FINALLY! Monopods That Work Like Monopods Should from iFootage!
Вставка
- Опубліковано 26 кві 2019
- OK, maybe I'm a bit TOO excited about this monopod, but after using a TON of them, this is my all-time favorite monopod, battle-tested at NAB.. It ticks all the boxes: ✅ Build quality ✅ Options ✅ Stable ✅ Design ✅ Good company. Apologies for the few glitches in the video - the Tech gods are playing with me this week. :) bit.ly/SubscribeToBasicFilmmaker
#basicfilmmaker #monopod #iFootage
This is NOT just another monopod!
I met up with iFootage at the 2019 #NABShow, and Ian was kind enough to lend me one of their iFootage A180 Cobra II monopods - the aluminum version (they have both a carbon and aluminum version).
My initial thoughts were, "OK, another fancy monopod. I'll check it out and return it when I'm done." I couldn't have been more wrong about this.
It's not only a show stopper, literally 20 people stopped me to ask what I had at NAB, but is the best and most functional monopod I have ever used, and the price point is incredible.
EVERYTHING on this unit screams high-quality and precision engineering, and you can tell these guys really thought everything through, from the o-rings on the slides, the smooth machined aluminum, the stainless springs and screws, the molded all around rubber footings, hard stops on the legs, patented quick release plate, the ability to make this a mini tripod in seconds, a 71 reach, and the list goes on and on.
I HIGHLY recommend this if you're looking for an excellent monopod for your videos.
Minipod (hi-hat) here: Amazon: geni.us/k045CEt
Aluminum:
bhpho.to/2Gzoyv6
Amazon: geni.us/iFootageCarbonMonopod
Carbon:
bhpho.to/2GOXNmH
Amazon: geni.us/iFootageCarbonMonopod
iFootage Products Website: www.ifootagegear.com/products/
----------------------------------------------
THE CAMERA SIDE:
----------------------------------------------
Canon 5D:
Amazon: geni.us/Lu9x
bhpho.to/2GXbUoz
Pro Batteries:
Amazon: geni.us/ofBx
bhpho.to/2A9lfZv
Tripod:
Amazon: geni.us/FJ3sz
bhpho.to/2V0TRZK
Tripod Head:
Amazon: geni.us/Manfrotto502VideoHead
bhpho.to/2JhjUmd
Quick Release Plates:
Amazon: geni.us/3d1KCTn
bhpho.to/2PpuNbb
----------------------------------------------
AUDIO:
----------------------------------------------
Rode NTG-3:
Amazon: geni.us/RodeNTG3Shotgun
bhpho.to/2HxxL75
Deity Mic:
Amazon: geni.us/DeitySMIC2
bhpho.to/2OqwGkf
Zoom H6 Recorder:
Amazon: geni.us/ZoomH6AudioRecorder
bhpho.to/2AWDfsB
Headphones:
Amazon: geni.us/bBCC
bhpho.to/2Pu1hBr
Sound Blankets:
Amazon: geni.us/f3DFr
----------------------------------------------
LIGHTING:
----------------------------------------------
Aputure Tri-8 Kit:
Amazon: geni.us/AputureTri8LEDs
bhpho.to/2H0IHJk
Pulsar Spotlight:
Amazon: geni.us/FalconEyesP5TDSpot
Light Stands:
Amazon: geni.us/LightStands2xStainless
Wall Mounting Brackets:
Amazon: geni.us/WallMountBoomArm
C-Stand:
Amazon: geni.us/10FootCStand
----------------------------------------------
BACKGROUND:
----------------------------------------------
Fake Brick Tapestry:
Amazon: geni.us/3S7NA7
----------------------------------------------
EDITING:
----------------------------------------------
Adobe Premiere Pro:
bit.ly/AdobeCCFull
----------------------------------------------
OTHER:
----------------------------------------------
Captions:
www.rev.com/blog/coupon/?ref=...
Analyzing UA-cam Videos:
VidIQ:
TubeBuddy: www.tubebuddy.com/thebasicfil...
