Розмір відео: 1280 X 720853 X 480640 X 360
Показувати елементи керування програвачем
Автоматичне відтворення
Автоповтор
Great video, can’t find them on the site though, searched forever. Should include a direct link.
Here's a direct link to the product! www.bagriders.com/fittings/push-to-connect-fittings/bulkheads.html
I can't find the SMC bulkhead drill bits anywhere in the UK, do you guys ship here?
Yes we do! We ship worldwide!
Could you remove the line from the bulk head fitting once it’s installed?
Yes you can!
do you guys use teflon and loctite to seal the threads or just loctite?
To ensure effective thread sealing, we recommend opting for either Loctite 565 or thread tape-using both is unnecessary. While Loctite 565 may require some time for proper curing and can be a bit messy, thread tape provides a reliable alternative.
no compression versions? i'll never use push/pull lock fittings ever again plastic or brass... asking for trouble
We use them all the time, no issues!
@@bagridersSo can push to connect fittings be used on hardlines?
So which one do I need to convert the quick connects on my Airlift 3P to accept hardline?
Email sales@bagriders.com and they can help you out with the fittings to run hard lines in your specific setup!
Which loctite do you use??
The loctite we recommend for sealing threads is Loctite 565 which can be found right on our website.
can i know what type of material you guys used for hardline setups?
For which part? Lots of different materials are used!
What drill bits do you use to make holes for this
We use these www.bagriders.com/fittings/push-to-connect-fittings/bulkheads/smc-dot-bulkhead-drill-bit.html
Thanks ! 🤙🏻
just start the hole with an 1/8" drill bit and use a step bit to fit... easy
Getting AN levvel lines on my setup 😉 can’t relate to this plastic talk🫣
Great video, can’t find them on the site though, searched forever. Should include a direct link.
Here's a direct link to the product! www.bagriders.com/fittings/push-to-connect-fittings/bulkheads.html
I can't find the SMC bulkhead drill bits anywhere in the UK, do you guys ship here?
Yes we do! We ship worldwide!
Could you remove the line from the bulk head fitting once it’s installed?
Yes you can!
do you guys use teflon and loctite to seal the threads or just loctite?
To ensure effective thread sealing, we recommend opting for either Loctite 565 or thread tape-using both is unnecessary. While Loctite 565 may require some time for proper curing and can be a bit messy, thread tape provides a reliable alternative.
no compression versions? i'll never use push/pull lock fittings ever again plastic or brass... asking for trouble
We use them all the time, no issues!
@@bagridersSo can push to connect fittings be used on hardlines?
So which one do I need to convert the quick connects on my Airlift 3P to accept hardline?
Email sales@bagriders.com and they can help you out with the fittings to run hard lines in your specific setup!
Which loctite do you use??
The loctite we recommend for sealing threads is Loctite 565 which can be found right on our website.
can i know what type of material you guys used for hardline setups?
For which part? Lots of different materials are used!
What drill bits do you use to make holes for this
We use these www.bagriders.com/fittings/push-to-connect-fittings/bulkheads/smc-dot-bulkhead-drill-bit.html
Thanks ! 🤙🏻
just start the hole with an 1/8" drill bit and use a step bit to fit... easy
Getting AN levvel lines on my setup 😉 can’t relate to this plastic talk🫣