How to flatten large LED RGB mousepad (LAST RESORT. NOT FOR IMPATIENT PEOPLE)
Вставка
- Опубліковано 15 січ 2023
- Welcome to another video! So for today's video, I'll be showing you guys how I flatten my Tecware Haste LED mouse pad.
This method is only for those that have tried everything but still haven't been able to flatten their mousepads. Treat it like a last resort because there's no going back.
If you're impatient and don't like a challenge, buy a new mousepad because this video is not for you.
this trick works but be very careful, i nearly broke my mouse pad took my 1h+ to fix it. Before trying this trick try the other safer methods
me too.
I recently bought a Belle Dephine Edition RGB mousepad from Ghostkeyboards and it had the wrinkle problem. Your method has worked perfectly for me! Thank you very much from Mexico
Been searching for a method that works, thanks mate, appreciate it ❤ Worked perfectly
THANKS!!! i was using mine since nearly 4 months, and it was never as flat as it is right now after doing those steps :D it had those curves since i got it.
The only solution I have found to work. Thanks a bunch, man. This has driven me crazy for years across like 10 mouse pads and I can finally fix it 😁
Worked really, thank you, from wavy to flat in about 15-20mins for me. I cut about 2-3mm on each side
thank you bro ! mine is much better now. really have to be patient. respect from germany
Worked like a charm. Thanks dude!
more people need to see this my mousepad has been super lifted and wavy for months and this completely solved my issue thank you so much for this video
i have a gms wt5 mouse pad and my mouse not working on this mousepad any tip? its work in other mousepads
thanks bro, now i also know why one light stopped working (caused by wobble in the rgb)
Thanx man.. Took me at least 10mins but worked on my deformed 2yrold pad. Took out about an inch of tube but worthit
Glad i was able to help!
FINALLY. Thank you so much you're underrated (I've been dealing with this for 2 years)
Glad i could help!
Bro great video! Earned a subscriber 👊
I had the same issue with my corsair mousepad, I just trimmed about a 16th of an inch of the end and pulled it a bit until it was flat. The sticker peeled off easily and was able to open it up with my leatherman and trim it up witht he scissors on it. I spent like 5 minutes on it and done.
worked really well. ty man
Thank you very much. I was a little disappointed at first, but after a little more effort, it worked perfectly. It took about 20 to 30 minutes. Thank you again. It really worked.
Tysm man I was thinking of just buying a new mousepad but this took me like 30 minutes and it was really easy to do!
Thank you for this! this has worked 100%!
mine doesnt have a sticker on the bottom of the case and there are no screws its just on there
Thanks bro 😎 I got it to look almost perfect
thank u so much man it took me about 30 min but the result is awesome
Thanks! This really helped. Took me about 20 minutes.
works perfectly, thanks!
I tried large objects and I went to try this but mine is clipped and not screwed so I can't unclip it
it worked but after a few months the light starts fading, i think the plastic somehow moved lol
This worked for me, took around 10mins, Cant thank you enough!
I usually don’t come back to videos and comment but ty my guy! I have the GameStop RGB XL mouse pad and I was confused on where the screws were until I watched. I had to completely tear the sticker off and couldn’t reuse it. That’s alright though. Anyways, I just kept pushing the wire like you said and at first it wasn’t working but I figured out how to push it though the thread and it’s flat now. The corners were kind of a B though, ngl. Thanks bro bro!
Won't work with mine there aren't any screws I tried to open it up but I only damaged the plastic I am just going to buy a new one... I don't know how it even wrinkled.....
Thanks for fixing my pad 😅 took me 15 min.
Thx! Its really works!
Hello this really helped me after I took out my 3 year old mousepad which I shelved cuz it was just too curled. After doing this its sits flush on the desk now. Thank you!
Is that an huper x auqa keyboard?
took about an inch of tube to fix mine lmao. was about to give up and buy a new one. thanks for this
subbed
glad you were able to fix yours!
