Dude its simple, to be able to do this for 8 or more hours in blazing heat is another thing. Ive been to er 3 times for heat exaustion. Lots of people are this fast . but for how long?
Let’s ignore the fact he isn’t getting a nail in until 12” past the right side and only putting 4-5 nails in each shingle. Wind damage on this roof 100%
I’ve personally worked with this man, I currently work for the company he has moved on from. I can say that my man can lay them down. He wears rope, harness, glasses and bags. Uses his gauge on his gun to manufactures exposure, starts on his second nail ten inches in to benefit his gun placement since his gun is already gauging the shingle right underneath. He puts his 5th nail through at the end, always on the mark. To put all the comments to rest, he pulls out his hammer and hammers down any high nails. I’ve worked with him and his brother and I aspire and learn from them every day to be the best roofer I can be. Washington state roofers represent
galbavy21 I’ve been shingling fresh out of high school, I’m getting faster but I’m still working on quality of nail placement and straight lines before I bang them out like him. He’s on another level, and his lines are prefect. His reveal on his ridge cap is always straight across the deck with no chalk line, he’s on another level
This guy is one of the best shinglers I've ever witnessed. Fast nailing Correctly placed nails He doesn't WASTE COMPANY MONEY ON HAVING SOME ONE PASS HIM SHINGLES! This man is a siriouse example of hard work Dedication And self discipline. Who ever this man works for is varry lucky as well as the customer who is receiving the Roof. Great Job Brother. Your the real deal Mad Respect From Santa Rosa, Ca
I am a homeowner with a day job who does not do anything construction related for a living. That being said I am working on framing out my basement and Bought this ua-cam.com/users/postUgkxHQsUrwNr5GQrnx9V4xDdUr56qxwuiBHt gun. I have done a few walls already, have probably shot a couple hundred nails through this thing and have yet to have a misfire. It works awesome, good depth on every nail if you have your compressor set right. My literal only complaint is that it is a bit heavy and my arm can get a little tired especially whrn I am nailing at odd angles. That being said I am super happy with it and would buy it again. Hoping the old girl allows me to get my whole basement finished out!
This guy is 💯. He isn't really pre set up. He didn't put all shingles same way. Nails look proper. Half of"fast roofers" on UA-cam put it so they have the best odds or their nails are improper. This guy is official. Hats off to you
Give this guy a damn medal. This is Phenomenal. This is Fast and amazing quality. I had a hard time consuming the fact that he landed 99% of his shots on spot and never went off course. Legend man.
He actually missed a lot. Over nailed it in the middle and nailed it too far back from the edges. Go back and stop the video. You'll see. That roof won't meet the manufacturer's requirements for a warranty. 2"-3" from the edge is unacceptable. I know, I'm a roofing inspector with 35 years of experience a 2nd generation roofer. 😉
@@YankeeWoodcraft what you are saying is true but with 35 years that means you know that nails are not the most important thing to keep the shingles on the roof if the tar dose not sick you can put 10 nails and it will still blow off. from what i have see most people dont have the right nailing pattern any way the nails are to be evenly spaced on the shingles. with that being said this guy is still fast and if he would get used to nailing different he would still be just as fast.
Our boss has the same no matter where you go I'm from Baltimore and I've been roofing for 30 years they've been like that every day of my life every job.. every job they're in the red!!
The guy that has the worlds fastest shingler channel really needs to see this guy, this guy is seriously fast and exacting, I’m a fast shingler myself, but this dudes another level, notice how his gun stays as close to the roof as possible, he’s using the same cadence every time , damn good video,, this is for all them arrogant roofers who think and brag about being the fastest,,,
The world's fastest Shingler iz kinda arrogant. I commented on this guy on his channel n his feed back was very negative. This guy iz fast n clean work
Alex Mares that’s what kinda pissed me off about that jimmy kimmel look alike.... when I said he was always bragging, and having that tittle ,was wrong, he didn’t like that, he’s always bragging, which is irritating in itself, this guy and a lot of others are fast like this, the bottom line is that,, how long can you keep that up and do you work every day, I work everyday , when you don’t work everyday.. you get a chance to get more rest, Guys get paid , then there gone for three days and broke
@@johnbailey2024 yes I'm a roofer myself n i had made a comment to him that I've seen faster roofers than a competition he did n calling all roofers that wer fast.he replied asuming that there's no possible way they could b faster but they could b sloppier.i understand he may b a stubborn roofer not open top learning
Takes full advantage of the bounce in those basstadges. I know it well. But I could never control it. That's some surgical shyyt. Nothing but money. I bow.
dude is insanely talented, I will admit that, I could never hope to be that fast, however he starts nailing about 1/3 of the way in so there is a large piece of each shingle on the outside edge without a nail in it.
