me.

  • @MS82_234
    @MS82_234 Рік тому

    I'm thinking of lifting my gas tank on harley street bob. How much did u lift yours in this video?

  • @Rivv96
    @Rivv96 5 років тому +6

    This might be a stupid question but : why raise the tank ?

    • @pikaprd
      @pikaprd 5 років тому +3

      Just for the looks

    • @BK-rt7wi
      @BK-rt7wi 4 роки тому

      Also gives room for top bolts. You have to undo the tank otherwise to check if they are tight periodically.

    • @mementomori4051
      @mementomori4051 4 роки тому

      Looks cool

  • @StreetBobberVlogger
    @StreetBobberVlogger 6 років тому +2

    Nice! Did you buy the tank lift or prefab yourself? 🤘

    • @Antovit22
      @Antovit22  6 років тому +1

      StreetBobberVlogger
      Ciao, made it, but this is just a prototype, coming soon .......... follow me .........

  • @robbaker9817
    @robbaker9817 3 роки тому +1

    $20 powder coat would be awesome

    • @Antovit22
      @Antovit22  3 роки тому +1

      watch the other video✌🏼

  • @sportgliderider
    @sportgliderider 5 років тому

    Like the tank lift, still thinking about the headlight.

  • @marcdavis6719
    @marcdavis6719 Рік тому +1

    I need the link to the floorboards plz?

  • @whatwazth4t
    @whatwazth4t 5 років тому

    Where you able to fill tank as munch. Or does it over flow a bit sooner

  • @StreetBob-tn1ed
    @StreetBob-tn1ed 4 роки тому

    how much range did you lose off the tank raising it

  • @pjross570
    @pjross570 4 роки тому

    Please where can I order one for my 2018 Street Bob? Thanks, great video.

    • @Antovit22
      @Antovit22  4 роки тому

      PJ Ross
      ua-cam.com/video/Sw8V0URC1pQ/v-deo.html
      there are the dimensions

  • @drainmonkeys385
    @drainmonkeys385 2 роки тому

    Hmmm.. looks like you should send to the shop and $300 minimum for that job,..,😂

  • @skillet1033
    @skillet1033 2 роки тому

    Lightly sand and paint

  • @yamayari8351
    @yamayari8351 3 роки тому

    Where did you purchase the lift kit for the tank?

  • @pjross570
    @pjross570 4 роки тому

    Tanks

  • @infiniteg7852
    @infiniteg7852 3 роки тому

    Where did you get the pieces for the headlight extension? I couldn’t change mine with the Memphis shades block . Thanks

    • @Antovit22
      @Antovit22  3 роки тому +2

      I'm sorry I had them made by my blacksmith

  • @SD_PUBLIC_ENEMY
    @SD_PUBLIC_ENEMY 5 років тому

    Is that. 2” lift?

  • @pjross570
    @pjross570 4 роки тому

    Does the gas gauge read the same after install?

  • @Guitarsandcats
    @Guitarsandcats 6 років тому

    Hey Antonio, are you satisfied with the Rothewald Tool set?

    • @Antovit22
      @Antovit22  6 років тому

      FXBB MT
      Absolutely yes

  • @dianedownie5951
    @dianedownie5951 Рік тому

    Why??????

  • @wordtothejoel
    @wordtothejoel 5 років тому

    Is this lift kit available? Also, did you have to extend hoses?

    • @Antovit22
      @Antovit22  5 років тому

      Joel Monroy
      hello, it's all done by me, soon I will publish a new project more beautiful.
      I have not extended anything.
      Follow me

    • @wordtothejoel
      @wordtothejoel 5 років тому

      @@Antovit22 Thank you for the reply. Great job! Please let me know when this is available and I will gladly buy one. Thanks again.

    • @chayaphonklinthong1030
      @chayaphonklinthong1030 5 років тому

      @@Antovit22 Have you made one for sale already?

    • @Antovit22
      @Antovit22  5 років тому

      Chayaphon Klinthong
      No🤷🏻‍♂️

  • @morganfidelityassociates8278
    @morganfidelityassociates8278 5 років тому

    where did you get that license plate relocation bracket?

    • @Antovit22
      @Antovit22  5 років тому

      Morgan Fidelity Associates
      Home made!

    • @tomwidlake3569
      @tomwidlake3569 4 роки тому

      It’s from thunderbike 😂

  • @a6saddah
    @a6saddah 4 роки тому

    What is the name of the stand under your bike ?

    • @Antovit22
      @Antovit22  4 роки тому +1

      www.motea.com/it/moto-ponte-sollevatore-constands-mid-lift-xl-cric-idraulico-500kg-in-arancione-303880-0

    • @a6saddah
      @a6saddah 4 роки тому

      @@Antovit22 thank you , I have street Bob too 🙂

    • @Andy_FXBB
      @Andy_FXBB 3 роки тому

      Does the lift have wheel brake?

  • @siegmundkrug6950
    @siegmundkrug6950 5 місяців тому

    Diese unlakierten Teile sehen ja schlimm aus

  • @skillet1033
    @skillet1033 2 роки тому

    Next time assemble then tighten

    • @Antovit22
      @Antovit22  2 роки тому

      thanks friend for the advice

    • @Antovit22
      @Antovit22  2 роки тому

      thanks friend for the advice

  •  10 місяців тому

    But why

  • @calleblomquist
    @calleblomquist 4 роки тому

    before looks much better, dont like the silver

  • @matthiasz8061
    @matthiasz8061 6 років тому +1

    Sorry, aber wie man ein schönes Bike derart entstellen kann ist unbegreiflich !

    • @Antovit22
      @Antovit22  6 років тому

      Matthias Z
      Gesichtspunkte, aber ehrlich gesagt ist es ein Prototyp.

  • @rebel_ltz
    @rebel_ltz 4 роки тому

    What plate holder do you use?

    • @Antovit22
      @Antovit22  4 роки тому

      Tom rebel
      Thunderbike 💪🏼 I changed bikes if I want to sell it