making a home made motorcycle gas tank

[@Henrik.Yngvesson]

Now that's a "tank" with that thick plate, only missing tracks and a gun tower ;)
Would take a lot to dent it.

[@codycheney3401]

Hey I think that you did a great job with not just the tank but the whole build ! Keep up the good work ! A friendly suggestion when putting filler on the tank cover the entire tabk to come out with a nicer finish !

[@ExperimentalFun]

The bike looks awesome, nice job, you might want to get some tank sealer so that the inside doesn't get all rusty

[@nicholaspap7197]

Experimental Fun it could be galvanized wich means zinc plated wich prevents rust

[@J4nssent]

that was not galvized, also that would be very dangerous to weld

[@nicholaspap7197]

Tuur Janssen every piece of metal he used on the gs100 build is pretty much galvanized atleast thats wht he said

[@nicholaspap7197]

Tuur Janssen but ur right the gas tank is not its just sheet metal but aslong as there is gas in it it wont rust unless there is water in it or its sits long without gasoline

[@katieb2153]

He probably used tank sealer, Im about to watch part 2 to see.

[@TimZ007]

Awsome. But considering the time involved may be easier to make a cool cover to go over predator tank. Kind of like plastics on street bike tank. Might give it a simular look with less hassle. Very well done though. Might be time to upgrade to tig. Less heat and warpage plus no slag. I use the flux core myself most of the time. I like to weld with the fan on me. Gas dont like that.

[@Fullthrottle440Garage]

Awesone . Great job man. Just wanna say even though I don't always comment, I watch all your videos.

[@zeeshankhanshani4729]

Oxm

[@zeeshankhanshani4729]

Nice

[@SgtBrewdawg]

I know I’m late to the party, but this is one cool build. Great job and thanks for sharing and the insight. 👍

[@jasong5430]

+rather B welding what gauge sheet metal did you use? Great looking tank btw!

[@garymucher9590]

Impressive gas tank build. You are going along nicely. Bravo.

[@mikebarrett3428]

The tank looks like an old BSA tank. Very cool!

[@thomasjones6629]

I really enjoyed watching this project. I will have to give a try sometime with my everlast mig welder. I've always wanted a customized gas tank.

[@jeep2003]

Looks great. I always have trouble with homemade tanks rusting up and clogging fuel lines. Seems you do too judging by your last tank. But im too cheap to buy sealer so i guess it is what it is lol

[@BUILDNIGHT]

hey man...tank looks great. one suggestion.... SMILE once in a while! show us you enjoy what you're doing. keep it up.

[@arielhamm309]

Que buen trabajo quedo exelente el tanque saludos desde Corrientes.

[@nicgyver8359]

I am impressed by how you made this gas tank. The log metal shaping tool is on point.

[@FireAndGasoline]

Nice looking tank! Metal may be a bit thick but whatever works.

[@mikebarrett3428]

You should invest in an English wheel and air hammer.

[@peterklein6287]

Very nice tank! Please paint the frame red. Polish the tank and clear coat it. It looks like a Hodaka trail bike.

[@zgriff]

Your fabrication skill progression has impressed me a lot. Keep up the good work man!

[@edlakin4785]

The channel art is beautiful! Great work!

[@prancstaman]

BAD ASS DUDE!! Matches the bike perfect.

[@SantaTheInsane]

I stupidly told a group I was gonna make a gas tank from scratch and now I can't back out. so this video made it easier to think of a good way to do it. a lot easier than what I was originally planning.

[@WillBilly.]

Spends 5 hours+ on a gas tank, uses a crap cap

[@alancosta4831]

true, bro

[@cityslicker5981]

Im liking the new angles of the project,and great job on the gas tank looks good

[@bikefarmtaiwan1800]

Very good work indeed- not an easy task at all - good for you

[@georgebone23]

Good stuff!

[@tinkeringclaws5559]

could also hydro form one from sheet metal using a pressure washer

Awesome work! Not going to lie, I was having huge anxiety at the 2.09 as you were cutting towards your arm!?!?!? lol

[@turkkhannewmovies]

very good nice

[@charliedalsass1502]

Great build defiantly one of my favorites!!