@@MathieusTheWalkingWitness its abut reach and ease of movement, its slower to reach over to the edge nail, hes basically hovering over the part he wants an d banging them off.
Calls Boss man before he gets to job site "Yes sir I've finished shingling the roof can I go home for the day?" Boss: "The fuck? It's only 9:30 in the morning!
Now this is a damn good roofer rt here. I'm not a roofer I'm a sheet metal worker but I've seen some great roofers in the field and this guy rt here is showing great work ethic
Your speed comes from how fast and consistently you can place the shingle before you nail it.... the machine what they used to call me and I would say the same to this man.... a machine... speaking from experience 25 years later your back hurts every day😪😪😪
@Eddie Yochim I guess I'm one of the lucky ones I'll be 58 next month and I'm in the middle of hand nailing 47 square roof.... don't get me wrong I do hurt and wake up stiff😎👍👍👍
Are you fucked? Half are high nails aka above the nail line/ double laminate. just cause there not face nails don't mean there strait or perfect the stager is way to small as well should be about 10 inches not 6.
@@buildurtruckurway9118 hes installing high grade shingles which ALL have a wide nailing strip that allowed a wider target . Stop bitching that hard worker
@@joeb787 lmao those do not have a 2 inch nail strip. You obviously don't know shit, even on say a malarkey, an owns Corning duration an Iko dynasty ect all shingles with a true 2 inch double laminate still require the nail as close to the line as possible. Haha its not a race track with 2 extra lanes. Also a proper manufacturers nail pattern is either a 4 nail or a 1. 2. 2. 1 not 5, not a strait 6. Going that fast I guarantee one out every 3 nails isn't flat I know from 11 years real world experience and making idiots rip shit off. It's called standards and if you don't stick to them your just a hack like the rest end of discussion.
Would love to see the overall end of the job probably not straight no nail in the end the but ends look gap. Would love to see that nail pattern and how many shiners he gets.
I love how he actually uses a safety harness. I would love to have had one when I was young. I know a guy who broke both his ankles from falling off a roof. He still has pain.
Him and I shingle just about the same but were required 6 nails . From my dad my uncles my brother's, I'm the only one that up and bent over. Uts faster I believe
Dude is definitely a Beast however the steps I feel are too short and some of his nails are further than an inch from the end of the shingle. Not taking nothing away from his skill he is definitely one of the fastest Shinglers I’ve seen.
Anybody know what manufacturer of the gun he is using? I’m a retired journeyman electrician so my hats off to any tradesman. Jeez…he even changed the coil of nails fast!
@@dillonnj45l.18 Lol Rigid coil nailers may be lighter but they are junk.Dont last very long if you lay many squares everyday.If you only do shed roofs on the weekends you may be ok with rigid..lol Hitachi is ok but when they wear they shoot the nails in crooked...bostich is best.Especially for the price...My opinion.
@@Shift1dwn5up ive only done 600+ squares on the ridgid gun so far it's been great other than it doesn't shoot ridge cap nails for shit jams every other nail its lightweight and faster than any other gun ive used but we'll see how long it last
Hitachis are the fastest, or they were a few years back. I have both, the bostitch is slower and more cumbersome somehow. I have thousands of hours on both. The bostitch is like a truck and the hitachi is like a motorcycle.
Those safety lines should have a tensioner so there's not so much slack.If he fell he might as well hit the ground instead of hanging upside down 1ft from the ground.
This is 100% the same way I do it. I'm not much slower then him. I love seeing people stip the first outside nail. Then hitting it at it's butted up to the next. Fast as fuck.
in order to nail like this ...you have to increase the pressure of the air compressor...so half of those nails are too deep inside the shingle. Good technique by the way ...decrease the pressure , you'll nail slower but your nails will be just at the right dept.