See gear at www.kit.co/basicfilmmaker
----------------------------------------------
Training:
----------------------------------------------
www.basicfilmmakeruniversity.com
----------------------------------------------
Credits
----------------------------------------------
Music by Premium Beat: bit.ly/PremiumBeatMusic
----------------------------------------------
Connect with me here:
----------------------------------------------
bit.ly/BFM-UA-cam
bit.ly/BFM-FBook
bit.ly/BFM-TWITTER
bit.ly/BFM-INSTAGRAM
bit.ly/BFM-UNIVERSITY
----------------------------------------------
Copyright (c) 2019 Basic Filmmaker
All rights reserved.
----------------------------------------------
Note that some of these links are affiliate links and help keep the channel going. Thanks for your support, as it really helps offset the costs!
*Yep! You can tell when I'm really excited about something, and this iFootage monopod is THE ONE for me. Apologies for the few glitches in the video - I think I made the Tech Gods mad. 😎 How's your monopod rate compared to this one? Any cool ways you use yours that are unique? Let me know in the comments! And, THANK YOU for subscribing to the channel and for your continued support!*
I was going to comment on the audio glitches. I think we are all used to seeing clumsy jump-cuts on youtube, but the audio pops just need to be cross-faded out. Love the enthusiasm, lol!
True that Daniel! I was going to either re-shoot or smooth out all the glitches, re-render and upload, but I ran out of time and I thought, what the hell. I ain't perfect, and people should see that. But yes, a crossfade would have been appropriate. The problem was the card was glitching, and hard cutting out the video and audio at the same time. I am doing a short video on how this happened, and how to avoid it. Thanks!!
Hi Ifootage Is great Kevin and so Is the Ifootage Tripod!
VianaAutoCenter. I love my pod. Thanks for the nice comment! 👍
One thing I wish it had was a locking screw for adding a small flat tripod head. Thanks for the review!!
I like so much your enthusiasm! Seems a great piece of equipement.
Cheers!
Thanks! Appreciate the kind comment Diego
Thanks for share, added to my wishlist!
You bet! Thanks for watching!!
You convinced me! total purchase.
I love when I get something like this, and it bashes my "maybe there's something better" to hell. I wish all my gear was like that!
Awesome! I just ordered the mini. Thanks!
Nice. You'll love it!
I agree completely! I keep the base in my bag at all times! Versatile enough for pretty much any situation where you need to get close to the ground. I work at a wedding hall on weekends and I see the monopod in use all the time. Best part is that it takes up no more space than my 100-400 lens!
👍
I couldn’t agree more with you, I have this monopod and it really is fantastic!
I really like mine. Thanks Kent!
WAO !,...the retractable 1/2 screw,....FREAKING INGENIOUS!!!!. This is truly awesome!!!!. Thanks so much for sharing this!
You bet Onpex!
Great presentation Kevin. Super monopod.
Thanks Ed. I am finding I want another one. Super useful.
This is really a great review. I added this to my wishlist.
Thanks Trish!
Great review love the fact that you love, love LOVE this thing. It does look so well engineered. Liked and subbed thankyou
Great video, nice to see you so excited about this product. I was looking for some good tripod but now I'm thinking about this one 😆! ☮️
It's a great monopod, but if it's one or the other, get a tripod. No monopod is going to replace a tripod fully, unless you just need something light and travel-friendly with a small footprint.
@@BasicFilmmaker glad i read this lol
@@ButterKing-28 😆
You dog you. You finally got me. I've been toying with the idea getting a monopod for a while but couldn't justify it. The iFootage unit seems like it would be perfect for travel applications while moto camping where space and weight are hard considerations. I just put one into my cart on Amazon because I kept thinking about it since yesterday. You are now a richer man.
LOL! It's a good buy. And yes, I will now be able to retire with your purchase. Much appreciate the support sir!
Nice piece of kit for me who likes to film in the woods on the fly. Thanks for sharing.
Wingman!! Hey there! Yeah, I would think this would work well for that.
That is just ridiculously good! I can see why you just love it.
Did I say I love it? LOL. Thanks!
I have one and love it too. Good vídeo my friend.
Nice. I am really looking forward to their upcoming nano slider coming out this summer that I saw at NAB.
Always love your videos mate.
Thanks Andrew!
i got one of these in tokyo last year. amazing monopod.
I love mine.
That's a great price. I was figuring it would be in the $200-ish range or more. Good job, iFootage! :)
I agree. I thought it was going to be way more.
Thank you for the excellent review! I am quite impressed with this monopod!
Thanks Tracey. Still have it and use it all the time for moving the camera around the studio. 👍
@@BasicFilmmaker I have ordered one and it's on its way!
