To the haters: I used the reRack and it works great. Neither I nor the creator was trying to extend the dishwasher for another 10 years, just limp it along a few extra years, and get some extra life out of it. That's what the reRack is good for. Sure you "should" sand it down to bare metal, but that's not the point. It's just to slow down the process. Both he and I know it didn't "eliminate" the rust, just gave a few years of extra usage out of an appliance that was on its way out anyway. The reRack works great for that, just temper your expectations. Or buy a new rack altogether.
Why would a dishwasher be on its way out just because the rack is rusty? Mines perfectly fine after 6 years except for the rack rust. I'd like to fix the rack and get another 10 years out of it without paying the scam 10000% markup of a replacement
I just cleaned my dishwasher filters and thought I would just order both rack replacement. Until I saw the $366 price tag to replace them. At the price I might as well purchase a new dishwasher. My dishwasher runs fine. However, heading into the holidays I just can't afford a new appliance at this time. Thank you so much for the information I will be using this method to push me through the next several months. Great Information!!!!
Used a rerack product with tips. Still it comes back. I quess if tines get knicked rust starts. I'm going to try a rust converter first next time then the rerack. Rust like a cancer if you don't get it all comes right back. Nice video
To have lasting results #1 where you see the rust (rack degrading) the existing coating will have to be removed until you reach bright metal, the rust on the existing metal (wire) must be removed completely, this will require sandpaper, good wire brush and depending on one's ability a power drill for wire brush will do the best job as to returning metal to bright state. #2 After all rust is removed one may desire to give a cleaning with (take precautions) muriatic acid and examine metal carefully especially if pitted that all rust has been removed. #3 Final item is to clean thoroughly to remove (baking soda rinse) all traces of acid. Now you can apply coat and be reasonably sure your work (yes hard work) reaps rewards. I am sure there are several other fine methods for achieving desired results, but rest assured all will require maximum effort for long lasting repair and few dollars well spent.
To anyone who thinks they can use the spray paint- to make it easier - Please do not use the plastic dip spray paint to repair the dishwasher or any areas that come in contact with food. This product is specifically designed to be used on areas that come in contact with food. The company made it clear that the spray paint versions are harmful if ingested- as they were not designed to be used where food can be in contact. Only use products that are specifically noted they are designed for areas that will come in contact with food
I remember a discussion about this on a forum. Premature rack rust can be an indication of people pre-rinsing... what happens is the dishwasher detergent enzymes need food particles to work on. If those aren't present...it starts attacking the racks and etching dishes even...When I say don't pre-rinse. I'm not talking about dumping half a bowl of soup or oatmeal in the dishwasher. I'm saying if you finish the bowl, don't rinse it, put it in..same with dinner plates or pots/pans... the one exception for me is EGG residue or raw meat juices.....that I will rinse off... I run a load about every 4 days. I wait until it's packed full...so there's dried food on the dishes while they wait to be washed... everything comes out spotless with the occasional peanut butter on a knife that might not come completely off.
In essence, you are painting over rust. If the rust isn't removed it will continue to degrade the metal underneath! You should be sanding off, or using a dremel to remove all surface rust prior to painting!
I want to ask can I use this paint just for protection before rusting ? I just have a new one & I want to keep it from rusting and if I use epoxy paint is it harmful ?
Much of the rust is not due to wear or damage from items in the dishwasher, they originate at the places where the steel pieces are welded together. If those places are not prepped correctly when made and before the vinyl coating is applied, the corrosion will gradually start and spread, causing the coating to bubble and break apart. You can spend a lot of time doing this kind of repair, only to have more areas show soon after. I just threw out a six year old LG due to rusted racks, when LG refused to stand behind the product and they had the audacity to charge over $600 for replacement racks. I replaced it with a Bosch, who at least warrants their racks for five years and sell replacements for a third of what LG charges.
Website says you can tint these with items you can find at you local hardware store. What would the product be? Vinyl Dye? Food grade and dishwasher safe?
To those that say you have to completely remove the rust...good luck with that because i say its impossible and ridiculous to think you could remove that kind of rust from a wire..sure you canclean it up some but remove..impossible
Be sure to read all the comments, if at all possible. We already have too much plastic in our bodies because we don't pay enough attention to the plastic that touches our food and we then eat without washing. It's scary what legacy we may be leaving our kids. Thank you to the commenter and the reminder regarding plastic and be safe!
As mentioned in the video, when the vinyl coating is damaged, such as by a knife or other sharp implement, and exposes the stainless steel underneath, it will start to rust. Stainless steel is not impervious to rust.
@@Patrick_Ross I wonder, what about using the steel they use for the dishwasher "room"? It does not rust for a reason, I assume it is a different type of stainless steel?
All dishwashers will do this and rust like that..its unavoidable unless you find a dishwashers with heavy racks made of something other than rubber coated steel...And the price of a new rack is almost the cost of a new dishwasher
I was able to buy liquid plastic that was water proof to fix the racks about 6 months ago and coat some of the bad spots...holding up pretty good..but thanks for the info@@home-space
Replacement racks are ridiculously expensive/overpriced. This stuff is likely best used if you catch a break in the coating early. But that entails monitoring them regularly & nobody does that. I'll just use them till I cant stand it anymore & replace the dishwasher which otherwise works like it did when new. I really thought when I bought this unit the racks were made of some kind of new corrosion proof material. Silly me for kidding myself. Planned obsolescence.