What in the hell did I just read. We use a rollair Gas compressor. Never had to increase anything. 6 of us nail like this at once hooked up to the same compressor with no issues, all nails at the right dept.
Yep. He's quick. I'm not too shabby, but i like running out the horizontal farther. I'll run 3 rows (or whatever i can reach comfortably) across at a time. Then move up n do it again.
cnvw974 you leave a gap between nail one and two so you can put the seam of the 2 shingles above in the gap. This creates a nice area for water to pass through without fear of a leak. If you had a nail on or really close to the seam it would create potential for a leak down the road.
Make sure even if your the only one hooked up to the compressor add a extra take to get more presure in the hose and not let the gun lag or not nail correctly like a couple of times but besides that nice nailing you must be charging somewhere between 40 too 45 per square
No se trata de aserlo muy rápido se trata de que lo hagas correctamente es mi opinión Dios bendiga a toda las personas que pasen su trabajo correctamente.
I've watched this video 2 or 3 times and I've been trying to not comment. not be bashful. and I've actually tried to focus on the good in this video because there is some good. he's a very fast roofer. his shingles are probably straighter than you'd think. but my computer just cleared up and a lot of those nails aren't even close to where they should be. nails 2-4 are all over the board and the 5th nail he puts in the end of the shingle in the last run is closer to the seam than it is the edge. I wouldn't let him shingle LIKE THIS on my job. nail placement is key. I would tell him to slow the gun down a touch, put the dang nails where they go (at least 3 or 4 out 5 lets be real roofers here!), or come watch me do it. he's an animal for sure. but if you watch my videos, the nail placement is always correct, and I'm not blasting through the shingles as quickly as I can. anybody can slap on a square like this in no time w/o good quality and if that's all the point to this video was then well done.. but can you hold that pace all day? even for half a day, it won't last long believe me. slow is smooth, smooth is fast. good luck out there bud and shingle on!
@@principexyno yes sir LMAO I'm sure you've watched my other videos and saw me siding or framing with TOOL BAGS ON. tool bags require a few tools to be worth wearing. This guy didn't need a hammer or a knife... therefore...he carried around that pouch weight for no reason lol it'll wear on you throughout the day and the week. Roofing on a Walker needs a gun in your hand, a knife in your pocket, and as long as you have a good gun and well managed compressor pressure you only need a hammer nearby. Nails can be spread out strategically so that they're nearby when needed and with experience you can place your hose in the right spot that you won't knock off many if any at all.. if you like that extra dumb weight by all means keep the dang bags on. But watch me blowout these roofers next weekend in my own shingling competition and let's see how you really feel
@@franktib says the guy with a shy child as his profile picture... and liked videos are popular break dance moves from the 90's...btw.. if at 10 yrs old you didn't learn how to do the flare from your dad in the kitchen you don't need to learn now lol
As a retired GC, I could care less how fast you can lay shingles. I saw a lot of guys who were fast and a lot of guys who were good, but just a few who were fast AND good. Way more important to do it right than to do it fast.
I usually gotta think I'm just as fast, but damn. Fast & accurate 👌.. I know everyone loves Hitachi /Metabo, but that Bostitch don't play. !! What I'm currently shooting 🔫
If you watch closely he gets it when he’s nailing the next shingle. It’s much faster this way instead of reaching/stretching far right, more work slower time. So when he is nailing he is pretty much centered without reaching.
Jala con madre este vato, de los mejores que he visto. Los envidiosos que escriben aqui no saben ni pasar un plomo de una y media compa. No les haga caso. Sigale pa elante!
No es que uno no sepa,he trabajado con ruferos dis que profesionales y he visto las chambonadas que dejan ,no se trata de hacerlo rápido sino bien, es mejor calidad que velocidad.
Notice his nail line is always consistent and not all over the place despite his incredible speed. Good stuff. This man is legit.
gotta be with pabcos the nail line is max 1/2 inch wide
Dude its simple, to be able to do this for 8 or more hours in blazing heat is another thing. Ive been to er 3 times for heat exaustion. Lots of people are this fast . but for how long?