Awesome! I think you'll really like it. It just all feels good and solid.
I love your enthusiasm, me too I love quality. Just checked the price and for the quality it is cheap; I'm going to buy one ASAP. It has so many uses no need to lug around heavy gear. As always thank you very much for your brilliant tutorials.
Thanks you Ajarn!!
When something is top quality it is a pleasure to use and makes you want to use it; unlike my crappy cheap gear that is a pain in the A ha ha.
😂😂😂
Dang all time?! Super cool review that thing looks fantastic.
So happy with it. Super useful in the studio when I need some quick shots and don't want to shift tripods around.
I have owned the carbon version since it was introduced! It is fantastic but I actually see in your model that they have made a small unadvertised improvement to it to address the only problem I have with it. They have put a small knurled edge to the red quick release locking rings. Mine is all smooth so having very dry hands I sometimes find it difficult to get a good grip on them as my hands slide off. A work around is to use wide rubber bands so no big deal! I also own their Mini jib, S1 slider plus their other Cobra strike monopod, all of which are of the highest quality. I have definitely become a fan boy! 😃🙏🏾
Nice Eugene. I took a look at their Nano slider coming out this summer. I am so very impressed with these guys and their quality.
I wish I had seen your video sooner. I know how you feel. I have a Sirui SUP204SR and it’s just like the one you reviewed. I love the thing so much I bought two!
I've been told the Sirui SUP204SR is almost identical and is awesome. Nice buy. I love mine - portability achievement unlocked.
Your the best Kevin. I've been on the fence all day watching reviews. Sold.
Wow, thanks! I'm not a salesperson, but I sure do like this thing.
The last part about the hidden 1/4 inch blew my mind!! And I'm already stoked about getting this monopod one day lol
Jeez, you're a good salesman. I'm pretty hyped.
LOL! I just love stuff that works and is well-engineered, and when I find something like that, I get really excited that someone used their brains for quality over get it to the market. :)
Very cool monopod. Love your content
Thanks George. Yeah, I do like this thing a lot.
p.p.s. Added the iFootage website to the description. www.ifootagegear.com/products/
Responding to own comment to get it out of the "comments not responded to" queue. Notified UA-cam, not fixed yet. :)
Cooles und praktisch durchdachtes Konzept für den täglichen Bedarf Top👍👍👍👍👍
Danke, Dieter!
*p.s. The Minipod only unit is here: **amzn.to/2GIqUIg*
Responding to own comment to get it out of the "comments not responded to" queue. Notified UA-cam, not fixed yet. :)
WOW NOW THAT LOOKS LIKE A GREAT MONOPOD, GOTTA GET ONE, THANKS FOR THE INFO ;
👍🙏
Just ordered mine today can’t wait til Monday 😅
Oh, you’re going to like it!!!
I love a good monopod. I'll have to check this one out!
Also, it looks like you've got some rendering glitches in the video. A really big one at 9:28.
Yep. Bad fixes too. I left them in as I wanted to show what happens and why in tomorrows video. :)
I have had a SIRUI MONOPOD P-324S for years. Does exactly the same. Pretty similar specs.
Nice. These designs work.
Looks similar to the Sirui monopod thing - except the Sirui doesn't have the quick release plates, but it does have a nice twist pan function that is butter smooth.
Yep Matt. Some have mentioned that one, and from what I see, it's another great monopod.
Adding to Xmas wishlist
For sure. Maybe birthday if sooner? :)
Nice presentation! :)
Thank you Edin!
I think you made me love it too... The screw solution was GREAT!
I love it. Awesome monopod, and my favorite feature is that little plunger screw. LOL!
@@BasicFilmmaker can only find the 120 in _aluminium_ over here, the 180 in carbon only. Investing at next visit to B&H...
Hmmm....over here meaning Amazon EU?
@@BasicFilmmaker Well, you can't find it on Amazon "eu" (which translates to amazon.de) - and only a couple Swedish retailers have it. Since you asked about Amazon I did a better search and found it for 190 US dollars :-) (AND I found the answer to your *not green screen* background in your text/description, so please ignore my question regarding that)
@@gone4good Great!
Manfrotto has had the 3/8 to 1/4 spring screw for years. It is a nice looking pod though.
