How to make Mosquito Insect Killer at home
Вставка
- Опубліковано 6 вер 2024
- If mosquitoes disturb your sleep at night, look at this video and learn how to make a Mosquito Insect Killer Machine at home.
No need to hold a mosquito swatter racket and run behind a mosquito, simply convert mosquito swatter racket to an electronic mosquito insect killer (an amazing DIY homemade gadget) that can be used to trap mosquitoes.
For material links and additional Info visit:
www.instructab...
✎Subscribe: www.youtube.co...
✎More videos: www.youtube.co...
If you like my videos, support me by visiting my amazon store. You will get all the materials at one place and i will get a small commission for all the purchases done, which will be very helpful in creating new and interesting DIY videos.
Amazon Store - amzn.to/2KEfarv
My Second Channel:
/ @guruhacks9688
Follow us:
Facebook: / goodtech1
Instagram: / goodtech_official
Twitter: / goodtech_1
Instructables: www.instructabl...
Google+: plus.google.co...
#DIY_Gadget #Goodtech #HomemadeMachine #Cardboard_DIY #AmesomeIdeas
I've had this idea and tried it years ago. I'll save you the trouble - it doesn't work because the racket's circuitry isn't designed for prolonged run time. The transistor eventually gets overheated and burns within 10-20 minutes. If you don't believe me, take one of these rackets and use something to hold the button pressed for that long and you'll see the circuit will die.
It would be interesting to see someone with good understanding of electronics show us how to modify the circuit so that it can run constantly without limit.
You are right. I have experienced the same issue, they weren’t designed for prolonged run time.
Also mosquitoes aren't attracted by uv light
You could fix that by implementing a timer circuit so it turns off after let's say five minutes and after let'say one minute it turns on again. I think that could be the solution.
@@alexisxyz7531 yeah, this is a good idea. I will try it.
@@eduardoasta Hope it work for you.
You can use an external timer to cooect and disconect all the circuit or you could make a timer from a LM555 basic circuit plus a MOSFET to do the thing.
MOST IMPORTANT QUESTION- why did you use a TP4056 charging module. In the mosquito squater the battery and charger module is available in same circuit. Cannot we use that itself ?
I know it's late, but I tried to take apart almost the same generic swatter and found out the battery is some type of lead-acid batt, but smaller. I assume its charger is different from those for Li-Ion type batteries will not charge it to its full potential. I don't know. Just a theory. :)
After I modify the circuit, how long it last in operation.
Making a mosquito killer from a mosquito killer. Genius!
please show working condition . release mosquitos in front of it
Wow, so straight forward to build! Said no one ever.
THEY LOST ME AT THE LARGER CAPACITOR.
Which material have you used for cover
GOOD IDEA ,, WHAT RATE ? YOUR DETAILS GIVEN PLEASE.
So simple even a young child could easily build one
You didn’t include the one thing everyone wanted to see
These kinds of zapper are dirt cheap, but are not made for long term use. A better idea is to get a transformer and use the mesh that these come with or you can up the power of these with a larger cap and you need a heat sink for the transistor.
You can also put a timer on it so that you don't burn it out.
Bug zappers work, they are really pretty simple, but this transistor is not designed for long term use. Too bad because these are cheap.
Disclaimer : No mosquitoes were harmed in the making of this video. :D
Hahaha lol
Well they should have been
FAIL lol
They should be
XD
My idea here. Make the box larger and change the lamp with a little dog. Dog is a quite mosquito magnet. Make sure to add more mesh so the dog won't zap itself.
Bhai ye direct b chala sakte hai kya? Bina battery k? Qki charge krke regular to ye bht time ya saari raat nhi chal paega
My wire net is no longer fill with electricity but the battery is still good and charging. You know how to fix that?
Change the capacitor
This zapper has only one side to attract mosquito, you can improve and get better effect.
I don't need charging how to direct the connection
Why not just buy a ready made mosquito killer instead of making one which basically costs you the same money plus the time assembling it.
Which one would you recommend?