Let’s ignore the fact he isn’t getting a nail in until 12” past the right side and only putting 4-5 nails in each shingle. Wind damage on this roof 100%
@@outcastwreckreation6259 take a closer look and you'll notice he actually is
@@outcastwreckreation6259
Wrong, he is nailing it, at the end of the next shingle
I’ve personally worked with this man, I currently work for the company he has moved on from. I can say that my man can lay them down. He wears rope, harness, glasses and bags. Uses his gauge on his gun to manufactures exposure, starts on his second nail ten inches in to benefit his gun placement since his gun is already gauging the shingle right underneath. He puts his 5th nail through at the end, always on the mark. To put all the comments to rest, he pulls out his hammer and hammers down any high nails. I’ve worked with him and his brother and I aspire and learn from them every day to be the best roofer I can be. Washington state roofers represent
pabcos! jealous man that guys an animal im doing everything this guy did tomorrow at work and im gonna do it until i beat 430 its gotta be possible
Took me a minute, but I see how he’s landing that 5th nail. Pretty slick the way he does that
john orrick it’s all about conserving working per square! His gun is gauging right underneath the second nail in, just makes sense.
galbavy21 I’ve been shingling fresh out of high school, I’m getting faster but I’m still working on quality of nail placement and straight lines before I bang them out like him. He’s on another level, and his lines are prefect. His reveal on his ridge cap is always straight across the deck with no chalk line, he’s on another level
Holy shit! Mad respect I wish I could learn from them. Jesus id get paid more if I could work as fast as him lol I'm sadly just a labourer right now.
This guy is one of the best shinglers I've ever witnessed.
Fast nailing
Correctly placed nails
He doesn't
WASTE COMPANY MONEY ON HAVING SOME ONE PASS HIM SHINGLES!
This man is a siriouse example of hard work
Dedication
And self discipline.
Who ever this man works for is varry lucky as well as the customer who is receiving the Roof.
Great Job Brother.
Your the real deal
Mad Respect From Santa Rosa, Ca
Agreed he doesn't need a tosser, but holy crap would he fly if he did!
having someone toss shingles is a great way not to destroy the backs of your best gunners, cant see how thats a waste of money
I am a homeowner with a day job who does not do anything construction related for a living. That being said I am working on framing out my basement and Bought this ua-cam.com/users/postUgkxHQsUrwNr5GQrnx9V4xDdUr56qxwuiBHt gun. I have done a few walls already, have probably shot a couple hundred nails through this thing and have yet to have a misfire. It works awesome, good depth on every nail if you have your compressor set right. My literal only complaint is that it is a bit heavy and my arm can get a little tired especially whrn I am nailing at odd angles. That being said I am super happy with it and would buy it again. Hoping the old girl allows me to get my whole basement finished out!
This guy is 💯. He isn't really pre set up. He didn't put all shingles same way. Nails look proper. Half of"fast roofers" on UA-cam put it so they have the best odds or their nails are improper. This guy is official. Hats off to you
This man is making it look soo easy and he is consistent and not sloppy at all! Good job
That is one of the fastest most consistent guys on a gun I have ever seen. Incredible!
Look boss I did a square in 5 mins
Boss: great now I expect 3 square every 15 minutes
Hope ur makin a good buck working like that brotha. This man needs a raise .
When you’re roofing like this you’re getting paid by the square, if not you’re a sucker
As a roofer i approve this wow blows away anyone i know fast and still great work much respect
Very enjoyable to watch someone that is really great at what they do, hats off to you and your team
Give this guy a damn medal. This is Phenomenal.
This is Fast and amazing quality. I had a hard time consuming the fact that he landed 99% of his shots on spot and never went off course. Legend man.
He actually missed a lot. Over nailed it in the middle and nailed it too far back from the edges. Go back and stop the video. You'll see. That roof won't meet the manufacturer's requirements for a warranty. 2"-3" from the edge is unacceptable. I know, I'm a roofing inspector with 35 years of experience a 2nd generation roofer. 😉
@@YankeeWoodcraft what you are saying is true but with 35 years that means you know that nails are not the most important thing to keep the shingles on the roof if the tar dose not sick you can put 10 nails and it will still blow off. from what i have see most people dont have the right nailing pattern any way the nails are to be evenly spaced on the shingles. with that being said this guy is still fast and if he would get used to nailing different he would still be just as fast.