Didn't know that. Stupid silly, but useful as hell.
ifootage is't new, and has had the 3/8 to 1/4 even before manfrotto. Search in youtoube.
Well, no matter who designed/developed it, I wish all my stuff had that feature. I went around the NAB show, showing this to other manufacturers saying, in essence, "How come you don't do this?" :)
Just ordered mine. They are on sale right now on Amazon for $149.00. Use the link in the description for this video, everyone!
It's starting to get expensive watching your videos. ;)
Thanks for all the great work!!!
LOL! You think it's expensive watching...you should see my CC bill for the Canon XF400, MixPre-3, Shure SM7B and DJI Action Cam I purchased just in the last 2 weeks. Happens to me too when I watch Curtis Judd videos. :)
Wait!! I forgot to mention the Alienware decked out laptop I just ordered @$4500. OK...I'll stop now. :)
I’m impressed as well. Looks well designed and made.
Still have it after all these years, and use it daily. 👍
This is very well made
Thanks Kevin!! Signed, Kevin. :)
I am looking at this monopod to add my Crane 2S on the end of it. I am concerned about the quick mount at the end of it. In holding your camera above your head did you ever feel like it would come off? Also, do you have any idea about the weight it can handle at the end? Thanks!
Awesome video,you've convinced me to get this monopod! The monopod looks very sturdy standing on its own. How well do you think it can stand on its own at outdoor? I have a Sony A6400 + sony 18-105mm lens, the total setup is less than 2lbs. I don't have a tripod and dont plan to buy one if this monopod can stand on its own. I am taking couple photography shots most of the time during travel.
It stands on its own very well, BUT, like any monopod, high wind, unbalanced non level ground, and you may have problems.
Hi! Couple questions. How do you level your shots. Do you first set it up and then extend it because the air bubble is up and the ball knob is down?
Also is it stable enough to shoot like an interview (completely still) and what about pan and tilt shots?
Great review. Thanks! :)
Most cameras have a leveling menu. If you’re shooting lower and your hot shoe is open you can use a bubble leveler in it like I do. It protects the shoe and gives me what I need to balance it.
I bought mine on Amazon and it arrived today. It's the C180. I also purchased the head which is coming later next week.
I don't have the head. Do let me know what you think about it. Have been eyeballing it for a while. Manfrotto plate compatible? Thanks!!!
Looks Gorgeous 😍
👍
This was a great review
Many thanks!
Great review! I’m buying one!
Cool. I wish I would have gotten the carbon version. I hadn't really had my hands on it so didn't know if it was just as stable, but from all reports in the comments, it is the same, handle a bit more weight, and is a bit lighter.
I'm convinced I'm getting one, thanks buddy!
I dont think you’ll be disappointed. I suggest the carbon fiber one.
@@BasicFilmmaker The one you have Is exactly what I'm looking for. I just recently bought one when i opened it I could tell right away it wasn't a good one this was my first time buying one too. It has too much give in it, Its trash really and I don't like it. I'll get the Carbon fiber like you said. Thanks again my friend.
You bet!
Great video, very helpful
Thanks Tyson!
Looks like a great option , thanks for posting this video ! Can I attach let's say, a monolight/flash unit to it ?
You could attach anything with a 3/8 or 1/4, or an adapter, including lights, cameras, microphones, etc.
You convinced me to buy one !!! and I love this monopod
That's cool! I like it a lot, really glad you find it as nice as I do too!
so do you still love it?
BMI Films Sure do. On a trip now and that’s what I brought with me.
@@BasicFilmmaker im gonna bite the bullet and spend the extra money!
fantastic! How does this compare to a Manfrotto Xpro monopod? I want to be able to make smooth push in moves etc and all that depends on the ball head at the bottom of the monopod...perhaps you are familiar with the Manfrotto Xpro too?
Haven't used the Xpro but assume (???) they are similar.
Ok. I’m sold. I was in the market for a monopod and with me being a new creator it can be overwhelming at times with all of the different brands on the market. I’m definitely going to save up my coins to get this. Thanks for sharing.
Cool. Thank you.
Great video 👍
Thanks Crazy Dude!
Kevin, you are a genius. I so enjoyed this video. I NOW have a way to check my gutters without using a drone. 😀
I have the A120, great value and plenty tall for me.
Nice!
