Don't worry about comments on your english. Remember, those people can't speak your native language and if they did, they would be the same as you speaking english. People are ignorant.
You start off by telling us (eventually) that you have two iSCSI targets attached to your ESXi host without demonstrating how to do it. I wish that was included in your "Step by Step".
At minute 21:20 the 2 listed datastores are from the previously configured iSCSI configurations. You should have 3 listed there. Your configuration is incomplete, but the proof of concept is (partially) useful anyway.
Hi, just would like to update that on the virtual switch1 mapping did not work me so did a port grouping of both the virtual switches 0 and switch 1 and finally was able to map the vol to the datastore. Thank you!!
how do you assign scsi target disk to more than one esxi host, I added 3 esxi in target and able to see raw disk in each esxi, formwat on one esxi but that datastore is not aprearing on other two host automatically ?
what if i have mpio configured? do i need to connect it with 2 addresses to the v center? also the i.p address for the v switch is that just a random i.p address?
Pliss tutorial high availability about vmware new version (step by step). Because i want lesson high availability on vmware exsi. Thanks you (sorry rip : speak my english ) 😂
Nick, these are nice videos you are sharing to help others but please, 12:55 stop saying this is a lab therefore you are using a single adapter but in real life, we should use 2 NICs. That kind of sayings are wrong. If you are doing it, then do it right because it is what you learn and practice is what you implement.
@Rakesh Please read my recommendations properly. I did not say he was wrong but he has to do the labs as if it is in a real life. You get use to doing things in a lab.
I don't have words to express how useful these videos are for someone who is trying to learn vmware
Thanks buddy, through your video i was able to configure isci datastore in vsphere
Thank you SIr. Very useful information (12:29).
Don't worry about comments on your english. Remember, those people can't speak your native language and if they did, they would be the same as you speaking english. People are ignorant.
Thanks for the information Nick!
Thanks a lot, is very good your explain!!!
Excellent tutorial!
just what i was looking for.
You are the best
You start off by telling us (eventually) that you have two iSCSI targets attached to your ESXi host without demonstrating how to do it. I wish that was included in your "Step by Step".
No worry about your English. 20-30mins long video is quite good. Otherwise there is not enough information.
At minute 21:20 the 2 listed datastores are from the previously configured iSCSI configurations. You should have 3 listed there. Your configuration is incomplete, but the proof of concept is (partially) useful anyway.
Good explanation! :)
Thank you very much
Hi, just would like to update that on the virtual switch1 mapping did not work me so did a port grouping of both the virtual switches 0 and switch 1 and finally was able to map the vol to the datastore. Thank you!!
thanks a lot
thank a lot
how do you assign scsi target disk to more than one esxi host, I added 3 esxi in target and able to see raw disk in each esxi, formwat on one esxi but that datastore is not aprearing on other two host automatically ?
If we need to enable HA, should we populate our VMs in ISCSI shared storage or can we store them in local storage in the active host?
Hi bro,can we do vmotion directly after isci storage configuration done.
what if i have mpio configured? do i need to connect it with 2 addresses to the v center? also the i.p address for the v switch is that just a random i.p address?
if i use a NAS for ISCSI storage will that be slow?
whats that overlay in the corner?
Sir, I want to configure target storage in my Esxi 6.7 but without vCenter. what is a process, please explain.
Pliss tutorial high availability about vmware new version (step by step). Because i want lesson high availability on vmware exsi. Thanks you (sorry rip : speak my english ) 😂
Coming coming!
I waiting 😄. Help me i need high availability on vmware. I beginner
This is an old video but man I couldn't get past the first 2 minutes. Whine!!!
you talk wayyyy tooo too much my guy just get to the point
Too much talk not enough action!!
too much taking and not enough content
Nick, these are nice videos you are sharing to help others but please, 12:55 stop saying this is a lab therefore you are using a single adapter but in real life, we should use 2 NICs. That kind of sayings are wrong. If you are doing it, then do it right because it is what you learn and practice is what you implement.
@Rakesh Please read my recommendations properly. I did not say he was wrong but he has to do the labs as if it is in a real life. You get use to doing things in a lab.
Good video, but could have been way shorter.
dude thx for videos...but stop champing, it is really annoying!!!!