By the time I look for the parts n finish building this..maybe a thousand mosquitoes would hv bitten me..
ok can someone tell me where did this guy get all that Blue plastic From
Its not blue plastic, its white cardboard(also known as sunboard) painted blue.
This will kill more moths than mosquitoes without a Co2 source. Cool build though.
I appreciate u
Can i use 3 v adaptor power supply?
You should have put brown sugar in that box which would attract the mosquito and more mosquito would have came and died..
1. Buy Moschito killer at DIY store
2. Own every tool possible
3. Be electro engineering expert
4. Rebuilt the already working Moschito killer
5. Tah-Dah! :)
Ohh C'mon, its not even that bad. When i purchased the swatter racket, i had to hold the switch and run behind the mosquitoes. But with this slight modification, i can just keep it by my side and sleep peacefully. It easily takes care of them.
I have a broken mosquito bat which is usless but this video is very helpful and now i can make my own mosquito killer.
Transformed a tool that could actually kill mosquitoes to something that will never.
NEVER WHAT
How u r sure about that?
how will u recharge it then???
I have attached a TP4056 charging module to the battery for charging it with a 5v wall adapter.
Great project, bro! :D
Thanks
MC's Creations is it works or not
Cool bugs realy do bug the hell out of me
Awesome
Aree bhai os bat ka hi toh sra circuit h whi isme alag kiya kya?
good idea!!
Thanks
Sir, If continues ON position, capacitor get brocken/crack...due to over charge?
workmen ship is very good but where is the mosquitoes.
wer did u buy heat shrinking tubes in which type of shop did u buy heat shrinking tubes plsss tell me the answer plssssss
These are easily available online on ebay and amazon.
Available in sp riad bangalore
And when the battery dies? You welded a wire to it.
A Li-ion battery does not die very soon. However, i have also connected a TP4056 charging module, so the battery can be recharged easily. Also, if the battery becomes completely useless, then the device can also be operated using a 5v mobile charger.
Well, why you don't buy a ready one ?? It's cheaper 🤣
You are better then other
+Md Arif Thanks..
Best video... Than others
This DIY could use a voice walkthrough and not the most annoying music ever invented.
Sir, Is it continues ON position? If yes how long battery life? Can we us full night in ON?
Yes, I am using it since i made the video and it has worked wonderfully well. The li-ion battery does easily provide a good backup, however, you can also leave it connected to a 5v adapter without worrying about backup. I am not sure about the cracking of capacitor (depends on its quality) but it has not happened to me yet since last 2 months.
You didn't say how long it lasts with a full charge
@@mja2239 almost 48 hours or more
Yar yai circuit jo isme joda hai yai kaha se launga mai
is it white LED or Blue LED?
5mm ultraviolet LED.
We can't see UV light and it is bad for us. It's blue led
Hi, what is the name of that blue flat cover
"presentation board" is probably what it is, you can find it in office supplies. For a sturdier construction, I would suggest something like "MDF" medium density fiberboard. It's heavier than presentation board, though.
🌺🌺🌺A good FREE source of presentation board is signs that people put up, ILLEGALLY, that advertise they buy mobile homes, or whatever. Depending on the city, most municipalities have rules about where and how to post signs. But people still do it anyway, because they know people will see the phone number and call. BUT, at least in the city I live in, pulling up those signs and taking them home is not theft, because they are considered abandoned trash, even the metal frame or wooden stakes! SO. There is your FREE source of that thick plastic stuff!
My dad has a whole bunch of those signs. That material comes in handy. I use one of them for outdoor arts and crafts, so I don't get paint all over the table
xxx okay delete what I just said. I watched the video again, and that's not presentation board (although, pulling up those signs is still a great idea! check your local municipality's rules)
What he is using more closely resembles the stuff they use to make inner tubes with bottoms, for when you want to go tubing on the river. But that stuff is thicker. So idk. Show this video to the person at Home Depot, I'm sure they can help you out
✨✨✨ While you're at Home Depot, another useful material is wall board, used in showers. The shiny side makes a good dry erase surface. The workers at Home Depot can cut it small enough to fit in your car and take home. Before you leave the store, grab yourself a "Sawzall" and a circular saw and you're gtg!
can you tell me the name of the device which you are using as a glue plz rply
It is a hot glue gun available online on ebay and amazon. Also available on local hardware and hobby shops.
glue gun
lol
Make a killer glue gun!