@@BasicFilmmaker I'm also have a120, Nice monopod
Enjoyed your video. Commenting here so that UA-cam will love you as much as I do.
Thank you!
I just purchased the carbon fiber version of this without realizing there were two different types of material lol. I almost canceled my order to purchase the aluminum, but ended up googling the difference between the material and learned carbon fiber is stronger. So it makes sense why it’s $30 more.
Yep. I was against the carbon fiber for a tripod, not monopod. I got one, and it’s freakin awesome. Live and learn. 😁
I bought this last year for my huge Sigmas since I am unfortunately a tiny person. Couldn't bear the thought of lugging around a tripod and/or monopod. I researched for a solution that could fulfill both needs but was very disappointed with the high prices and mediocre reviews. Somehow I found this thing and it ticked off all my boxes. It is just an amazing piece of equipment. I could not keep my hands off of it, it's so well made. Absolute perfection. A very adequate review!
Thank you. I decided I'm going to make a follow on video this weekend, as I am getting soooo many questions about this. Stay tuned. :)
@@BasicFilmmaker I'll definitely be on the lookout for your follow up!
👍
@ Basic Filmmaker What about the leg length? I have a Sirui SUP204SR with 7" legs and it can support and not topple a fully rigged and balanced BMPCC4k even when push tested. Do you think this monopod could do the same?
I decided I'm going to make a follow on video this weekend, as I am getting soooo many questions about this. Stay tuned. :)
Fantastic review! You got me sold on this. But(!!!) size does matter and I find it difficult to figure out what's the minimum height is of this thing if you detach e-ve-ry-thing! It says around 70,5 cm - but is that with the foot and the top and bottom screw thingy? Would love to have this in a hand luggage and that 55 cm of height (and a bit more if you place it right :)). Sure I could go for a smaller model, but that would kind of ruin the idea. So my question is: What's the absolute minimum height if you detach as much as possible?
I'll disassemble and measure. If you don't hear back, just email thebasicfilmmaker@gmail.com and nudge me. :)
I have the carbon fiber version and I love it also! Best monopod I've owned.
Nice! Carbon fiber also stable like the Aluminum? I haven't yet got my hands on it.
@@BasicFilmmaker I haven't put a couple together but it holds my A9 & 24-70 GM just fine. No issues.
Nice and thanks. I thought so, and my next one will definitely be carbon fiber.
Having used all the other video monopods, I've gotta say that this is the only one that I would ever willingly use again. Of course, someone stole mine out of my car, so I'll have to buy another one eventually, but God I miss having it!
Someone stole it? Arrrgh! So not cool. I've heard some car insurance will cover stuff like that. I hereby give a gigantic BOOOO!!! to the person who stole your monopod! :)
I bought the shorter version specifically for use with my Ronin-S. Perfect combination! This is the best engineered piece of camera equipment I own, period. I also own the Sirui P-204SR P Series Monopod which was $169 and the Libec Hands-Free Monopod with Dual Base Video Head which was $259, both have major engineering and/or quality control issues. So not only is it the best, it is an amazing bargain price!
Agreed. I've had way too many monopods to not realize these guys nailed it. :)
The Sirui has quality control issues? I figured the Footage was a clone of the Sirui with smaller feet and lever locks instead of twist locks. Which is better (twist or lever) is opinion. The Footage is the same As the Sirui with removing the shaft and putting rubber or a spike on the end without the feet, I think.
I don't have, and have never used the Sirui, so have no valid opinion. I think a new buy would be for replacing one that is of lower quality, or for someone who doesn't have one.
I have it and its the best monopod I ever had. 10/10
👍
Hi. would like to request for a comparison between your Ifootage Cobra 2 and the Sirui mono tripod. I hear a good review of the Sirui especially of this more wider tripod sturdy legs. Thanks.
Very similar. The Sirui has feet that are just a bit longer, but I think the iFootage is built more solidly, but as always, you should make your own buying decision.
Good job !
Thanks Davy!
This looks great. How does it handle larger cameras and downward sag? With the Manfrotto MVMXPRO500US my C100 starts to slide down as I use it, the springs can't seem to lock firm enough for a whole day of shooting. These locks and springs look to be much more firm and durable.
I haven't seen any downward sag, although it IS a monopod - supped to hold up to 18 pounds. Check out the mechanisms on your Manfrotto. I had a tripod that did this, and was able to use an allen wrench to tighten them up and it worked great.
lol@the end. Now this looks like a very ruggedly built Monopod with great features.