This is such a hassle. Bought one from Steelseries yesterday, it was pretty much perfect, except few places and I made it 100 times worse trying to fix it. So yea, had to follow your guide. The tube wasn't even connected on one of the sides! In the end, I cut around 5 cm of it! Way better than it was when I first got it, but still not ideal. But whatever, it's good enough. I probably wouldn't have gotten it, if I knew what pain it is to own one lol. But it looks nice and syncs with my other devices. Thank you!
Thanks! I used a pair of pliers and pulled the plastic, so the straightening part took only 20-30 seconds. Total time dismantling + mounting back together: 3 minutes.
Wow this worked i will remember this in future u got a like and a sub sir
Finally my problem solve , thankss
Glad i was able to help!!
Ja z mojej podkładki wyciągnołem 11 cm dzięki tobie wreszcie mam ładną i prostą podkładkę
Literally just tried it ...worked so great lol my OCD was killing me ..I almost got rid of my new mouspad because of it
Same, BUT I CANT FIX IT
@@user-eb2zt6zz5q takes some patience but it worked
Omg i love you dude
U saved me thank you so much
took me 45++ minutes and took out 2.5 inches of tube !! thanks man !!!
It works! Thanks!
worked really well
Thank you it worked =) There was almost 2" of extra plastic in there!! Took some patience, but its flat now =]
I just took off the led strip, since I don't use it anyways and now its flat so I am happy :)
Thanks!!!
Critical mission failure. Was going slow and felt like I was making progress just to end up moving the plastic so far back it pulled out of its threads and went around the corner by about 3 inches. Guess mine was very kinked.
sorry bro
wow thanks so much
tx you saved my mause pad
Thank you so much omg
I LOVE YOU SO MUCH
This just keeps happening with these crappy led / stitched optical cable pads. Finally I just pulled the optical cable out of the stitching and removed the control unit. Now I have a beautiful flat mousepad, minus the cheapo inconsistent lighting. Nothing of value was lost!
Work 100% but be careful; you can break the RGB if you don't understand how to plug it.
I can't find screws on my pad
nvm found it, was covered by a sticker. was able to fix mine quick thanks
He's 100% on the money, the glow tube is too long it must be cut, that's the problem with all the warped rgb pads.
does it actually work
Yes some companies don’t really care and don’t measure the tube so u gotta manually cut some off and fix it
we have the same pad! paano pag mahina na ung lights?? pano gagawin
As far as i know, may 2 reasons why mahina yung lights:
1) hindi naka dikit sa light yung tube properly
2) old mousepads, yung sa loob ng tube ay hindi na clear so hindi na kaya ng light mag flow properly through the tube.
Sakin, yung 2nd reason kasi 5 years na mousepad ko haha.
@@EdVentures94 ginawa ko tutorial tinanggal screws, and mahina n nga tlga? ung ilaw nya andun lng sa 1-2inch from the light source..the rest wala ng ilaw so maayos p kaya un?
I can't find the screws
Even though I took of the sticker
welp, i tried your method but it ended up bending it even more :( will try to iron it and then check if it ends up fixing it, otherwise i guess ill return the mousepad and get a new one
Mine is worse 😢 idk what to do :(
Yep, mine too. Time to get a non-rgb mouse pad.
@@MrHalfbakedSnail ay watch this I cut the threading for the mousepad it’s fine now all u gotta do is take out the control box and use knife and carefully cut the threading that’s holding the led strip around mousepad
@@Zemixlol how i don't understand where did you cut the thread?
@@assowdg6980 the part that is holding the white thing for the led that goes across the mousepad or around it
@@Zemixlol so u just took the whole led out?
dude you are a livesaver.
Dont but a fucking havit led thing i fackt dont buy anything havit it doesnt work tut is fine produkt is ads
made it worse. gave up and ripped the stiches out to take out the plastic piece
Same... I don't know how to do it!! 😔😔
This trick works but i some mousepads cant be u scrub
...the led tube is too short..
If you don't care about the lights then you can just cut them with scissors and then it will be flat
why buy a rgb mouse pad if u dont want the rgb
hahaha
please for the love of god, dont listen to this amateur or you are going to ruin you mat. Believe me!