Works great - thank you for sharing. One issue is that if you decide later to move the model to a different folder (which you can do on the transmitter within the model select functionality), the checklist note file does not move with it. I needed to go back into bootloader mode and move the file from the old folder to new folder. Small annoyance that can be avoided by building a good folder list and getting the model in the best folder to start.
That's a very good point. Still the first implementation of it. Might be further improved in the future. But I do say they are moving in the right direction.
@@all_rcThank you for replying. Not exactly. If you go to the 00:00:53 mark on the video, to the left of the checklist, there is a graphic of your transmitter showing the switches and throttle positions. That graphic is what I was referring to. I have seen it on the X20 series as well, so I am not sure if the X18 series has that functionality or not.
Ah. I don't run an X18 but it's the standard start up check list if a switch is in a non default position or your throttle is on. Try turning on your transmitter or change models while your throttle is not fully down. You should get a throttle warning and that graphic should pop up. Maybe the X18 doesn't have it?
@@all_rc I get the warnings, so that's not the issue. I do appreciate your trying to help. I'll just chalk it up to the X18 series not having it. Thank you for trying! Keep up the great videos too! They have been a huge help with Ethos!
I just called a friend who has the x18 and he says it doesn't come up on his radio as well. I guess they omitted it on the 18 since the screen is smaller?
Were you doing the update through Ethos Suite? That is usually the best way to update your transmitter. I did a video on that: ua-cam.com/video/v5bRlZU6cy0/v-deo.html
Works great - thank you for sharing. One issue is that if you decide later to move the model to a different folder (which you can do on the transmitter within the model select functionality), the checklist note file does not move with it. I needed to go back into bootloader mode and move the file from the old folder to new folder. Small annoyance that can be avoided by building a good folder list and getting the model in the best folder to start.
That's a very good point. Still the first implementation of it. Might be further improved in the future. But I do say they are moving in the right direction.
Thank you for sharing this! Very helpful. Question: How would I get the graphic of the transmitter showing the switches? I have an X18S.
Try this. Press the SYS, go to HARDWARE, and go to HARDWARE CHECK. Is that what you mean?
@@all_rcThank you for replying. Not exactly. If you go to the 00:00:53 mark on the video, to the left of the checklist, there is a graphic of your transmitter showing the switches and throttle positions. That graphic is what I was referring to. I have seen it on the X20 series as well, so I am not sure if the X18 series has that functionality or not.
Ah. I don't run an X18 but it's the standard start up check list if a switch is in a non default position or your throttle is on. Try turning on your transmitter or change models while your throttle is not fully down. You should get a throttle warning and that graphic should pop up. Maybe the X18 doesn't have it?
@@all_rc I get the warnings, so that's not the issue. I do appreciate your trying to help. I'll just chalk it up to the X18 series not having it. Thank you for trying! Keep up the great videos too! They have been a huge help with Ethos!
I just called a friend who has the x18 and he says it doesn't come up on his radio as well. I guess they omitted it on the 18 since the screen is smaller?
i was trying to upload the new version but the ethos website says page not found
does anyone else have this problem?
Were you doing the update through Ethos Suite? That is usually the best way to update your transmitter. I did a video on that: ua-cam.com/video/v5bRlZU6cy0/v-deo.html
it didn't work through ethos either but i'll try again tonight to make sure