Did I say I love this thing? LOL! :)
WORTH IT OR NOT? Used it for 2 weddings so far. Enjoying the features
I love the description of this video, where can i buy this? is it on Amazon or any other website? thanks!!
Links for B&H and Amazon are in the video description. Thanks!
I bought this and oh my god! It’s amazing. Do you know if they do a tripod with the same quick release function. Having the option to go from mono to tripod would be amazing
It's nice, right? Not sure if they do the QR thing for their tripods, and yes it would be cool. I THINK that quick release was designed for an easy and solid way to disconnect the top and turn it into a mini-pod. Could be wrong about that. A better option for this, and for all your gear overall is to use quick release plates - See the quick release plate video here: ua-cam.com/video/CIPpijjZ0D0/v-deo.html
amberfilm that would be pretty cool to have tripod like that too. Quick release can change your life!!
I have them on everything. :)
Now I want one
LOL! I actually want another one. Super handy.
Love your enthusiasm! Question: if you loosen the tension control knob at the bottom, is it possible to rotate the monopod (that is, do a pan movement)?
It does. I didn't cover this in the video, but the ideal is this monopod PLUS this video head, which is small and built wonderfully: amzn.to/2RhxZpD
@@BasicFilmmaker Thx K. Appreciate it. I"m sold. i plan to once in awhile put a Ronin SC gimbal directly on the monopod. No video head. Then do slow pans by rotating the monopod slowly (with the tension knob loosened) and having the gimbal very smoothly/slowly follow the pan movement. Sounds like this will work. (unorthodox setup i realize but wrks for a particular situation). Thx again
@@brianmimura5430 Cool! Whatever works. Keep trying to tell people no one watching cares about how you did it or what you used. Well, maybe us geeks do. :) I got some awesome slider shots for a commercial one time just sliding the camera rig along a granite countertop. :)
Best review ever love it
It looks very interesting. What is the difference between the C-120, C-150 II, and the C180?? Trying to decide which one to get, in carbon fiber of course.
I only have the 180. I "think" it's the size. You can look at the differences here: www.ifootagegear.com/collections/all
Very interesting! I sort of wrote monopods off because they're so iffy. But perhaps I'll give this one a try.
I love monopods for quick shooting, and despise them as they are always so hinky. I'll be buying a second one - has become super useful.
@@BasicFilmmaker That's awesome. I'll check into it.
Thanks!
Hi Kevin, I must say that I didn't even make it through the whole video and you had sold me on this monopod already but I had to actually pause your video at 10 minutes and 4 seconds because you really got my attention with that piece of info and then I was really interested and ready to see how much this monopod cost which it will be an investment for me and I am going to get it but I am mad that B&H has discontinued this particular monopod. Amazon still has it in stock so that means I have to jump on it ASAP. Thank You!❤
Huh. I went to B&H and it says special order, not discontinued. Anyway, yeah, it’s a good one.
@@BasicFilmmaker hey Kevin, when I used the link that you provided last night it did say discontinued but I just went to the actual website and it does say special order but that is not a big deal, it could have been a case where they updated their website since I last checked. I still thank you for all of the information and your review on this product.❤
You bet, and appreciate the kind comment.
You know having watched this I believe this would solve an issue I have with space. Unlike a tripod this thing would enable a person to back their camera up closer to a wall! A sure selling point for those with limited space much like myself! ;) It looks steady enough to place a rig on with camera, light and mic.
I've totally used it for that. Having the ^#%$ tripod legs all over the place and tripping over them in small places, I ditch the tripod pos and use this.
I fail to see how you can use this without real tripod head? I want to "dolly" in on a shot, I have to keep the camera centered on the subject. That is impossible to do without a head as the camera is locked perpendicular to the main axis of the monopod.
For sure. I use this with a head on it, as the optimal solution, but when at NAB, didn't have one, and was still able to pull off the shots I wanted.
The spring loaded screw is super cool. I have a very old Bogen monopod that has that same feature, not sure how many others have used it but it’s a great idea. What about the motion of the ball head at the feet, is it smooth for panning? I was initially attracted to the Manfrotto because it has a a fluid ball head at the bottom.
Super smooth for me. I like that it just works. Thanks!