Buy glue gun from store
Disassemble it, cut then power and ground wires, then discard gun.
Insert glue stick up nose and plug cord into wall. Grab each wire. You'll start to get hot, really really hot and glue will melt. Lean over parts to be joined as glue drips from nose.
I tried it .the battery drains easily if it is on a long time..better with the direct charger with no battery anyway its overnight running.
Yes, battery does drain but using a good 3.7v Li-ion cell 2200 mAh, makes it last for full night. However, using it without a battery is also a good idea.
Look for a relevent reply elsewhere in reply to some one else... It answers your question perfectly...
Does Any one able to kill the mosquitos?
how much will you charge me for one of your trap ? will buy 2 let me know thanks
Hi Daryl,
I haven't yet started selling my products. All i do is teach everyone how to make these easily. It is quite simple to make and you can also make one on your own. If you need refer to my detailed tutorial here - www.instructables.com/id/Mosquito-Killer-Machine/
This won't work I've tried in previous years. This doesn't attract mosquitos.
gjb video🤗🤗🤗
bhai ek mera bhi aisa bana do pleez bahut jada machcharrrrr h☺☺☺
nice video l like it
Thanks
अच्छी आईडिया है।बाकी इन्सेक्ट आएंगे।मच्छर तो लाइट से दूर होते है। बिना लाइट मच्छर आएंगे।
Why didn't shoot use effect?
What..??
Sir can i attach 5v adapter direct to this racket?
Yes, i think so, because i too have attached a 5v but just used a battery in case of emergency. You can directly attach a 5v adapter and skip the battery & charging module.
GOODTECH - Creativity and Science thanks for the reply sir. when i connect 5v adapter direct to racket all the capacitors produce too much heat...
What is the issue Sir?
There must be a problem with the polarity of the adapter. Make sure that the polarity of the circuit is correct.
no ! the converter in tazzer racket cant get enough current (A) from 5v adapter because most 5v charger adapter only have current rating 1A - 2A only, while the Li-ion battery have approx max current until 40A.
I suspect that's not the main issue. That circuit is expecting a lower voltage between 3-4.2v max and is clearly upset at the higher voltage (usually 5.6v) that the mobile chargers usually put out. My advice is if you still prefer to use a charger without a battery connected to it (I clearly don't know why) which actually is the best option, then assuming that the said charger is able to deliver the asking current@least 5 or more amps(This is important as many chargers may just not be up to it), then you should take the precaution of feeding it through atleast one or two common silicon diodes to be wired in series in the proper polarity (there is a white band on the kathode) any part number like 1N 4001/2 etc onwards. This drops the incoming voltage in precise levels of usually .6v each so the two of them should give a voltage drop of around 1.2v that the circuit is expecting, and also preferably fix a capacitor of reasonable capacitance like 1000mfd onwards till about 2,200uf(mfd) of any working voltage greater than 6v to about 25v. This should keep the whole thing in proper running condition. BTW do try to use a battery though, and if you are having difficulty locating that 18650 LiOn cell you can try the tiny lead acid double cell tiny batteries that can be found in emergency lights. Another better option is to locate a mobile battery having a capacity of atleast >1500mA or more (The terminals on these batteries are pretty touchy and flimsy. Soldering wires onto these terminals requires considerable soldering knowledge and dexterity to execute a quick, clean and perfect job. Don't do it if you don't have the acumen for it and you're better off getting the job done by your friendly neighborhood mechanic.... Happy building and have a nice day....
sir light blue colour ki he lagani ha kya
Its ultraviolet, some insect are attracted to ultraviolet lights.
Not a good idea, how to charge the battery
how to make a mosquito killer out from a product which is already a mosquito killer..
the wire grill should be replaced with a screen.. because the wire grill has large openings were the insect can fly clean thru.. a screen would prevent this from happening.. it would also be that much more effective as well..