[@spikemandan]

@15:28 why not just buy a damn hole saw seems like a better idea! its called work smarter not harder just saying nice job on the tank btw

[@drakem3131]

Awesome job, and I may not comment, but I watch almost all your videos. Keep up the great work.

[@andywarren17]

Awesome work man. I really dig your videos. Since you're always building your own fabrication tools, this video got me thinking, you should build your own English wheel would save you a lot of work in the future for builds like this one.

[@PaulioMaldinio]

Dude, You Should Be Employed For Big Bucks, Straight OCC choppers Going on in Your Shed

[@468delray]

good job on fabing up the tank,but your going to need to use a good two part epoxy sealer inside that tank.

[@Cal1108]

Do you find Mig welding cheaper the Ark welding ?
P.S what your doing is Kick Ass

[@JamesJones-zg4bv]

Great job on the fabrication work. I think you are getting better.
May want to invest in a set of by-metal hole saws, works great drilling in sheet metal. low RPM with drop of oil.👍

[@justinhetricck6197]

you need to buy some gas tank sealer to put in that new gas tank so it doesnt trash your fuel like the other tank did. keep up the geat videos!

[@jpwipeout99]

I like the way u edited it this time and the tank look awesome on that bike!

[@timbyford21083]

Nice job. When are you going to get away from these Briggs style engines and maybe jump into the Chinese 125cc and up engines? That 500 was a good project. But maybe break down a simple live axle go-kart and throw a SSR 125cc on it and make a sweet shifter kart. Cheap parts all around.

[@sandylancaster5901]

great looking tank

[@Halliday7895]

get rid of the plastic cap...itll look way more trick....under that huge honkin' plastic one is a metal maybe..smaller the better since its a mini bike

[@ericksaldana4453]

Gas tank looks pretty thick

[@Luftschlag_]

Show a video of you ridding it

[@LawnGone]

Great video,wicked metal work! Hope you study engineering,you seem to be a natural! Keep it up !

[@junkman6261]

Nice work on the gas tank

[@ANDYMCNET]

My first time on this UA-cam channel and I was very impressed with what I've seen so I'm going to Subscribe now. ❤️ Hello

[@lesliesterer8273]

This is something I want to get into. I've got an everlast welder and plasma cutter. I just need to find myself a treen trunk

[@lecobra418]

Great job, your bike is starting to look a bit like a rat bike version of a Kawasaki 636 Ninja ! I can't wait to buy my house to have the possibility to build up my workshop (an my mini's) as well, you're truly an inspiration bro' ! Keep up the good job.

[@pandharinathdarekar9953]

I am from india.. ...Great job

[@b5856814]

For thin stuff like that step drills are the trick, the harbor freight ones aren't the best but will do the job for awhile. None of that break through bite bs. Your wrists will thank you. I've damn near broke a finger like that lol

muito bom. imagino o trabalho que deu fazer esse deposito. está muito mesmo

[@lakhyajitsonowal6883]

Nice.. bike frame is of iron or steel, pipe?

[@charlesallen5425]

Good stuff man.

[@joetri1970]

Nice tank.

[@spencerwells4523]

did anyone notice the audio is way off some times

[@joey_OG]

Spencer wells yea

[@Makercise]

Not sure what software he uses, but premiere pro makes anything more than 10x a pain to speed up both video and audio. A good stop gap is audio at 10x and video at 20x...or something like that. Unfortunately that means audio video out of sync. Could just be artistic license too.

[@sokjalapa4920]

Matt Modz

[@fabiomotos6]

Muito bom seu trabalho parabéns.

[@dave1135]

Is your welder a true mig, or a flux core? If so pretty impressive. Imagine what you could do with a tig welder.

[@hnoobsho]

Should build it out of stainless steel or aluminum to avoid rust forming on the inside and contaminating the fuel, or insert some sort of bag inside it that prevents the old from contacting the walls

[@bigsmoke1811]

Looks awesome

[@joreosuna650]

my tank was sealed with the resin used for fiberglassing, no idea on the brand you can get it here by the litre, but it's cheap and works well, mine was coated 2 years ago and I have't had an issue

[@luissouza5501]

Show !!!!!!!