@@BasicFilmmaker Great to hear, thanks so much Kevin!
You need to sell products for a living! Jut ordered mine! Thanks.
LOL! I hate selling things, but I do love this.
I’m happy with my Benro monopod, but I might have to get one of these anyway. Any thoughts on adding a fluid head to this unit? All my cameras have Arca Swiss plates on the bottom at all times
Arca Swiss plates are the bomb. I've had the Manfrotto ones for quite a while. This thing holds a LOT of weight, and I think any smaller fluid head would work. Not that it couldn't handle a larger one, but that would defeat the purpose of have a small travel unit. Do you know if the Arca and Manfrotto plates are compatible?
@@BasicFilmmaker I believe the Manfrotto plates are wider. I have a couple tripods that I have attached Arca Swiss clamps to Manfrotto plates so all my stuff is standard. It's not pretty, but it works.
The fluid head, ball mount feet combo can get you some great movements. I have a at least one fluid head that has 3/8 thread on the bottom instead of the big ball mount. I tend to crank those down pretty tight. Do you think that pop up thread sleeve thingy can handle a liberal dose of torque?
Yep. I have really torqued this thing down - I'm the same way, I gorilla these on, and it works fine. I really need to switch to Arca plates (which I've just ordered some test ones), as although I like the larger base on the manfrotto, I HATE that you have to slide them out, especially when using a cam that has a bottom mounted battery.
I have one. The problem I have with it is with a wimberly mono pod gimbal head . To much weight it spins off
Hey, I do cooking videos and I need an overhead camera setup! Will this do or are there better options?
This could work, but I think there are better options. A VERY high extended tripod that is a stable with a horizontal crossbar to hold the camera might be a lot better. I suggest you try something like this and mount your camera to that: amzn.to/2Lzbko1
www.amazon.com/gp/product/B01K9WEV76/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
How is this compared to
Sirui SUP204SR Aluminum-Alloy Photo/Video Monopod? Thanks.
From what others have told me in the comments, they are very similar.
How would I adapt my peak design capture plate to it?
Oy! No experience with the peak design plates. Remember you can put plates on top of plates. I use the SeaStars QR plates and attach them to the slide mechanism on a tripod QR plate.
I just bought one, and I could learn to love it. However, while the feet came off easily, I have not been able to get the top with the video head to come off. (I may simply not have the physical strength, which will be a major bummer.)
It’s pretty easy...just pull down on the red part, and lift up on the center thing. I don’t think it involves physical strength. They machine these to very close tolerances, and yours may be very tight at first. With the mono pod only, practice pulling down on the slide, and removing the top a number of times, possibly twisting it a bit, and it should loosen it up after a bit. If you still have a problem, let me know, as I can always email the folks and see if they have a solution, or if you have a faulty unit.
Great video, .....and no prizes for guessing what is in 'pole position', pun intended here .
LOL! Thanks!
Okay, you've sold me. I'm buying one. And speaking of using it as a propeller, I just saw a video today of where a guy's prop fell off his single-engine plane. He landed safely but I'm sure he wishes he had this monopod as back-up. Thanks for the great review.
I work next t a small airport, and I'm thinking I could make big money in sales of this. :)
And I just ordered mine from Amazon using your link. So yes, you could/should be their number one salesman!@@BasicFilmmaker
LOL! Never considered myself a salesperson (tried it earlier in my life and failed). :) Thanks for using the link - these small amounts add up and offset the cost of all the stuff I buy for this channel. :)
I know what you mean about buying stuff. I've collected a small studio's amount of stuff over the past three years and I don't even have a channel. I'm hoping to start one but it seems UA-camrs are in their 20s and have 50 tattoos. I'm 67 and don't have any tattoos. I'll have to ask my wife if I can get one. But by the way, you're a great UA-camr and am learning lots from your channel. I guess you have some tats somewhere or other!@@BasicFilmmaker
LOL Mark. Nope, and what the hell, 67 no big deal. I'm 61 (although my wife has not upgraded me mentally beyond 15). I find having a UA-cam channel really makes me know what I am talking about. For instance, I am doing a video on large mass storage drives for video creators, and it makes me do my research. I learn a lot. I suggest to anyone who has a new camera that the best way to learn it, is to do a video on it from top to bottom. So what if no one sees it, you'll end up like a ninja with that thing. And thanks for the appreciation - these comments mean a lot. Oh, and no, no tats. I see enough old people who were tatted earlier in life, and these get fugly - just wait until these kids grow older and their tats fold over themselves. :)
Hi what about how sturdy it is with a big lens on like a 24-70mm? Is this stand going to fall over easily? Do you need to put sand bags around this? I’d hate to have super expensive-camera n lens take a nose dive.