You cannot. It states on the container as well as the company bc I called thinking I could do that. And they made it very clear that it was not made to be used on products that come in contact with food surfaces. The heat from the dishwasher would continue to release chemicals onto the food contact surface areas creating chemical layered surfaces that could be harmful or fatal when food makes contact and then ingested.
@@Supra_Na96 ohhhhhh! I was literally weeks from sanding my dishwasher rack and painting a plastic layer on it, it leaves rust spots on my nice white plate set.
@@amberfrazier575 yea don’t use that spray paint Lol I was going to do it too and got a wild hair and decided I’ll call the number to be safe and glad I did.
@@Supra_Na96 Do you know if there's a rubber or vinyl spray that you can put on a dish drainer, like one you drain your dishes on in the sink? Mine has some kind of plastic coating on it but it's coming off.
@@jude7321I know exactly what you’re talking about. Happened to me too. I just bought these silicone straws that open down the sides for easy cleaning and cut them to the size of the spots that had coating coming off and then closed the seams up on the straws. Let me see if I can add a link to the ones I got
To the haters: I used the reRack and it works great. Neither I nor the creator was trying to extend the dishwasher for another 10 years, just limp it along a few extra years, and get some extra life out of it. That's what the reRack is good for. Sure you "should" sand it down to bare metal, but that's not the point. It's just to slow down the process. Both he and I know it didn't "eliminate" the rust, just gave a few years of extra usage out of an appliance that was on its way out anyway. The reRack works great for that, just temper your expectations. Or buy a new rack altogether.
I'm interested in using this product BECAUSE a replacement rack is $70+ and it's not even the same design.
I'm here because we're definitely going to get a new dishwasher within a year or two but I'm tired of rust stains on the dishes.
@@matteighm Consider yourself lucky.
Depending on the brand the racks are 150-200€ each. That's up to $230-250. 😬
Why would a dishwasher be on its way out just because the rack is rusty? Mines perfectly fine after 6 years except for the rack rust. I'd like to fix the rack and get another 10 years out of it without paying the scam 10000% markup of a replacement
@@HamidKarzai Not to mention, today's appliances are junk and only last about 3 years
I just cleaned my dishwasher filters and thought I would just order both rack replacement. Until I saw the $366 price tag to replace them. At the price I might as well purchase a new dishwasher. My dishwasher runs fine. However, heading into the holidays I just can't afford a new appliance at this time. Thank you so much for the information I will be using this method to push me through the next several months. Great Information!!!!
If you do it right (sanding down to bare metal to remove as much rust as possible) it might last even longer.
Thank you. Frustrated with rust spots on my new dishes. This will fix
Used a rerack product with tips. Still it comes back. I quess if tines get knicked rust starts. I'm going to try a rust converter first next time then the rerack. Rust like a cancer if you don't get it all comes right back.
Nice video
To have lasting results #1 where you see the rust (rack degrading) the existing coating will have to be removed until you reach bright metal, the rust on the existing metal (wire) must be removed completely, this will require sandpaper, good wire brush and depending on one's ability a power drill for wire brush will do the best job as to returning metal to bright state.
#2 After all rust is removed one may desire to give a cleaning with (take precautions) muriatic acid and examine metal carefully especially if pitted that all rust has been removed. #3 Final item is to clean thoroughly to remove (baking soda rinse) all traces of acid. Now you can apply coat and be reasonably sure your work (yes hard work) reaps rewards.
I am sure there are several other fine methods for achieving desired results, but rest assured all will require maximum effort
for long lasting repair and few dollars well spent.
Great review
Thanks for the video
To anyone who thinks they can use the spray paint- to make it easier - Please do not use the plastic dip spray paint to repair the dishwasher or any areas that come in contact with food. This product is specifically designed to be used on areas that come in contact with food. The company made it clear that the spray paint versions are harmful if ingested- as they were not designed to be used where food can be in contact. Only use products that are specifically noted they are designed for areas that will come in contact with food
I remember a discussion about this on a forum. Premature rack rust can be an indication of people pre-rinsing... what happens is the dishwasher detergent enzymes need food particles to work on. If those aren't present...it starts attacking the racks and etching dishes even...When I say don't pre-rinse. I'm not talking about dumping half a bowl of soup or oatmeal in the dishwasher. I'm saying if you finish the bowl, don't rinse it, put it in..same with dinner plates or pots/pans... the one exception for me is EGG residue or raw meat juices.....that I will rinse off... I run a load about every 4 days. I wait until it's packed full...so there's dried food on the dishes while they wait to be washed... everything comes out spotless with the occasional peanut butter on a knife that might not come completely off.
the problem is mine already snapped off for the wheels so the wheels bend when weight it put on it do I have to reweld it?