Wow!
I need one!
Costs 5 dollars? Hehehe...
how mosquito die with that ?
In same way as it does with bug zapper racket.
Throw the blue box to the mosquitoes
mosquito attracts by blue light , and enter into the box ,it will shot and die
Wait for the mosquito to land on your head, then smash it with that box with full power
Don't you get it? Mosquitos will die laughing at this!
how much nm UV LED??
@mstgnck thanks..
365-375 wavelength...
What about result? Can trap atleat two mosquitos by using this system?!!
M order kr na chata hu bt do pls
CAN YOU TRY THE EFECTIVENESS OF THIS FUCKING THING????
Not working merde this video
just add a fan in here
Without the benefit of research and just relying on Common Sense.
One could just go out and buy a bug zapper instead.
Then why the hell are u watching this DIY video huh?!!
That looks very complicated to me like it it could be easier like easier like can't we just leave the damn thing together and stick it in there anyway yeah good video but too complicated
Cool
is this 5 min crafts
hobby shops mean?
The shops that make science and crafts projects for school children.
not at online locally wer did u buy heat shrinking tubes plsss tell me the answer plssssss
These are available on electronics and local hobby shops.
1:11 PM
I am your 43 viewer
Though you show it easy...
But difficult make at home
wow
It doesn't not work, I have ready made one
Better not seal it as a box just mix something to create CO2 in a bow or bottle and cover them .
Esmein mossor nahin gusega
Mosquitos are watching...
Yeh lithium kitne ka h aur kahan se kharida
I removed the lithium ion cell from an old laptop battery. It is also available online in varies price range. You can get one in around Rs. 350
Sirjee then lithium ko 18650 kehte hain. Aur ye to Mamuli item hai aur issey koi bhi electronic spare parts ki dukaan mein paya jaa sakta hai. Yeh 3.5v(khali ya khatam) se 4.2v (full charged) aata hai. Yeh nahi mila to aapko emergency light ki (choti si) lead acid battery bhi istimaal kar sakte ho. Aur ek option hai. Aap Ko mobile ki battery (>1500mA) bhi Laga Saket hai. Yeh Saab wahi kaam usi tarike se kar sakti hai..Umeed karta hoon ki aapko yeh nuska khafi maddat aayega...
I was expecting a flamethrower as the end product. Disappointed
🤣
Hey GOODTECH
can you make me one
I can guide you how it can be made. I also make detailed written tutorials with additional important information about all my projects, have a look - www.instructables.com/id/Mosquito-Killer-Machine/
This tutorial will surely help but if you need any guidance, you can also contact me through my email or facebook.
I need abstract of this project broh
so ? what the heck r u done?
Foreign made. Does not work in the USA.
Sabka ek hi video bat Kho dibba me lagao agar dibbe me lagana hota to admi bat hi le lega
Or fir dibba me kyo lage
Alag bano
Box direct power
Charger se
Fan candencer se
Regulater se
Ghar me hi jugad se ban jae
They already make these, they're called bug zappers.
This is how you make at electric shop
Khuch hat ke banao
Iss cantent se UA-cam bahara
Aisia mosquitoes kill machine banao
Jo insan khud ghar me product se direct power se chalne wala ho
Very sketchy techniques
at home....who the hell has all those things at home?
All those things??!! Dude u just need an old mosquito bat and some cardboard thats it
not good
W
This will Never work. Don't waste your time people.
Sir.thank u very much ur quick response. I never expect very soon reply.anyway weldon. If i ask any doubts in ur other videos, i expect ur reply. Sir can u send ur e-mail id to my mail. Thank u. God bless you.
You are welcome
Jla ( burn) Kar k marna kisi bhi mahlooq ko Islam maim hraam or gunahe kbira ha don't use this
Useless
Faltoo bakwaas. Kaun itna sab karega. Isse accha to mosquito racket easy to use hai.
Yeah..you are right. But i made this so i can sleep peacefully just by placing it near me and it takes care of the mosquitoes.
waste