Please let me know? Ty
I am testing this with a heavy lens and camera. I mount a manfrotto 701HDV head, just slightly pivot the monopod back a bit, and I'm good to go.
Sigma 50-100mm is over 3 pounds and does fine. I wouldn't go very far if it's windy or you have kids or other clumsy folks around. But I completely trust it 100% if I have control of my surroundings.
Cool. Doing a follow on video next week to answer these questions. Thanks!
Did you look at the CF version? Thoughts?
I had my hands on it at NAB for a few minutes, but can't say I've used it. From all reports in the comments here, it the same, only lighter and carries more load.
i can see you are very hyped up on this one, how about the slypod from moza?
I haven't gotten my hands on the Slypod or used it, so I couldn't say, and that isn't released until July if I remember correctly, and the price is not to be had yet that I can find. Until then, this is the one for me. :)
@@BasicFilmmaker i can see why this one is practical and nice, thanks for the reply
You bet!
You showed something I haven't seen in other videos. This monopod should hold my Sony ax700 without touching it. I do long footage of shows and performances. Sometimes I need to move from one place to another so I prefer a monopod. Obviously I'm not going to leave the camcorder standing on the monopod all the time. What I need is a few seconds to relax my hands or drink some water during filming. Thank you very much. (I'm using a translator to write)
Thanks. Translator works great!
I don’t know how you come up with this extends to well over 6ft tall?
A180 Cobra two days it extends to 180cm this is barely over 5’11”. What’s up?
Well, 71" is 5.91666666667 feet tall, call it 6 feet. I'll measure this later with a tape and include those dim's in the description, as many would like to know full height with minipod attached, without, and compressed length with minipod and without for determining if this would fit in their carry on luggage.
Hey so random update, after 60 days of waiting on B&H I cancelled my order, i was very excited about getting one so i ordered from a canadaian company. after waiting another 30 days or so the item was lost, but i ended up contacting the post to get it, and found a badly damaged box. I had to come back and watch this video to make sure i wasnt crazy, but pulling back on both of the red quick release spots did absolutely nothing. I cant get this thing to seperate no matter how hard i try. Am i doing something wrong? its most likely going in the mail , but i need this for an event in 5 days, so if there is some advice so i can benefit from this, im all ears. Cheers
What the hell? Contact iFootage like right now and see if they can help you. Weird occurrences you are having.
@@BasicFilmmaker its a wild story, i have the item, but the original shipper has refuneded me, so im sending it back. i looked into it, it happens about 1 percent of the time, wild i know. I even came back to watch this one more time, its clearly a defective unit. thanks again, will just stick with a my tripod for now.
Cool and thanks for letting me know.
I use a monopod frequently. But, I have a compact fluid head. It's a great combo.
Absolutely. I am looking forward to see what iFootage recommends for a fluid head on this. I have the older 701HV from Manfrotto, and they stopped making it, which is too bad, as it's awesome.
@@BasicFilmmaker I make all the camera attachments Manfrotto, but other mounts to sliders, jib, etc Arca-Swiss. Wish Manfrotto was Arca compatible. All those proprietary fluid head mounts should be Arca. I have a Velbon that I shaved the top off and mounted an arca base. If you can"t slide and balance your camera they're worthless IMO.
Agreed. I've been considering moving to all Arca plates, but they aren't compatible with my Manfrottos, of which I have a ton of. Wonder if it's so close a tiny bit of customization would fit?
@@BasicFilmmaker Two issues 1) width 2) safety catch. The catch is the problem. I have two Manfrotto 502 heads; hate that kludge ratchet lock system.
Yep. Order some test Arca plates yesterday. I love the bigger base on the manfrotto, but HATE having to slide them out. A recent cam purchase and the battery door is mounted on the bottom, which means I need to slide the cam out on the manfrotto to change the battery. Arrrgh! Yep, Arca vs manfrotto QR plates video coming soon. :)