@@kelbybueckert8434 Agreed. If he got his nail placement squared away, I'd dare say he'd be even faster. I know I was when I was runnin' & gunnin'. 😉
@@YankeeWoodcraft manufacturers' warranties are asinine on purpose lmao
nothing wrong with that install
His boss is probably still complaining about how long the job taking and he's not making enough money 😂😂😂😂😂
Our boss has the same no matter where you go I'm from Baltimore and I've been roofing for 30 years they've been like that every day of my life every job.. every job they're in the red!!
Truth to that lol
Haha
🤣🤣🤣story of my life
Without a thrower, putting down the shingles at cyclic rate damn near. Big respect.
Thats what I've been thinking. If this guy had a good tosser he could go straight up the step with no hesitation.
Plus the tosser can be counting the nails so he can refill super fast.
I’ve been roofing for almost 20 years and this guy is a pro. A+
I love the people bitching about his gun "Mine is faster blah blah blah". That dude would smoke every single one of you.
Not me I’m 24 and started when I was 16!
“Every shingle one of you” hehe
I'll stick with trim and let the real men do the real work...
He would still have six nails left on a coil and I would be reloading
Post your "I'm faster" video or you're just a basement keyboard warrior.
Beast mode. Excellent demeanor. Fast. Effective. But also not rushed.
No Joke.
The fastes roofer I ever seen.
Nails are prefect.
This man is a one man army.
Thank you for sharing Bro.
nails are fucking shit hes like 2 inches above the actual line some times.
@@alsun35 and he starts like 8-10inches in
Faster than me and nailing straight. Beast mode!
The guy that has the worlds fastest shingler channel really needs to see this guy, this guy is seriously fast and exacting, I’m a fast shingler myself, but this dudes another level, notice how his gun stays as close to the roof as possible, he’s using the same cadence every time , damn good video,, this is for all them arrogant roofers who think and brag about being the fastest,,,
The world's fastest Shingler iz kinda arrogant. I commented on this guy on his channel n his feed back was very negative. This guy iz fast n clean work
Alex Mares that’s what kinda pissed me off about that jimmy kimmel look alike.... when I said he was always bragging, and having that tittle ,was wrong, he didn’t like that, he’s always bragging, which is irritating in itself, this guy and a lot of others are fast like this, the bottom line is that,, how long can you keep that up and do you work every day, I work everyday , when you don’t work everyday.. you get a chance to get more rest, Guys get paid , then there gone for three days and broke
@@johnbailey2024 yes I'm a roofer myself n i had made a comment to him that I've seen faster roofers than a competition he did n calling all roofers that wer fast.he replied asuming that there's no possible way they could b faster but they could b sloppier.i understand he may b a stubborn roofer not open top learning
John Bailey I agree with you he think he is the best lmao he also likes to talk crap about his workers he said he is joking but you can tell his not
I’m on my second day shingling a 12x12 with a hammer lol this guy is super amazing and he’s doing it safely. Great job!
Takes full advantage of the bounce in those basstadges. I know it well. But I could never control it. That's some surgical shyyt. Nothing but money. I bow.
Wow. Didn’t sacrifice quality just to add some speed. That is a damn good roofer.
Seen alot of these videos and seen alot in real life but this guy is actually fast
dude is insanely talented, I will admit that, I could never hope to be that fast, however he starts nailing about 1/3 of the way in so there is a large piece of each shingle on the outside edge without a nail in it.
He hits the end on while nailing the next shingle.
@@mrm8528 saw someone else say that and I had to rewatch it to see it. good call
I'm not sure why peo do that, to begin with
@@MathieusTheWalkingWitness its abut reach and ease of movement, its slower to reach over to the edge nail, hes basically hovering over the part he wants an d banging them off.
I wish the video was longer but this guy is just toooooo damn fast keep on brother
it sounds aggressive, from far away it sounds like a battlefield, nice work.
Calls Boss man before he gets to job site
"Yes sir I've finished shingling the roof can I go home for the day?"
Boss: "The fuck? It's only 9:30 in the morning!