[@nasnit1406]

Love the projects

[@fgtldyjxgzyjxriceicr9880]

Love it👌

[@lincolnpearson3556]

You are like me but ten times better.like your work keep it up

[@lincolnpearson3556]

don"t know why the link came up

[@shayamvanjare5843]

I want to make petrol tank for my bike can i make it with using atc welding

[@Alex-mb5ww]

The best....👍👍👍

[@purexroyalty20179]

Nice vid but what do u keep the inside from rusting

[@hillbillypeakgarage6797]

sealer

[@715101]

Keep it Filled up with petrol chuck a magnet next to the outlet 👌 those sealers are junk. Ethanol eats it and it start to flake off worse than rust

[@user-eg7tt3ps3c]

Chris you fellow ,Golden hands!

[@AndreLuiz-gk1mf]

Armored tank dude! weighed about 60 kg. hahah

[@bigcreekoutlawz3893]

You are an absolute artist

[@shroomskunk]

Next time slightly chamfer the edges so weld goes below level. When you clean the welds you won't be taking all the weld off

[@JeroenOsse]

I don't know much about welding but why do the places next to your welds get white after you welded that part?

[@shroomskunk]

Jeroen Osse could be a layer of galv burning off (zinc?

[@late9462]

why u using so thick metal? alltought great video and great product

[@msw3456]

late man do you know how hard it is to weld thin metal ??!

[@late9462]

i know what it is to weld thin metal and atleast for me it isnt a problem so i guess he can do it too. u just have to set your welder right to make it easier.

[@msw3456]

late I belive he can do it, too. But I think it's not a problem to use a tiny Bit thicker metal because it's way easier. It is a little bit havyer but that's not a problem I think.

[@dave1135]

late looks like he's using a inexpensive flux core welder, you dont have the precise voltage and amperage like you do with a High buck Miller, too much chance of burn thru with thinner metal. A tig welder would have been perfect for this

[@late9462]

well thickest i would use for cas tank is like 1mm thick and he uses like 3mm thick metal :D allso he could made those side pieces from just one piece if he used thinner metal cus its way easier to shape

[@ablueeyedmale]

You need a plasma cutter.

[@gernblanston4956]

Looks to be 10-12 gauge?

[@mxrider2strokebraaap54]

What a masterpiece!

[@karlistomsons3942]

15:28 whats the song called?

[@davidjay7564]

You've got a perficly bad stick welder and u use the mig

[@sandylancaster5901]

hand crafted fuel tank that made seal it please

[@martinshow5146]

i think it istime for you to start building real cars, Hot Rods and more...

[@iliyaisaev8762]

Он чё, бронированный?!!

[@redorrick427]

geometry was his favorite class in high school.Ha Ha!

[@nicholaspap7197]

Invest into some circle saws

[@alexanderbierstedt5227]

611 view

[@jayireland2526]

You need a breather hole on top of it

[@ianduijsens]

thats built in to the caps in generator engines (atleast 80% of the time)

[@jayireland2526]

Ian Duijsens yeah but not on this one. The tank that the cap came off had a separate breather hole next to it

[@ianduijsens]

o okay didnt see that

[@hazemahmed7707]

What is your job

[@redorrick427]

you should get into doing some hydo forming.

[@caszor1778]

RatherBwelding please if you read this make your own homemade car

[@jdblaster5154]

Yeehaw

[@danielwood8171]

Your audio never sped up with video its playing real time while the picture is sped up

[@5_twenty]

you can do how to's!

[@gchristensen80]

Another tank thats going to put rust in your fuel system AWESOME

[@CRAZYRUSTYVW]

Cringe moment with the angle grinder I was waiting for it to jump and go into you arm/hand. Buy a clamp dude great video tho.

[@voltron63]

that works

[@zurikwashington9642]

First

[@yaboiavery5986]

Yay #notificationsquad

[@deadduck6578]

Dude. Watching you work is like watching a monkey hump a football. That should of been done with four pieces, lot less work, less welding, less grinding, way easier to blend. Your leak test, is bad idea. Got water in the tank. Now going to rust out the weld areas. Smart way is to add max 1 lbs of air and spray outside with soap and water. Btw, pressure testing with air is highly dangerous. A small weak spot even in the untouched steel can blow out.

[@ajlewis5446]

Y E E T

[@phill903]

Nice tank.