Це відео не доступне.
Перепрошуємо.

2 stroke exhaust pipe dent repair - Peugeot Fox Deluxe 50cc racer part 2

Поділитися
Вставка
  • Опубліковано 25 лис 2022
  • #motorcycle #moped #racing
    --Playlist--
    Peugeot Fox - • Peugeot Fox Deluxe Rac...
    Vespa Piaggio Ciao - • Vespa Piaggio Ciao
    BRIXTON Felsberg 125 - • BRIXTON Felsberg 125
    LITTLE MONSTER - • LITTLE MONSTER
    PEUGEOT 103 RCX - • PEUGEOT 103 RCX
    follow me on
    UA-cam - / @semke88
    FACEBOOK - / semke-363433694033967
    TWITTER - / semtexout
    Instagram - semke88
    TIKTOK - www.tiktok.com/@semke88?lang=en
    -- music was provided by NCS --
    Wontolla, Kasger & Limitless - Miles Away [NCS Release]
    - • Wontolla, Kasger & Lim...
    Wontolla
    - SoundCloud / iamwontolla
    - Facebook / wontollamusic
    - Twitter / iamwontolla
    Kasger
    - SoundCloud / kaspergerlif
    - Facebook / kasger
    - Twitter / kasger

КОМЕНТАРІ • 5

  • @remibeheydt7484
    @remibeheydt7484 Рік тому

    Zeer proper werk👌

  • @yannickvandeveire4360
    @yannickvandeveire4360 Рік тому

    Proper! Al een heel verschil met wat het was! Zolang de uitlaat doet wat het moet doen.

  • @BigEpinstriping
    @BigEpinstriping Рік тому

    If you wanted pretty you just buy a new exhaust. Your welds are fine. I've seen worse fixes for a 2-stroke pipe. Next time, you could try making a flange adapter and plug so you can use an air compressor and a torch to take out those dents. Or you could use a stud welder and a slide hammer to pull the dents. cutting, hammering out dents and welding is the old school way to do it, but it still works, and I think you did a fine job. You could paint the exhaust black and it'd look very nice too.

    • @semke88
      @semke88  Рік тому +1

      we were able to buy this exhaust for 10 euros so it would never be really pretty. I don't have many tools in the workshop so I have to make do with what I have. the next upgrade i would buy is a torch . but for now it is not in the budget . I like the old school way. but I still have a lot to learn and use the right tools. knocking out dents with an ordinary hammer is not the right way. but i have to work with what i have . even though it was the first time and I'm not 100% satisfied with the results. thanks anyway for the positive response

  • @theshadeofficial
    @theshadeofficial Рік тому

    Kben content, een uitlaatje van 10 euro en is ook niet het belangrijkste momenteel. 😁