Now this is a damn good roofer rt here. I'm not a roofer I'm a sheet metal worker but I've seen some great roofers in the field and this guy rt here is showing great work ethic
Your speed comes from how fast and consistently you can place the shingle before you nail it.... the machine what they used to call me and I would say the same to this man.... a machine... speaking from experience 25 years later your back hurts every day😪😪😪
@Eddie Yochim I guess I'm one of the lucky ones I'll be 58 next month and I'm in the middle of hand nailing 47 square roof.... don't get me wrong I do hurt and wake up stiff😎👍👍👍
Keep up the good work guy 👍 and you also rule because of the personal protection
I think this guy might secretly be a robot disguised as a human. Look at that speed and precision.
Man his nails are perfect too, credit to this guy,, who ever he’s working for, is making a fortune off him, you can pay him enough
Are you fucked? Half are high nails aka above the nail line/ double laminate. just cause there not face nails don't mean there strait or perfect the stager is way to small as well should be about 10 inches not 6.
@@buildurtruckurway9118 hes installing high grade shingles which ALL have a wide nailing strip that allowed a wider target . Stop bitching that hard worker
@@joeb787 lmao those do not have a 2 inch nail strip. You obviously don't know shit, even on say a malarkey, an owns Corning duration an Iko dynasty ect all shingles with a true 2 inch double laminate still require the nail as close to the line as possible. Haha its not a race track with 2 extra lanes. Also a proper manufacturers nail pattern is either a 4 nail or a 1. 2. 2. 1 not 5, not a strait 6. Going that fast I guarantee one out every 3 nails isn't flat I know from 11 years real world experience and making idiots rip shit off. It's called standards and if you don't stick to them your just a hack like the rest end of discussion.
Dudes a monster. Fastest shingler I’ve seen. And he’s doing it right too. Quality and speed
Would love to see the overall end of the job probably not straight no nail in the end the but ends look gap. Would love to see that nail pattern and how many shiners he gets.
Roof on brother, that's some fast nailing there, an I thought my uncle was fast, he should do them union roof races an c who is the man!
This is the closest I've seen to how I used to shingle! Great work man! That's efficiency
Dude is so fast UA-cam roofers didn't have time to tell him he's doing it wrong.
LoL
He is the fastest ive seen and I roofed 33 years
And the dude even has framer bags on and a rope and harness, thats tough.
Dude is talented. Nail placement is good and right on target
I like this kind of guys ...this is they way they give me lots of jobs fixing there mistakes ... because no one wants back to fix it
6 nail per shingles uuuuhhhh ???
Finally a real shingle who is actually fast not just claiming
I dont get why he puts the first nail in later but I like how he works, I do it the same the nailer comes with a gauge so we use it fastest way
@layne stayley learn how to fucking spell before you call me an idiot
@layne stayley fucking crackhead mom jokes are in the past you fucking 10 year old
He misses end nail u cam say he gets it on the next run up but he didnt
Some haters on here. I’m a roofer and I would hire you in a heartbeat
I love how he actually uses a safety harness. I would love to have had one when I was young. I know a guy who broke both his ankles from falling off a roof. He still has pain.
I friend of mine and fellow roofer fell from a roof and died before he got to the hospital
I fractured my heel a month ago falling down a 3 story
God dam he is good better roofer than any that I’ve seen , fast and nails are where there supposed to go way to go primo
anyone who has laid shingle knows this dude is talented, I'd I had to guess 90 percent of you couldn't even make it the ladeer
Him and I shingle just about the same but were required 6 nails . From my dad my uncles my brother's, I'm the only one that up and bent over. Uts faster I believe
He's not bro. He keeps missing the last nail on practically each shingle. 😊
He only puts 4 in the one he is currently hanging, and puts the 5th on in the shingle before it... so they are all still getting 5 nails
At least I can spell ladder
@@YankeeWoodcraft actually if you look hes skipping the first nail and putting it in with the next shingle actually saves time
The early part of the video is zoomed out very far. Jump to 2:11 to see how straight his nail rows are. Awesome.
Pointed left which direction compass galvanized
Only guy I seen so far that comes too me.
Right!
what is the point of the safety harness when he hooked up at the end
GODAMN THIS IS FAST AND PERFECT GOOD JOB PARTNER
Dude is definitely a Beast however the steps I feel are too short and some of his nails are further than an inch from the end of the shingle. Not taking nothing away from his skill he is definitely one of the fastest Shinglers I’ve seen.
His ladder looks like it’s up to code
Anybody know what manufacturer of the gun he is using? I’m a retired journeyman electrician so my hats off to any tradesman. Jeez…he even changed the coil of nails fast!