In essence, you are painting over rust. If the rust isn't removed it will continue to degrade the metal underneath! You should be sanding off, or using a dremel to remove all surface rust prior to painting!
I'm not a chemist, but rust requires oxygen to form, so shouldn't a proper coat prevent further formation? Bacillus is aerobic bacteria.
Replacement rack was about $130. I will go with this product instead and limp it along for another few years. Thanks!
I want to ask can I use this paint just for protection before rusting ?
I just have a new one & I want to keep it from rusting and if I use epoxy paint is it harmful ?
Much of the rust is not due to wear or damage from items in the dishwasher, they originate at the places where the steel pieces are welded together. If those places are not prepped correctly when made and before the vinyl coating is applied, the corrosion will gradually start and spread, causing the coating to bubble and break apart. You can spend a lot of time doing this kind of repair, only to have more areas show soon after. I just threw out a six year old LG due to rusted racks, when LG refused to stand behind the product and they had the audacity to charge over $600 for replacement racks. I replaced it with a Bosch, who at least warrants their racks for five years and sell replacements for a third of what LG charges.
All appliances in Canada give ONLY1 year warranty including the Bosch😡😡😡😡😡😡😡
Where do you buy new racks?
Wow is SO COOL
How old is the DW?
Website says you can tint these with items you can find at you local hardware store. What would the product be? Vinyl Dye? Food grade and dishwasher safe?
why the f they dont make the racks aluminum then put the coating on
Should you use sandpaper to remove some or the rust?
I would and then spray the whole rack with a plastic spray paint.
nice
To those that say you have to completely remove the rust...good luck with that because i say its impossible and ridiculous to think you could remove that kind of rust from a wire..sure you canclean it up some but remove..impossible
I'm unsure if removal is even necessary since rust requires oxygen, and a vinyl coating would kill the aerobic bacteria.
Isoprobic alcohol?
Be sure to read all the comments, if at all possible. We already have too much plastic in our bodies because we don't pay enough attention to the plastic that touches our food and we then eat without washing. It's scary what legacy we may be leaving our kids. Thank you to the commenter and the reminder regarding plastic and be safe!
What is the polish name ??
ReRack
@@SunFlowersCutie On Amazon for 10 dollars and change for a bottle.
There is also a grey version of the ReRack.
Never been able to find it.
@@wookiegoldberg I bought one on Amazon last year.
Edit: And there is at least one other brand that also makes it (Anvil Rack Repair).
This got me to thinking. I came up with using duck tape. stick the sticky side to itself. I'm pretty sure it'll work.
Not healthy - not food grade.
I just grind it off and coat it with epoxy.
Sand it down
why cant these famous American dishwasher manufacturers make rust free stainless steel racks ? Even a 5 year old knows that!
As mentioned in the video, when the vinyl coating is damaged, such as by a knife or other sharp implement, and exposes the stainless steel underneath, it will start to rust. Stainless steel is not impervious to rust.
@@Patrick_Ross I wonder, what about using the steel they use for the dishwasher "room"? It does not rust for a reason, I assume it is a different type of stainless steel?
Planned obsolescence. That way they get repeat customers so the money keeps coming in 💰
All dishwashers will do this and rust like that..its unavoidable unless you find a dishwashers with heavy racks made of something other than rubber coated steel...And the price of a new rack is almost the cost of a new dishwasher
Not all will do this, some use special hard coatings. Asko and Bosch ones I have had that were over 10 years old didn't rust.
I was able to buy liquid plastic that was water proof to fix the racks about 6 months ago and coat some of the bad spots...holding up pretty good..but thanks for the info@@home-space
Replacement racks are ridiculously expensive/overpriced. This stuff is likely best used if you catch a break in the coating early. But that entails monitoring them regularly & nobody does that. I'll just use them till I cant stand it anymore & replace the dishwasher which otherwise works like it did when new. I really thought when I bought this unit the racks were made of some kind of new corrosion proof material. Silly me for kidding myself. Planned obsolescence.
This is useless. Wasted two pots on repairing mine, and after few weeks it was again rusted.
You can buy plastic spray paint and do the whole thing….
You cannot. It states on the container as well as the company bc I called thinking I could do that. And they made it very clear that it was not made to be used on products that come in contact with food surfaces. The heat from the dishwasher would continue to release chemicals onto the food contact surface areas creating chemical layered surfaces that could be harmful or fatal when food makes contact and then ingested.
@@Supra_Na96 ohhhhhh! I was literally weeks from sanding my dishwasher rack and painting a plastic layer on it, it leaves rust spots on my nice white plate set.
@@amberfrazier575 yea don’t use that spray paint Lol I was going to do it too and got a wild hair and decided I’ll call the number to be safe and glad I did.
@@Supra_Na96
Do you know if there's a rubber or vinyl spray that you can put on a dish drainer, like one you drain your dishes on in the sink?
Mine has some kind of plastic coating on it but it's coming off.
@@jude7321I know exactly what you’re talking about. Happened to me too. I just bought these silicone straws that open down the sides for easy cleaning and cut them to the size of the spots that had coating coming off and then closed the seams up on the straws. Let me see if I can add a link to the ones I got