@@funnyharleyman Bostich
Gotta love them bostich nailers.! Good work.! Keep it between the lines brotha!!! 🤘
Ridgid is lighter and a little faster
@@dillonnj45l.18 Lol Rigid coil nailers may be lighter but they are junk.Dont last very long if you lay many squares everyday.If you only do shed roofs on the weekends you may be ok with rigid..lol Hitachi is ok but when they wear they shoot the nails in crooked...bostich is best.Especially for the price...My opinion.
@@Shift1dwn5up ive only done 600+ squares on the ridgid gun so far it's been great other than it doesn't shoot ridge cap nails for shit jams every other nail its lightweight and faster than any other gun ive used but we'll see how long it last
@@Shift1dwn5up but you are right the bostitch are great never a problem with them
Hitachis are the fastest, or they were a few years back. I have both, the bostitch is slower and more cumbersome somehow. I have thousands of hours on both. The bostitch is like a truck and the hitachi is like a motorcycle.
Great job! One of the best I've seen!
I have to say, that's pretty quick. About as quick as I've seen.
Shit Bags I believe you replied to the wrong one. I think he's pretty damn good.
@@lewisshepard9239 I agree lol
Lucky you get houses like that 👌🏽
can anyone explain why does he start so far in? dont you need nails across the entire piece??
Hey my friend can you give me the name that kind of shingles roofing 👍. Thanks ✌️
Damn home boi sound like he going to war the way that gum sounds.
On you tube
They show were to put the nails you might have to watch were the nails go and how many
I'm so impressed
Those safety lines should have a tensioner so there's not so much slack.If he fell he might as well hit the ground instead of hanging upside down 1ft from the ground.
This guy really is one of the best.
Nice work man. Good nail placement, using the guage, and fast.
Pero ni un clavo pone vien
Nice 👍
Just enough safety line to hit the ground 😂 but seriously though, homie can throw down! That’s impressive
He’s fast and on the line👍❗️
What type of nail gun does he have?
This is 100% the same way I do it. I'm not much slower then him. I love seeing people stip the first outside nail. Then hitting it at it's butted up to the next. Fast as fuck.
Lifetime dimentionals are 4 bundles per square. Nice
in order to nail like this ...you have to increase the pressure of the air compressor...so half of those nails are too deep inside the shingle.
Good technique by the way ...decrease the pressure , you'll nail slower but your nails will be just at the right dept.
Roofing Solutions by Eric Garcia no you don’t, it’s called a gas compressor
What in the hell did I just read. We use a rollair Gas compressor. Never had to increase anything. 6 of us nail like this at once hooked up to the same compressor with no issues, all nails at the right dept.
What the hell does increased pressure have to do with nailing speed? If you have the right compressor it's not an issue.
Putting opened bundles every 6 feet or so definitely helps so your not running around the place for shingles
Fast and straight rows. Very nice
Yep. He's quick. I'm not too shabby, but i like running out the horizontal farther. I'll run 3 rows (or whatever i can reach comfortably) across at a time. Then move up n do it again.
What nail gun is this roofer using ?
So why are the last couple nails so close together?
I’m obviously not a roofer, but shouldn’t the nails be evenly spaced?
cnvw974 you leave a gap between nail one and two so you can put the seam of the 2 shingles above in the gap. This creates a nice area for water to pass through without fear of a leak. If you had a nail on or really close to the seam it would create potential for a leak down the road.
In short it’s to prevent leaks.
drew baum oh ok, shingle line up, gotcha. Thanks
best I have seen. On the line every time.
Package says 4 nails. 5 is 25% waste. Could go even faster not having to reload so often
Could be code, In my area we have allot of extremely high winds and code calls for minimum 5, allot of guys do 6
@@jonathanvoigt2690 That code is bullshit. 4 is plenty
@@robdonna1000 lmfao
Make sure even if your the only one hooked up to the compressor add a extra take to get more presure in the hose and not let the gun lag or not nail correctly like a couple of times but besides that nice nailing you must be charging somewhere between 40 too 45 per square
That's about how I used to do it. But he should of just took that run straight up....
Great work!
He's the fastest guy I have ever seen
I'm curious why you don't nail the whole shingal but hit the end on the run back up
Everybody is a little different
No se trata de aserlo muy rápido se trata de que lo hagas correctamente es mi opinión Dios bendiga a toda las personas que pasen su trabajo correctamente.
I've watched this video 2 or 3 times and I've been trying to not comment. not be bashful. and I've actually tried to focus on the good in this video because there is some good. he's a very fast roofer. his shingles are probably straighter than you'd think. but my computer just cleared up and a lot of those nails aren't even close to where they should be. nails 2-4 are all over the board and the 5th nail he puts in the end of the shingle in the last run is closer to the seam than it is the edge. I wouldn't let him shingle LIKE THIS on my job. nail placement is key. I would tell him to slow the gun down a touch, put the dang nails where they go (at least 3 or 4 out 5 lets be real roofers here!), or come watch me do it. he's an animal for sure. but if you watch my videos, the nail placement is always correct, and I'm not blasting through the shingles as quickly as I can. anybody can slap on a square like this in no time w/o good quality and if that's all the point to this video was then well done.. but can you hold that pace all day? even for half a day, it won't last long believe me. slow is smooth, smooth is fast. good luck out there bud and shingle on!
Haters
THE ROOFER WITH NO POUCH .LOL
@@principexyno yes sir LMAO I'm sure you've watched my other videos and saw me siding or framing with TOOL BAGS ON. tool bags require a few tools to be worth wearing. This guy didn't need a hammer or a knife... therefore...he carried around that pouch weight for no reason lol it'll wear on you throughout the day and the week. Roofing on a Walker needs a gun in your hand, a knife in your pocket, and as long as you have a good gun and well managed compressor pressure you only need a hammer nearby. Nails can be spread out strategically so that they're nearby when needed and with experience you can place your hose in the right spot that you won't knock off many if any at all.. if you like that extra dumb weight by all means keep the dang bags on. But watch me blowout these roofers next weekend in my own shingling competition and let's see how you really feel
fuck off weirdo
@@franktib says the guy with a shy child as his profile picture... and liked videos are popular break dance moves from the 90's...btw.. if at 10 yrs old you didn't learn how to do the flare from your dad in the kitchen you don't need to learn now lol
World's fastest shinglers channel he was giving away a 100 dollar gift card to speedway for video entries....this guy could have won....
As a retired GC, I could care less how fast you can lay shingles. I saw a lot of guys who were fast and a lot of guys who were good, but just a few who were fast AND good. Way more important to do it right than to do it fast.
One man wrecking crew, roof the whole neighborhood solo.
In a day!
I usually gotta think I'm just as fast, but damn. Fast & accurate 👌.. I know everyone loves Hitachi /Metabo, but that Bostitch don't play. !! What I'm currently shooting 🔫
Wanna piss off neighbors after they hired a roofer.? Play this lol
4 nails per shingle vs. the 5 nails required for roof to be covered by manufacturer warranty
Warranty states 4 or 6 and he does 5
Nice , I'm still slow AF with a nail gun 😂
I laugh every time I see someone say hand nailing is faster 😂
Don't put the gun down,is the trick to going super fast. Like this guy, I was ridiculously fast. God bless him
Yes. But this guy is on another level. Perfect nail line and pattern. Lining em up quick. Best and fastest ive ever seen
No end nails?
just wondering, is there a reason you skip the right edge of the new shingle and only nail one in after the next one is on?
If you watch closely he gets it when he’s nailing the next shingle. It’s much faster this way instead of reaching/stretching far right, more work slower time. So when he is nailing he is pretty much centered without reaching.
Jala con madre este vato, de los mejores que he visto. Los envidiosos que escriben aqui no saben ni pasar un plomo de una y media compa. No les haga caso. Sigale pa elante!
El Roofero se la rifa sin guantes y con una pistola Hitachi no con esas Bostich
Las dos jalan bien, es cuestion de gusto. Con o sin guantes cada quien como ande mas agusto
No es que uno no sepa,he trabajado con ruferos dis que profesionales y he visto las chambonadas que dejan ,no se trata de hacerlo rápido sino bien, es mejor calidad que velocidad.
This is fucking unreal how quick he is
Anyone can make it sound fast but the work is what matters💯💯💯
No ice and water on the eave? 7 inch stagger? Fast tho